13D - Home Defender Residential Fire Pump Brochure

AC D200713D Home Defender™ UL-LISTED RESIDENTIAL FIRE PUMP FOR ONE OR TWO FAMILY HOMESThe Home Defender is UL-listed (UL 448B) specifically for residential fire pump service.With a flow range from 30-60 GPM and a pressure range from 30-55 PSI, the Home Defender is designed to boost water pressure for automatic residential sprinkler systems.The system is complete and ready for easy installation with the pump, motor, control panel, discharge isolation valve, check valve, test inspection and pressure gauge all pre-assembled. The unit comes pre-wired, pre-piped and pre-tested. The close-coupled end suction pump features stainless steel construction.Selection Chart:Contractor shall furnish and install an A-C 13D residential fire pump that is UL 448B listed for residential fire pump service. The pump shall be close coupled end suction with 316L stainless steel wetted parts.The pump shall be rated for GPM with a rated discharge pressure of PSI while operating at 3550 RPM. The motor shall be HP single phase, 220 volt of the 56J shaft design, ODP enclosure with a 1.15 minimum service factor.The control shall be tested to UL 508A standards. The enclosure shall be Nema 1 design with run period timer, and local and remote alarm contacts.The system shall be pre-assembled at the pump manufacturer’s facility on a common mounting support with a discharge control valve, discharge gauge, check valve, inspection & test connection, casing relief valve and pressure switch. The pump shall be performance and hydrostatically tested in accordance with UL 448B prior to shipment.HP OVERALL DIMENSIONSAll dimensions are in inches. All are approximate.CONNECTIONS1.5-3 18”L X 13”W X 29”H 1.5” FNPT5 19”L X 14”W X 30”H 1.5” FNPTSample Specification: 13D Home Defender Series Residential Fire Pump• Automatic start on pressure drop• Automatic stop on pressure restoration• 316L stainless steel wetted parts make this pump suitable for fire and domestic water service• Running period timer adjustable up to 5 minutes prevents the unit from oscillating on and off• Option for flow switch• Discharge isolation valve• Discharge pressure gauge• Check valve in discharge piping• Drain and test valve connection• Casing relief valve to prevent overheating• Contacts for local and remote alarm for pump running or water flow• 1.5, 2, 3 or 5 HP single phase 220 volt service• Performance and hydrostatic test on every unit• Control panel tested to UL 508A and CSA 22.2 #14 Standards by Canadian Standards Association• Optional storage tank required where stored water is the sole source of supplyNOTE: This product is not intended for potable water applications.System Features:Xylem Applied Water Systemsa division of Xylem Canada Company55 Royal Road, Guelph, OntarioN1H 1T1, CanadaPhone: (519) 821-1900Fax: (519) 821-5316A-C Fire Pump is a trademark of Xylem Inc. or one of its subsidiaries.© 2012 Xylem Inc. AC D2007 January 2010Xylem Inc. 8200 N. Austin Avenue Morton Grove, Illinois 60053 Phone: (847) 966-3700 Fax: (847) 965-8379www.xyleminc.com/brands/acfirepumpHP OVERALL DIMENSIONSAll dimensions are in inches. All are approximate.CONNECTIONS1.5-3 18”L X 13”W X 29”H 1.5” FNPT5 19”L X 14”W X 30”H 1.5” FNPTPump SizeRPMFlow GPMPSIImpeller SizeHP Ordering Code2ST 3500 30 30 4-5/8 1-1/2 FG-13DFP0DF3A035 4-7/8 2 FG-13DFP0CG3B040 5-1/16 3 FG-13DFP0BH3C045 5-1/4 3 FG-13DFP0AH3D050 5-1/2 5 FG-13DFP0HJ3E055 5-15/16 5 FG-13DFP0GJ3F040 30 4-5/8 1-1/2 FG-13DFP0DF4A035 4-7/8 2 FG-13DFP0CG4B040 5-1/16 3 FG-13DFP0BH4C045 5-1/4 3 FG-13DFP0AH4D050 5-1/2 5 FG-13DFP0HJ4E055 5-15/16 5 FG-13DFP0GJ4F050 30 4-5/8 1-1/2 FG-13DFP0DF5A035 4-7/8 2 FG-13DFP0CG5B040 5-1/16 3 FG-13DFP0BH5C045 5-1/2 5 FG-13DFP0HJ5D050 5-15/16 5 FG-13DFP0GJ5E055 5-15/16 5 FG-13DFP0GJ5F060 30 4-7/8 2 FG-13DFP0CG6A035 5-1/16 3 FG-13DFP0BH6B040 5-1/4 3 FG-13DFP0AH6C045 5-1/2 5 FG-13DFP0HJ6D050 5-15/16 5 FG-13DFP0GJ6E0