Verder Liquids BV - part of the Verder Group articles
Learn how Visy saved time and money by using a Verderflex peristaltic pump.
Challenge
Visy, a 4-colour printing business, uses pumps to deliver inks to its printers. The AODD pumps they were using considerable amounts of compressed air and required constant maintenance due to the wearable parts (seals and valves).
This was resulting in unacceptably long downtimes and high cost of repair and part
Challenge
One of the largest UK manufacturers of fresh dairy products for the food industry was using air diaphragm pumps to dose peracetic acid into the final rinse water of both raw and finished CIP (Clean-in-place) routines.
CIP (Cleaning-in-place) is a critical hygiene process that helps to maintain the hygienic condition of the process line without the need for dismantling of the pump and pipe work.
In order to meet the M&S specificat
Challenge
One of the largest UK manufacturers of fresh dairy products for the food industry was using air diaphragm pumps to dose peracetic acid into the final rinse water of both raw and finished CIP (Clean-in-place) routines.
CIP (Cleaning-in-place) is a critical hygiene process that helps to maintain the hygienic condition of the process line without the need for dismantling of the pump and pipe work.
In order to meet the M&S spec
Challenge
A leading paper and packaging manufacturer in Australia was using Air-Operated Double Diaphragm (AODD) pumps to deliver 4-colour ink to its printers. The on-site AODD pumps were using considerable amounts of compressed air and required constant maintenance due to the wearable parts (seals and valves). This was resulting in unacceptable long downtimes and high cost: for repair and purchase of new parts. The customer requested for pumps that could offer
At the end of its’ life, a car yields on average, 140 kilos of shredder waste: 26 kg of metals, 69 kg of plastics, 11 kg of minerals and 24 kg of fibres. In Tiel, Netherlands, a Post Shredder Treatment plant (PST) was built in 2011, for the recycling of cars.
The PST plant is one of the two plants in Europe that are able to recycle to approximately 95% of the waste materials. Aiming for 100% recycling, continuous research and development is conducted in the
Verderflex provided a cost effective solution to a Swiss airport that had been experiencing significant problems with their water softening treatment. The local water supply required treatment to prevent scaling in the pipework.
The Challenge
The existing treatment system required a salt solution to be dosed from a storage tank close to the pumps over a 350m pipe-run to the water supply. The piping system had a series of valves a
The Challenge
A water treatment plant in the US state of Georgia uses several wells to provide its residents and industries with fresh water. Each well site had to be equipped with the appropriate treatment equipment to ensure that the water meets and exceeds regulatory requirements.
One such well site used a diaphragm-style reciprocating metering pump to pump lime slurry directly into the well output. The well runs about 12 hours per day and discharges either
The Challenge
One of the largest UK manufacturers of fresh dairy products for the food industry was using air diaphragm pumps to dose peracetic acid into the final rinse water of both raw and finished CIP (Clean-in-place) routines.
CIP (Cleaning-in-place) is a critical hygiene process that helps to maintain the hygienic condition of the process line without the need for dismantling of the pump and pipe work.
In order to meet the M&S specification t
The Challenge
An industrial waste water treatment company required a cost effective solution to pumping polyelectrolyte.
The plant engineers approached Verderflex distributor, Global Pumps Australia, for a solution to the following problems:
- Existing helical rotor pumps were expensive to run and maintain
- The replacement pump would have to be able to transfer liquid polymer which is a thick, viscous liquid mixed with a 30% kerosene (hyd
The Challenge
A leading multi-national electronics company with numerous plants across South Korea has for many years been using Metering pumps for dosing Aluminium Sulphate in their wastewater treatment facilities.
The plant engineers approached the local Verderflex distributor Dong-Il Ent Co Ltd, looking for a solution to the following problems
- Inconsistent dosing of Aluminium Sulphate when tank levels were low