Xenemetrix Ltd. products

The new induction fluxers F1 and F2 have been specially created to speed up and facilitate the process of preparation of glass discs for their analysis via XRF, and solutions of AA for ICP. They can produce, accurately and fast, beads and solutions with classical flux (Borates) as well as undertaking high quality fusions of non oxidized elements with peroxide. It is effective both in high and in low temperatures. They can easily adapt to your production needs, as it is designed to accept up to ten fusion modules using the same control unit, becoming that way a real Production and Control System of discs and solutions. Also, both equipment admit crucibles of different materials, such as platinum, zirconium, nickel, etc., as the unit adjust automatically the best frequency of the resonant system for the type of crucible being used.

The versatility of the new MultiEQP-100 makes of this unit and essential instrument for the treatment and manufacturing of metallic samples. Effective for cutting, crushing and punching metallic samples, you can also include the capacity for pressing pellets that will be analyzed afterwards by RX. The objective of punching the samples is the obtention of pins for their analysis in Elemental Analyzers.

The Vibratory Disc Mill is crushing unit specially designed to obtain grain sizes from a wide range of samples, such as glass, earth, slag, metallic oxides, ferroalloys, cements, ceramic elements, amongst other. It can quickly crush a great variety of different materials, from semisoft materials to the hardest, fragile or fibrous. Its simplicity of use and sturdiness make of this it a practically maintenance free unit..

The preparation of metallic samples is made nowadays using varied and different ways – according to the hardness of the metal -. Many times, the preheating of the sample is necessary in order to soften the metal and thus facilitate its subsequent processing, whether by crushing or punching. The EQH- 3.0 Induction Heater has been specially developed for heating up lollipops and bars for their fast softening.

To obtain truly representative results in RX or LIBS, the samples require a preparation of an excellent finish. Very flat surfaces, regular and without cracks. Therefore, the manufacturing of the disks must guarantee a high degree of cohesion and stability. The EQP-100 Press is specially designed to obtain the best results when making the pellets. Of robust and durable design, it has got a simple working system and is really effective, and it is the only one in the market offering up to five working programs in single or double cycle.

Obtaining truly representative results in RX or LIBS depends very much on the previous step, the manufacturing of the pellet. The Hydraulic Manual Pellet Press EQO-1 has been specially designed to achieve high quality pellets, homogeneous and stable. Able to apply pressure up to 20 tons, it is simple and safe to manage, and it occupies very little room in the laboratory.

Thanks to its capacity to quickly crush, mix and homogenize small volumes of sample, the EQM-400 Mill is your great ally for the preparation of samples. This Mill has been designed for the final preparation of small volumes of hard, semi-hard and fragile samples – up to 15 g. -. It can prepare two samples simultaneously and reduce them parting from an initial size of 0.8 to 1.5 mm. until sizes of less than 10 μ in short periods of time – 1 to 4 minutes -.