100XP - Fluid Bed- Brochure

Applied Chemical Technology continues to pro-vide new and improved fluid-bed technology to industry with the 100 XP Explosion Proof Fluid- Bed. The 100XP withstands maximum devel-oped pressures up to 12 bar. The gas stream can be vented or recirculated. A solvent recovery system is optional. Sanitary fittings on the duct-work components allow the unit to be easily dis-assembled for cleaning. The 100 XP unit is a multipurpose fluid-bed for small scale coating, granulating, and drying appli-cations. It is ideal for process development and for collecting scale-up data for commercial proc-esses. The standard oil heater provides a maxi-mum operating temperature of 200°C. An op-tional hot water/chiller system is available for sol-vent recovery systems. UTILITY REQUIREMENTS FOR THE 100XP Electrical Oil Heater Current: 30 amp Phase: 1 Voltage: 230 V Water Heater 30/15 amp 3 230/460 V Water Flow Rate: 2-4 GPM Inlet Temp: 35-70°F Compressed Air Flow 1-2 cfm PSIG 60 psi Inert Gas Flow* Flow 1-5 scfh *i.e. Nitrogen, Argon, etc. 100XP • 5 liter bowl capacity, batch fluid-bed with internal baghouse • Explosion proof construction to meet Class I Div II specifications • Internal baghouse equipped with Teflon coated bags • Manual pulsejet bag cleaning system (automatic pulse is available) • Explosion proof: 12 bar shock rated • Maximum temperature: 200°C • Material of construction: 316 Stainless Steel (parts in contact with product) • Capable of re-circulating or venting the gas stream • Air atomized removable stainless steel spray system • Top and bottom spray configuration • 316 SS upper housing with glass view port • Cooling/heating coils—does not include chiller for solvent recovery • Blower: — Variable speed — Maximum airflow is 70 cfm — 40 in. w.c. static pressure • Ductwork exhaust flanged to facilitate connection of additional piping. • Includes: — O-rings for sealing distributor plate and product chamber — Air pressure regulator — Air pressure gauge • Instrumentation includes: — Air flow measurement — Inlet air temperature — Outlet air temperature — Temperature controller — Transmitters are PLC/DCS compatible — Differential pressure gauge across bed — Differential pressure gauge across bags • Optional oil/water heater system • Optional chiller system for solvent recovery • Optional sanitary viewports A front view of basic 100XP shown with standard features including heating and cooling coils A top view of basic 100XP shown with standard features Applied Chemical Technology, Inc. 3450 Helton Dr., Florence, AL 35630 (800)ACT-3217 www.appliedchemical.com act@appliedchemical.com