Ventilator Klima Tehnika products

SV centrifugal fans are middle-pressure fans that are mostly used in energy industry as forced draft fans, marine industry aswell as in process industry. SV fans are capable for transport of high temperature gases.

NVT centrifugal fans are low-pressure used for ventilation in places were required pressure does not exceed 1500 Pa and air flow requirements are in between 0.1 and 20 m3/s. In case of direct drive air temperature should not exceed 60°C or 100°C in case of belt drive.

SPV centrifugal fans are middle-pressure fans used where required pressure rise is between 700 and 3500 Pa and/or were air flow is between 0.3 and 22 m3/s. Air Temperature should not exceed 199°C. SPV fans are especially good as forced and induced draft fans for smaller boiler plants and for industrial ventilation systems in which is required higher static pressure rise.

STV centrifugal fans are middle pressure fans. They have extremly stabile performance curve.

TSV transport fans are used for pneumatic transport of material particles in industrial environment.

KRV roof fans are manufactured in 2 versions: horizontal and vertical exhaust

AV axial fans are made of steel housing and aluminum cast impeller with fixed blades. AV axial fans are manufactured in sizes from housing diameter 250 mm to 1200 mm.

Industrial Air heaters type NVGT use hot/cold water, steam or thermo oil as their working medium. NVGT air heaters are manufactuerd in 2 versions: with steal heat exchanger or with Al-Cu heat exchanger.

ENVGT electrical air heaters have its design adapted for heating and ventilation of industrial halls, workshops, warehouses, hangars, social rooms, shops, greenhouses, farms and so on. In order for our heaters to work in all conditions and modes that our customers require, we have developed a large number of elements used as accessories such as:

Cyclones are used for separation of mechanical impurities or of transport solid particles out of air stream. Separation of particles is done on the basics of centrifugal force because of which solid particles (which are heavier) are pushed to the inner surface of cyclone. These particles are then pulled down by gravity while pure air is being extracted on the top of the cyclone.