2R9 & 2R10 Series Brochure

2R9 & 2R10Model 2R9 & 2R10The EXCEL® Model 2R9/2R10 bales the following materials: Office Paper, Newspaper, OCC, magazines, PET, HDPE, Aluminum Cans, Tin Cans, PaintedAluminum Siding, Insulated Wire, Aluminum Extrusions, Radiators, Copper Wire and OtherMaterialsStandard Features Include• The 2R9/2R10 is manufactured standard with either left-hand or right-hand eject• Operator-Free Operation• 50 HP TEFC Motor, Standard Voltage - 460 Volt, 60 Hertz, 3 Phase (2-50 HP, 2R10)• EXCEL® Autonetics™ with Absolute Ram Position Sensor with Electronic Display• U.S. Wire Tie Systems Automatic 342 Tier with Turbo Motor• Industrial Hardened Logic Controller• Fully Lined with Hardox® 400 Replaceable Wear Liners• 300 Gallon Hydraulic Reservoir with Regenerative Circuit (600 gallon 2R10)• One Year EXCEL® Limited Warranty US only• Upper, Middle, and Lower Photo Eyes(sender/receiver upper photo eye with integrated conveyor control)• NEMA 12 rated Enclosures and Controls with Conveyor Starter• Installed and Working Modem for On-Line Diagnostics• Castle Key Safety Interlocking Entry System• Bale Chamber Penetration (2R9 - 27”)(2R10 - 24”)• Automatic Bale Release Door• Automatic Shear Jam Correction• Bale Discharge Platform• One Spool of 12 Gauge Ultra High Tensile Galvanized Wire• Sandblasted, Primed, and Painted Excel Blue for Long Lasting Durability• Air to Oil Heat Exchanger• Integrated Steel Platen Wiper• UL, CUL Approved (CE Available)• Bale Counter• Hardened, Serrated, Turnable Cutting Knives• Hour Meter• 9” Eject Cylinder• Separation Door for Solid Waste and Scrap Applications (Available Option)• Available with EXCEL® integrated conveyors with rubber or steel belts for a turn-key systemEXCEL®couples interlocking construction with the most advancedcontrol system in the industry for an indestructible, automated2RAM Baler. EXCEL’s®design for automated operation eliminatesthe need for a full-time operator. EXCEL’s®superior quality means reduced down time,automatic operation and dramatic labor savings.STRUCTURALPERFORMANCE DATABALE WEIGHTS*GENERAL SPECIFICATIONS2R9 2R1028’7” (8.75 meters) w/stairs) 33’10” feet (10.09 meters) w/stairs13’3” (4.05 meters) 13’5” (4.11 meters)8’8” (2.68 meters) 8’8” (2.68 meters)40”W x 65”L (102cm x 165cm) 40”W x 90”L (102cm x 229cm)3/4” Thick Plate plus 3/8” Hardox 400 Liner 1” Thick Plate plus 3/8” Hardox 400 Liner3/4” Plate plus 3/8” Hardox 400 Liner 3/4” Plate plus 3/8” Hardox 400 Liner47,500 lbs (21,545kg) 58,000 lbs (26,308kg) (with bale separation door) (with bale separation door)9”(22.9cm) bore x 106” (269cm) stroke 10”(25.4cm) bore x 130” (330cm) stroke 6”(15.2cm) hardened chrome rod 7”(17.8cm) hardened chrome rod9”(22.9cm) bore - 6”(15.2cm) chrome rod 9”(22.9cm) bore - 6”(15.2cm) chrome rod300 gallons (1,137 liters) 600 gallons (2,273 liters)100 GPM (379 liters) 200 GPM (758 liters)50 HP TEFC 460V, 3 Phase 2-50 HP, TEFC, 460V, 3 Phase3,000 PSI Automatic Mode (3,250 PSI Maximum) 3,000 PSI Automatic Mode (3,250 PSI Maximum)190,851 lbs. / 206,756 lbs. Maximum 235,619 lbs. / 255,254 lbs. Maximum154 PSI / 166 PSI Maximum 190 PSI / 205 PSI Maximum20 seconds 16 seconds60”L X 45”W X 30”H (152cm x 114cm x 76cm) 60”L x 45”W x 30”H (152cm x 114cm x 76cm)46.88 cu.ft. (1.33m3) 46.88 cu.ft. (1.33 m3)1,400 lbs (635kg) 8 TPH 1,500 lbs (680kg) 15 TPH2,400 lbs (1,088kg) 20 TPH 2,400 lbs (1,087kg) 25 TPH1,600 lbs (726kg) 15 TPH 1,700 lbs (771kg) 25 TPH1,300 lbs (589kg) 5 TPH 1,350 lbs (612kg) 8 TPH1,200 lbs (544kg) 6 TPH 1,325 lbs (601kg) 9 TPH2,000 lbs (907kg) 15 TPH 2,200 lbs (997kg) 25 TPH800 lbs (362kg) 6 TPH 1,000 lbs (453kg) 9 TPH2,000 lbs (907kg) 15 TPH 2,200 lbs (998kg) 20 TPH1,400 lbs (635kg) 6 TPH 1,500 lbs (680kg) 9 TPH2,000 lbs (907kg) 7.5 TPH 2,200 lbs (998kg) 11.5 TPH1,800 lbs (816kg) 8 TPH 2,000 lbs (907kg) 12 TPH3,500 lbs (1,587kg) 15 TPH 3,700 lbs (1,678kg) 22 TPH1,500 lbs (680kg) 6 TPH 1,700 lbs (771kg) 10 TPHOVERALL LENGTH (A)OVERALL WIDTH (B)OVERALL HEIGHT (C)FEED OPENING (D)CHAMBER FLOORCHAMBER SIDEWALLSSHIPPING WEIGHT(APPROXIMATE)MAIN CYLINDEREJECT CYLINDEROIL RESERVOIRINDEPENDENT PUMPSMOTORSSYSTEM PRESSUREOVERALL PLATEN FORCEPLATEN FACE PSICYCLE TIMEESTIMATED BALE SIZE(ADJUSTABLE)OCCMAGAZINESNEWSPRINTHDPE PLASTICSPET PLASTICSSOLID WASTEALUMINUM CANSTIN CANSALUMINUM EXTRUSIONSPAINTED ALUMINUM SIDINGRADIATORSINSULATED COPPER WIREMISC. NON-FERROUS SCRAPEXCEL Manufacturing, Inc.P.O. Box 428 • 778 W. 12th St.St. Charles, MN 55972(507) 932-4680 • fax (507) 932-4683www.excelmfg.com(800) 475-8812Note: To provide our customers with the best possible equipment, and offer the latest in product improvements, these specifications are subject to change without notice, and without incurring responsiblity to unites previously sold.Due to Equipment Upgrades * Bale Weights are based on actual customer surveys, and may differ due to moisture content, material density, etc.Form 2Revised Oct. 2008Overall dimensions and shipping weight may vary with options