Zhejiang Huita Optoelectronic Material Co.,Ltd products

Evaporation Materials

Huita - Model SiO2- 202192154835 - Coating Granules

Application: cold light film; Filter; Insulating film; Glasses coating; Anti ultraviolet film

Huita - Model BaF2- 20219211313 - Granule

Application: optical glass, optical fiber, laser generator.

Sputtering Targets

Huita - Model ITO -202194211722 - Sputtering Targets

Hot isostatic pressing method. Hot pressing method. Sintering method.

Huita - Model TiOx -202193115125 - Ceramic Targets

Preparation method includes: proportioning raw titanium oxide and Ti according to TiOx, where x is between 1.68-1.80 and mixed evenly; Forming by hot pressing or cold pressing to make the required shape; Put the material in the crucible or special tooling, transfer it to the vacuum sintering furnace, vacuum the whole system, raise the temperature to 1400 ~ 1800 ?, keep it for 2 ~ 8 hours at the maximum temperature, and then start cooling to prepare titanium oxide material.

Huita - Model ZnS -202192155813 - Tablet Sintering Ceramic Targets

Applications: laser anti-counterfeiting, decorative film, cold light film, filter, high reflection film, infrared film.

Optical Elements

Huita - Model 20219910611 - Infrared Ge Lens

Application : Night vision equipment, detectors, surveillance equipment.

Huita - Model 20219992611 - Infrared Inspection Windows

Infrared window is mainly used for internal temperature measurement of various high-voltage switchgear, metal armored cabinet, urban ring network cabinet and GIS high-voltage equipment. Eliminate the risk of high voltage arc accident during heating imaging inspection. The infrared window can penetrate ultraviolet and visible light. The infrared optical window is installed on the shell of the electrical cabinet. The infrared thermal imager and thermometer commonly used in the power system are used to identify the heating fault in combination with the infrared guide. Through the infrared window, it is convenient to carry out various nondestructive maintenance for the internal equipment of the electrical cabinet and realize the condition inspection.

Crucibles & Boat

Huita - Model 20219310388 - Tungsten Crucibles

Be made of metal tungsten. It has the characteristics of high melting point, high strength and hardness, good high temperature performance, low resistivity, small expansion coefficient and small electron escape work. It is an important component of sapphire long crystal furnace. Manufacturing process: sintering forming, welding forming, stamping forming and spinning forming, among which sintering products are most widely used. For micro and small tungsten crucibles, forged tungsten rods can be used for turning or stamping. The welding process of tungsten sheet adopts hot bending of rolled tungsten plate, which is finally fixed by welding. Spinning is suitable for producing thin-wall tungsten crucible with high process requirements.

Huita - Molybdenum Crucibles

Be made of Mo-1 molybdenum powder, and the service temperature is 1100 ? ~ 1700 ?.