410S 4000 Brochure

Moda 410S/4000 EN 1.4000, ASTM TYPE 410S / UNS S41008 Products & dimensions Cold rolled products available dimensions in mm General characteristics Outokumpu 4000 is a ferritic chromium stainless steel  and Outokumpu 4000 is a ferritic chromium stainless steel  and common features of the ferritic steel grades are:common features of the ferritic steel grades are: l Good formability, especially at deep drawing Good formability, especially at deep drawing applications applications l Not susceptible to stress corrosion cracking Not susceptible to stress corrosion cracking l Higher heat conductivity compared to austenitics Higher heat conductivity compared to austenitics l Rather low heat expansion coefficient Rather low heat expansion coefficient l Supplied with a range of functional and aesthetic Supplied with a range of functional and aesthetic surface finishes surface finishes   Typical applications Typical applications can include mining equipment, petroleum Typical applications can include mining equipment, petroleum and petrochemical equipment, press plates and thermal process and petrochemical equipment, press plates and thermal process equipment.equipment. Coil / Strip Plate / SheetSurface finish Thickness Width Thickness Width2B2B Cold rolled, heat treated, pickled, skin passedCold rolled, heat treated, pickled, skin passed 0,300,30--4,004,00 1212--15301530 0,300,30--4,004,00 1818--153015302BB2BB 2BB Bright2BB Bright--pickledpickled 0,300,30--4,004,00 3030--15301530 0,300,30--4,004,00 350350--153015302C2C Cold rolled, heat treatedCold rolled, heat treated 0,500,50--3,003,00 3030--15301530 0,800,80--0,990,99 600600--130013002D2D Cold rolled, heat treated, pickledCold rolled, heat treated, pickled 0,300,30--4,004,00 3030--15301530 0,300,30--4,004,00 350350--153015302E2E Cold rolled, heat treated, mech. desc. pickledCold rolled, heat treated, mech. desc. pickled 0,330,33--4,004,00 1212--15301530 0,330,33--4,004,00 1818--153015302F2F 2F Cold rolled, heat treated,2F Cold rolled, heat treated, skin passed skin passed 0,330,33--3,583,58 1212--15241524 0,330,33--3,583,58 1818--152415242G2G GroundGround 0,300,30--3,003,00 3030--15001500 0,300,30--3,003,00 350350--153015302H2H Work hardenedWork hardened 0,300,30--3,003,00 3030--15301530 0,300,30--0,790,79 350350--130013002J2J Brushed or dull polishedBrushed or dull polished 0,300,30--3,003,00 3030--15001500 0,300,30--3,003,00 350350--153015302M2M PatternedPatterned 0,500,50--3,003,00 3030--150015002R2R Cold rolled, bright annealedCold rolled, bright annealed 0,050,05--3,503,50 33--15001500 0,300,30--4,004,00 350350--153015301 - Outokumpu 4000 Printed: 23 jun 2015    Continous Hot rolled products available dimensions in mm Quarto plate products available dimensions in mm Chemical composition The typical chemical composition is shown in the table below.The typical chemical composition is shown in the table below. Corrosion resistance For more information see Outokumpu Corrosion Handbook.For more information see Outokumpu Corrosion Handbook. PRE Pitting Resistant Equivalent calculated using the formula: PRE = %Cr + 3.3 x %Mo + 16 x %NPRE Pitting Resistant Equivalent calculated using the formula: PRE = %Cr + 3.3 x %Mo + 16 x %N CPT Corrosion Pitting Temperature as measured in the Avesta Cell (ASTM G 150), in a 1M NaCl solution (35,000 ppm or mg/l chloride CPT Corrosion Pitting Temperature as measured in the Avesta Cell (ASTM G 150), in a 1M NaCl solution (35,000 ppm or mg/l chloride ions).ions). CCT Critical Crevice Corrosion Temperature is the critical crevice corrosion temperature which is obtained by laboratory tests according CCT Critical Crevice Corrosion Temperature is the critical crevice corrosion temperature which is obtained by laboratory tests according to ASTM G 48 Method Fto ASTM G 48 Method F Coil / Strip Plate / SheetSurface finish Thickness Width Thickness Width1C1C 1C Hot rolled, heat treated,1C Hot rolled, heat treated, not descaled not descaled 2,002,00--8,008,00 5050--15501550 2,002,00--35,0035,00 400400--250025001D1D Hot rolled, heat treated, pickledHot rolled, heat treated, pickled 2,002,00--8,008,00 5050--15501550 2,002,00--35,0035,00 400400--250025001G1G 1G Ground1G Ground 2,002,00--3,003,00 750750--15301530 2,002,00--3,003,00 750750--153015301M1M 1M Patterned1M Patterned 2,002,00--3,003,00 750750--15301530 2,002,00--3,003,00 750750--153015301U1U 1U black hot rolled1U black hot rolled 2,002,00--8,008,00 5050--15501550 6,016,01--8,008,00 750750--15501550Coil / Strip Plate / SheetSurface finish Thickness Width Thickness Width1C1C 1C Hot rolled, heat treated,1C Hot rolled, heat treated, not descaled not descaled 2,002,00--35,0035,00 400400--250025001D1D Hot rolled, heat treated, pickledHot rolled, heat treated, pickled 2,002,00--35,0035,00 400400--25002500C Mn Cr Ni Mo N OtherTypical 0.03 12.5ASMEASME II A SA II A SA--240240 =0.080.08 =1.001.00 11.511.5--13.513.5 =0.600.60ASTM A240ASTM A240 =0.080.08 =1.001.00 11.511.5--13.513.5 =0.600.60EN 10088EN 10088--22 =0.080.08 =1.01.0 12.012.0--14.014.0Pitting corrosion resistance Crevice corrosion resistancePRE CPT CCT1313 <10<10 <0<02 - Outokumpu 4000 Printed: 23 jun 2015    Mechanical properties The mechanical properties of the available products are given in the table below.The mechanical properties of the available products are given in the table below. 1)1)Elongation according to EN standard:Elongation according to EN standard: AA8080 for thickness below 3 mm. for thickness below 3 mm. A for thickness = 3 mm.A for thickness = 3 mm. Elongation accordingElongation according to ASTM standard A to ASTM standard A22”” or Aor A5050. . Physical properties Data according to EN 10088, EN 10095 or typical values.Data according to EN 10088, EN 10095 or typical values. Fabrication Welding Outokumpu 4000 is sensitive to grain growth since less martensite is formed compared to similar grades. For this reason, low heat input Outokumpu 4000 is sensitive to grain growth since less martensite is formed compared to similar grades. For this reason, low heat input shall be used. Austenitic fillers are most common, but at service temperatures above 450shall be used. Austenitic fillers are most common, but at service temperatures above 450ººC , a nickelC , a nickel--base filler of EN ISO 6082 type is base filler of EN ISO 6082 type is advantageous. The shielding gas for MAG should be based on Ar/He, mixed with some oxygen to improve arc stability.advantageous. The shielding gas for MAG should be based on Ar/He, mixed with some oxygen to improve arc stability.   Cold rolled coil and sheetRp0.2 MPaRp1.0 MPaRm MPaElongation1) %Impact strength J Rockwell HB HVTypical (Thickness 1mm) 320 340 440ASMEASME II A SA II A SA--240240 = 205 205 = 415 415 = 183 183ASTM A240ASTM A240 = 205 205 = 415 415 = 183 183EN 10088EN 10088--22 = 240 240 = 250 250 400 400 -- 600 600 = 19 19  Hot rolled coil and sheetRp0.2 MPaRp1.0 MPaRm MPaElongation1) %Impact strength J Rockwell HB HVTypical (Thickness 4mm) 300 325 430 35 74ASMEASME II A SA II A SA--240240 = 205 205 = 415 415 = 183 183ASTM A240ASTM A240 = 205 205 = 415 415 = 183 183EN 10088EN 10088--22 = 220 220 400 400 -- 600 600 = 19 19  Hot rolled quarto plateRp0.2 MPaRp1.0 MPaRm MPaElongation1) %Impact strength J Rockwell HB HVTypical (Thickness 15mm) 270 320 490 30ASMEASME II A SA II A SA--240240 = 205 205 = 415 415 = 183 183ASTM A240ASTM A240 = 205 205 = 415 415 = 183 183EN 10088EN 10088--22 = 230 230 400 400 -- 600 600 = 19 19DensityModulus of elasticityThermal exp. at 100°CThermal conductivityThermal capacityElectrical resistance Magnetizablekg/dm3 GPa 10-6/°C W/m°C J/kg°C µOm7,77,7 220220 10,510,5 3030 460460 0,600,60 YesYes3 - Outokumpu 4000 Printed: 23 jun 2015Standards & approvals The most commonly used international product standards are given in the table below.The most commonly used international product standards are given in the table below.    Contacts & Enquiries Contact your nearest sales office www.outokumpu.com/contactswww.outokumpu.com/contacts    Standard DesignationASME SAASME SA--240M Code Sect. II. Part A240M Code Sect. II. Part A TYPE 410S / UNS S41008TYPE 410S / UNS S41008ASTM A240/A240MASTM A240/A240M TYPE 410S / UNS S41008TYPE 410S / UNS S41008EN 10088EN 10088--22 1.40001.40004 - Outokumpu 4000 Printed: 23 jun 2015Working towards forever. We work with our customers and We work with our customers and partnerspartners to create long lasting solutions to create long lasting solutions for the toolsfor the tools of modern life and the of modern life and the worldworld’’s most critical problems:s most critical problems: Clean Clean energy, clean water and efficient energy, clean water and efficient infrastructure. Because we believe in a infrastructure. Because we believe in a world that lasts forever.world that lasts forever. Information given in this brochure may be subject to alterations without notice. Care has been taken to ensure that the contents of this Information given in this brochure may be subject to alterations without notice. Care has been taken to ensure that the contents of this publication are accurate but Outokumpu and its affiliated companies do not accept responsibility for errors or for information which is publication are accurate but Outokumpu and its affiliated companies do not accept responsibility for errors or for information which is found to be misleading. Suggestions for or descriptions of the end use or application of products or methods of working are for information found to be misleading. Suggestions for or descriptions of the end use or application of products or methods of working are for information only and Outokumpu and its affiliated companies accept no liability in respect thereof. Before using products supplied or manufactured by only and Outokumpu and its affiliated companies accept no liability in respect thereof. Before using products supplied or manufactured by the company the customer should satisfy himself of their suitabilitythe company the customer should satisfy himself of their suitabilityoutokumpu.com steelfinder.outokumpu.com5 - Outokumpu 4000 Printed: 23 jun 20156 - Outokumpu 4000 Printed: 23 jun 2015