3150 - Graco SaniForce Brochure

SaniForce®Drum Unloaders for the Sanitary IndustryInflatable wiper seals for increased efficiency and faster change-out of containers• Over 99% evacuation rate• Sanitary flange clamps for quick disassembly• Liner guard to prevent bags from entering pump• One size follower plate and seal to accommodate straight-sided and tapered drumsCall today for product information or to request a demonstration. 877.84GRACO (1-877-844-7226) or visit us at www.gracosaniforce.comAll written and visual data contained in this document are based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice.©2011 Graco Inc. Form No. 338590 Rev. D 12/11 Printed in the U.S.A. All other brand names or marks are used for identification purposes and are trademarks of their respective owners. Technical SpecificationsSanIForce 6:1 pISTon pUmp packageS Double Ball pump priming pistonMax. fluid pressure . . . . . . . . . 600 psi (41 bar, 4.1 MPa) . . . . .600 psi (41 bar, 4.1 MPa)Max. flow @ 60 cpm* . . . . . . . . . . . 4.0 gpm ( 15.1 lpm) . . . . . . . . .4.0 gpm ( 15.1 lpm)Viscosity range of package . . . . . . . . 25,000-60,000 cps . . . . . . . . 60,000-100,000 cpsMax. inlet air pressure . . . . . . . 100 psi (7 bar 0.7 MPa) . . . . . . 100 psi (7 bar 0.7 MPa)Air inlet size (enclosed, exposed) . . . .1/2 npt(f), 3/4 npt(f) . . . . . . . . . 1/2 npt(f), 3/4 npt(f)Evacuation efficiency . . . . . . . . . . . . . . . . . . . . . . . . 99% . . . . . . . . . . . . . . . . . . . . 99%Instruction manual . . . . . . . . . . . . . . . . . . . . . . . 3A0591 . . . . . . . . . . . . . . . . . .3A0591 SanIForce 5:1 pISTon pUmp packageS Double Ball pump priming pistonMax. fluid pressure . . . . . . . . . 400 psi (28 bar 2.8 MPa) . . . . . 400 psi (28 bar 2.8 MPa)Max. flow @ 60 cpm * . . . . . . . . . . . . . . 14 gpm (53 lpm) . . . . . . . . . . . 14 gpm (53 lpm)Viscosity range of package . . . . . . . . 25,000-60,000 cps . . . . . . . . 60,000-100,000 cpsMax. inlet air pressure . . . . . . . . 80 psi (5 bar 0.5 MPa) . . . . . . . 80 psi (5 bar 0.5 MPaAir inlet size (enclosed, exposed) . . . .1/2 npt(f), 3/4 npt(f) . . . . . . . . . 1/2 npt(f), 3/4 npt(f)Evacuation efficiency . . . . . . . . . . . . . . . . . . . . . . . . 99% . . . . . . . . . . . . . . . . . . . . 99%Instruction manual . . . . . . . . . . . . . . . . . . . . . . . 3A0591 . . . . . . . . . . . . . . . . . .3A0591 SanIForce 12:1 pISTon pUmp package priming pistonMax. fluid pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1200 psi (83 bar, 8.3 MPa)Max. flow @ 60 cpm* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.5 gpm (32 lpm)Viscosity range of package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60,000 to 250,000 cpsMax. inlet air pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100 psi (7 bar, 0.7 MPa)Air inlet size (enclosed, exposed) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2 npt(f), 3/4 npt(f)Evacuation efficiency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99%Instruction manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3A0591SanIForce 3150 HS pUmp package High Sanitation Double DiaphragmMax. fluid pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 psi (8.4 bar, 0.84 MPa)Max. flow @ 60 cpm* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 gpm (234 lpm)Max. flow @ 100 cpm* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 gpm (390 lpm)Max. inlet air pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 psi (8.4 bar, 0.84 MPa)Air inlet size (enclosed, exposed) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2 npt(f), 3/4 npt(f)Evacuation efficiency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99%Instruction manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3A0591SanIForce 2150 pUmp package Double DiaphragmMax. fluid pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 psi (8.4 bar, 0.84 MPa)Max. flow @ 60 cpm* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 gpm (234 lpm)Max. flow @ 100 cpm* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 gpm (390 lpm)Max. inlet air pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 psi (8.4 bar, 0.84 MPa)Air inlet size (enclosed, exposed) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2 npt(f), 3/4 npt(f)Evacuation efficiency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99%Instruction manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3A0591* Flow rates based on full displacement of lower and S.G. = 1ordering InformationSanIForce 6:1 pISTon pUmp packageSpart no.pump no. pump Typeram materialram plate no.Inflatable Seal no. control TypeWeight lb (kg)24D776 24G739 Priming Piston SST 16G240 16G242 Exposed 353 (160)24D780 24G739 Priming Piston CS** 16G240 16G242 Exposed 372 (169)24D782 24G739 Priming Piston SST 16G240 16G242 Enclosed SST 367 (166)24D788 24G740 Double Ball SST 16G240 16G242 Exposed 356 (161)24D792 24G740 Double Ball CS** 16G240 16G242 Exposed 375 (170)24D794 24G740 Double Ball SST 16G240 16G242 Enclosed SST 370 (168)SanIForce 5:1 pISTon pUmp packageSpart no.pump no. pump Typeram materialram plate no.Inflatable Seal no. control TypeWeight lb (kg)24D708 24G741 Priming Piston SST 16G240 16G242 Exposed 413 (187)24D712 24G741 Priming Piston CS** 16G240 16G242 Exposed 433 (196)24D714 24G741 Priming Piston SST 16G240 16G242 Enclosed SST 428 (194)24D720 24G742 Double Ball SST 16G240 16G242 Exposed 417 (189)24D724 24G742 Double Ball CS** 16G240 16G242 Exposed 437 (198)24D726 24G742 Double Ball SST 16G240 16G242 Enclosed SST 432 (196)SanIForce 12:1 pISTon pUmp packagepart no.pump no. pump Typeram materialram plate no.Inflatable Seal no. control TypeWeight lb (kg)24D647 24F625 Priming Piston SST 16G240 16G242 Exposed 440 (200)24D651 24F625 Priming Piston CS** 16G240 16G242 Exposed 459 (208)24D653 24F625 Priming Piston SST 16G240 16G242 Enclosed SST 454 (206)24F188+ 24F626 Priming Piston SST 16G240 16G242 Exposed 440 (200)24F189+ 24F626 Priming Piston CS** 16G240 16G242 Exposed 459 (208)24F190+ 24F626 Priming Piston SST 16G240 16G242 Enclosed SST 454 (206)SanIForce 3150 HS pUmp packagepart no.pump no. pump Typeram materialram plate no.Inflatable Seal no. control TypeWeight lb (kg)24D922 24C124 Ball SST 16G241 16G242 Exposed 428 (194)24D926 24C124 Ball CS** 16G241 16G242 Exposed 443 (201)24D928 24C124 Ball SST 16G241 16G242 Enclosed SST 442 (200)24D932 24J388 Ball CS** 16G241 16G242 Exposed 443 (201)24D936 24J388 Ball SST 16G241 16G242 Enclosed SST 442 (200)24D940 24J388 Ball SST 16G241 16G242 Exposed 428 (194)24J364 24J389 Ball SST 16G241 16G242 Exposed 428 (194)24J365 24J389 Ball CS 16G241 16G242 Exposed 443 (201)24J366 24J389 Ball SST 16G241 16G242 Enclosed SST 442 (200)24D944 248274 Flapper SST 16G241 16G242 Exposed 428 (194)24D948 248274 Flapper CS** 16G241 16G242 Exposed 443 (201)24D952 248274 Flapper SST 16G241 16G242 Enclosed SST 442 (200)SanIForce 2150 pUmp packagepart no.pump no. pump Typeram materialram plate no.Inflatable Seal no. control TypeWeight lb (kg)24G542 24G743 Ball SST 16G241 16G242 Exposed 450 (204)24F191 24G743 Ball CS** 16G241 16G242 Exposed 464 (210)24G543 24G743 Ball SST 16G241 16G242 Enclosed SST 464 (210)24F192 24G744 Ball SST 16G241 16G242 Exposed 450 (204)24F193 24G744 Ball CS** 16G241 16G242 Exposed 464 (210)24F194 24G744 Ball SST 16G241 16G242 Enclosed SST 464 (210)**CS = Painted carbon steel+For use with viscous materials