Yingkou Tiancheng Fire Fighting Equipment Co. Ltd products

TCMK5216 Output Module(Broadcasting Module). Voltage:Loop:DC24V . (16V~28V); Power: DC24V (20V~28V). Standby Current:Loop: ≤0.2mA;Power: ≤2mA. Action Current:Loop: ≤1.5mA;Power: ≤15mA.

Voltage:DC24V. Current:0.16A. Operating Environment:Temperature: -10°C~+50°C; Relative Humidity: ≤95%. Working Mode:Integrated with JB-TG-TC5000/JB-LT-TC5200. Dimension:482mm×170mm×133mm. Approval:CCCF, CE.

JT-TC516Combustible Gas Detector With Measuring Range of 0~100% LEL-tiancheng(TC). It adopts advanced normal temperature semiconductor gas sensor, microprocessor combined with precision temperature sensor can intelligently compensate the drift of gas sensor, and the environmental adaptation range is wide

The detector has the good suppression of fluorescent lamps, incandescent lamps, artificial light sources, environment (people, etc.), heat radiation, mechanical vibration, etc.  Detectors are suitable for the detection of gas fires and smokeless liquids as well as open flames that generate smoke, such as open flames of carbon (wood, chemical plastics, alcohol, petroleum products, flammable gases, etc.), not for the combustion of certain chemicals (phosphorus) , magnesium, hydrogen, etc

The detector has the good suppression of fluorescent lamps, incandescent lamps, artificial light sources, environment (people, etc.), heat radiation, mechanical vibration, etc

Non-addressable sounder. Suitable for installation in explosive gas environment with IIC and T6 temperature groups. Explosion-proof form: explosion-proof type. Explosion-proof mark: Exd IIC T6 Gb. Working voltage: DC24V±6V.

The monitoring module uses dot matrix liquid crystal display information to be intuitive, easy to operate and easy to use
The address code is electronically encoded and can be written in advance by the electronic encoder. The engineering debugging is simple and reliable. Monitor the operation status by the low-power CPU, and transfer the status of the module to the monitoring host in both normal and fault modes. Ability to upload current status values of monitored devices in real time. Wire system: It is connected to the monitoring host by a non-polarity signal two bus, and the power cable is connected by a non-polar two-wire system. Dimensions: 110mm × 92mm × 67mm.