Van Remmen UV Technology products

The Legionella-Safe series is the user-friendly guardian in legionella management. The Legionella-Safe series is the user-friendly point of entry guardian in legionella management. Not only does it prevent legionella contamination, your organisation is also able to save on energy and labour. With the L-Safe systems, you have pre-filters, UV units, automatic valves, and connecting piping, all on a single frame. Volumes as low as 1.5m³/h and up to 60m³/h can be treated with just a single L-Safe system. This series is also BRL 14010-1 certified and can be applied in both priority and duty of care locations.

Advanox is the advanced oxidation solution (AOP) made by Van Remmen UV Technology. Advanox combines UV-C light with hydrogen peroxide to effectively break down micropollutants. In collaboration with research and engineering partners, we have developed advanced oxidation to complement UV-C disinfection. A powerful technology combining UV-C light with hydrogen peroxide or ozone. Advanced oxidation is capable of breaking down highly polluting micropollutants such as crop pesticides, medicine residues and organic substances (TOC). This enables Van Remmen UV Technology to always give you optimal results and solve your problem.

Validated System for Guaranteed Water Disinfection. We have developed the Validated series to demonstrably and reliably disinfect water with a transmittance value of 80% to 99%. Depending on the transmittance, capacities of 0.6m3/h up to 148m3/h can be treated. The system has been validated in accordance with NEN-EN 14897 standards and can be widely used for, for example, the drinking water market, process manufacturing, shipping, non-residential construction and installation technology. The Validated series can be used in series and in parallel.

The ideal choice for water disinfection for drinking water quality standards. Our Certified series supplies water with a transmission of approx. 80% to 99% of the quality of drinking water. All systems in this series have undergone an extensive certification process in order to guarantee these standards. Capacities of approximately 3.6m3/h up to and including 134m3/h can be treated at a dose of 400J/m2. However, this does depend on the transmission. By linking the measured UV intensity to the measured flow, the systems in this series determine the desired UV dose. If the UV dose does not meet the requirements, the process can be adjusted. If these adjustments cause the flow to be incorrect, the water flow will shut off. Not a single drop passes the system without the required UV dose.

The Swimming pool Intelligent series is specially designed for the microbiological disinfection of water in public swimming pools. The equipment has a range of approximately 56m3/h up to and including 414 m3/h based on a dose of 400J/m2 with a transmittance (T10) of 95%. The system has been tested in accordance with the NEN-EN 14897 standard and measurements have shown that our equipment guarantees disinfection and strongly reduces bound chlorine levels. You also save on top-off water, energy and use of chemicals with the Swimming pool Intelligent series.

Highly suitable for disinfecting waste water and reuse flows. The Waste series is a powerful UV-C disinfection system that can also be equipped with a manual or auto-clean system. By using a manual or auto-clean system, the contamination on the quartz tubes is minimal and we can guarantee the most efficient disinfection processes. Depending on the transmittance, capacities of 0.5 m3/h up to and including 120m3/h with a dose of 300J/m2 can be treated.

The all-round system for disinfecting process water, water for reuse, waste water and cooling water. The Process series is an all-round system that can be used for many applications. For example, for disinfecting process water, water that needs to be reused, waste water and cooling water. The Process series is able to disinfect liquids with a transmittance of 60% to 80%. With very limited maintenance costs and low energy consumption, the Process series can treat 360m3 per hour. The process series can also be used in series or parallel.

An efficient, user-friendly system for combating legionella. The Legionella Safe Dual series is a user-friendly gatekeeper for legionella prevention in your organisation. The entire renewed series is certified according to the revised BRL 14010-1 (Aug 2021) and can therefore be used in collective drinking water installations. One Legionella Safe Dual system can treat 2.1m3/h up to 35m3/h of incoming water. With our high-quality equipment, you not only prevent legionella contamination, you also have a sustainable solution that cuts maintenance costs and energy.

Used to determine the exact UV-C transmittance in water and other liquids. It is easy to see if a liquid is cloudy, but the exact transmittance is impossible to determine with the naked eye. To be able to measure the exact light permeability of the water (transmittance), we have various transmittance meters in our range.

For powerful disinfection of product surfaces, packaging and conveyor belts. The Surface Disinfection series disinfects surfaces of, for example, packaging, products and conveyor belts. The installation can be applied as a modular system with a compact shape due to the use of flat lamps, Teflon foil and an optimised reflector. As a result, you are assured of high output and you are flexible in terms of use. In addition, our modular equipment is easy to use and easy to keep clean.