56 Series Close Coupled Gear Pumps

Albany Stanhope 56 Series PumpsAlbany Standard Pumps(a Division of The Albany Engineering Company Limited)Richter Works Tel No: +44 (0) 1274 725 351Garnett Street Fax No: +44 (0) 1274 742 467 Bradford e-mail: sales@albany-pumps.co.uk BD3 9HB Http://www.albany-pumps.co.uk Head Office: Tel No: +44 (0) 1594 842275 Albany Engineering Co. Limited Fax No: +44 (0) 1594 842574 Church Road Lydney GLOS. Gl15 5EQ ALBANY AS 56.156 Series ModelsCompact and robust gear pumps with cast iron casings, steel rotors and shafts and adjustable glands. Adjustable internal relief valves are available on all pumpsFEATURES APPLICATIONS* Self-priming Machine tools, sprayers, packaging machinery,* Constant, non-pulsating flow bottle washing, de-icing, damp proofing, timber* Operates between 100 rev/min to 1725 rev/min treatment, oil and solvent re-cycling, fuel oil* Packed adjustable gland, lip seal or mechanical systems, pressure testing, processing, de-seal greasing, general circulation, lubrication and* Choice of bearings transfer duties.* Motor drive or bare drive shaft* Electric or air motor drive for normal, extreme LIQUIDS HANDLEDor hazardous conditions* Individually tested Fuel oils, coolants, lubricants, solvents, bitumen,liquid wax, molasses, cooking oil, glue, varnish,detergents, anti-freeze, insecticides, sodiumhydroxide, paints etc.PRESSURE, FLOW & SUCTION VISCOSITY56 series gear pumps can produce pressures up 56 Series gear pumps are individually tested on oil.to 10 bar depending on available power supply (kW) The performance details shown are based on theseand liquid. Powers listed in performance tables tests at the viscosities stated. Viscosity will rise ascover relief valve pattern pumps with discharge temperature falls. Viscous liquids will cavitate atpressures up to that stated. high running speeds. Cavitation can be preventedby heating liquids to reduce viscosity, or pumpingThe rate of flow is proportional to the running speed. at low speeds, or both.Suction lift will vary according to the shaft speed,viscosity and the vapour pressure.TEMPERATURE RELIEF VALVESRunning at recommended speeds standard pumps Relief valves are pre-set to protect the motor fromcan handle liquids at temperatures from 0EC - 95EC. overload. They are not suitable for use as control Special pumps are available for liquids at extreme valves. The relief valve can be supplied fortemperatures. external relief if needed.ROTORS SEALINGAll 56 series pumps can have spur or double helical Lip seals are standard on all type F models.rotors (flowrate from a double helical rotor pump will Packed glands are standard on all type P models.be slightly lower than that from a spur rotor pump).Mechanical seals are available on type P modelsMOUNTING - for options and type references seedimension drawing. Note: Suction head & static discharge head on lipseal models must not exceed 0.34 bargSPECIAL PUMPSSome options:-Many varieties of 56 series pumps can be supplied from existing Albany designs including pumps for extremetemperatures and pressures.Heated Pumps Pumps in Gunmetal, Steel & Stainless SteelVertical Models Very compact ‘VP’ ModelsALBANY 2DimensionsMODEL TYPE ‘F’ 56 flange mounting complete with pump/motor adaptor and motor, available with: LIP SEALMODEL‘F’MTR mm BRANCHBSPfemaleWEIGHTKgA B C D E F G H J KRV NONRVRV NONRVRV NONRVRV NONRV56-2250 D90L 557 79 264 125 62 175 85 154 140 178 242 171 1.1/4" 3856-2250 D100L 609 79 282 140 72 175 85 180 160 204 242 171 1.1/4" 3856-2250 D112M 610 79 289 140 84 175 85 191 190 223 242 171 1.1/4" 4456-2250 D132M 795 79 133 114 124 175 85 214 216 285 242 171 1.1/4" 9456-3250 D90L 583 92 277 125 62 175 85 154 140 178 242 152 1.1/2" 4456-3250 D100L 835 92 295 140 72 175 85 180 160 204 242 152 1.1/2" 4456-3250 D112M 636 92 302 140 84 175 85 191 190 223 242 152 1.1/2" 4856-3250 D132M 821 92 146 114 124 175 85 214 216 285 242 152 1.1/2" 9856-4500 D112M 843 667 284 108 318 140 84 85 191 190 223 165 2.1/2" 6156-4500 D132M 1028 852 284 108 162 114 124 85 214 216 285 165 2.1/2" 11156-4500 D160L 1110 934 284 108 162 114 124 85 273 216 317 165 2.1/2" 161MODEL TYPE ‘P’ 56 pedestal mounting, available with: PACKED GLAND or MECHANICAL SEALH1:- MECHANICAL SEAL H2:- PACKED GLANDMODEL‘P’mm BRANCHBSPfemaleWEIGHTKgA B C D E F G H1 H2RV NONRVRV NONRVRV NONRV56-2250 79 187 260 171 32 102 86 121 85.5 19 25.4 1.1/4" 1756-3250 92 200 260 171 38 102 86 121 76 19 25.4 1.1/2" 2156-4500 259 108 216 171 76 124 86 82.5 19 25.4 2.1/2" 34ALBANY 3CEAHDF GCA EBHDF GMODEL TYPE ‘F’ 56 flange mounting, available with: LIP SEALMODEL‘F’mm BRANCHBSPfemaleWEIGHTKgA B C D E F G H JRV NONRVRV NONRVRV NONRVRV NONRV56-2250 267 260 203 187 98 222 172 102 178 114 25.4 1¼” 17 1356-3250 292 260 203 200 111 241 152 102 178 114 25.4 1½” 21 17MODEL‘F’mm BRANCHBSPfemaleWEIGHTKgA B C D E F G H JRV NONRVRV NONRVRV NONRVRV NONRV56-4500 497 324 203 216 127 165 102 178 114 25.4 2½” 24 20ALBANY 4Rotation & Flow TOP DRIVE ANTI- CLOCKWISE DRIVE SHAFT C/L RELIEF VALVEADJUSTER DELIVERY SUCTION SIDE SIDE DRIVE SHAFT C/L BOTTOM DRIVE CLOCKWISE TOP DRIVE ANTI-CLOCKWISE DRIVE SHAFT C/LRELIEF VALVEADJUSTER DELIVERY SUCTION SIDE SIDE DRIVE SHAFT C/L BOTTOM DRIVE CLOCKWISE TOP DRIVE CLOCKWISE DRIVE SHAFT C/L RELIEF VALVE ADJUSTER SUCTION DELIVERYSIDE SIDE DRIVE SHAFT C/L BOTTOM DRIVE ANTI-CLOCKWISE TOP DRIVE CLOCKWISE DRIVE SHAFT C/L RELIEF VALVE ADJUSTER SUCTION DELIVERY SIDE SIDE DRIVE SHAFT C/L BOTTOM DRIVE ANTI-CLOCKWISEDRIVE END VIEWS ‘F’ & ‘P’ 56-2250 & 56-3250 DRIVE END VIEWS ‘F’ & ‘P’ 56-4500Performance 960 rev/min 1420 rev/minModel Viscosityin cstCapacity in litres/min atthese pressures (bar g)kW at these pressures (bar g)Model Viscosityin cstCapacity in litres/ min atthese pressures (bar g)kW at these pressures (bar g)0 3.5 7 10 3.5 7 10 0 3.5 7 10 3.5 7 1056-22504 103 98 93 - 1.5 2.2 -56-2250DH4 154 147 140 - 3.0 4.0 -125 103 99 95 91 1.5 3.0 4.0 125 154 148 142 136 3.0 4.0 5.51250 103 100 97 94 2.2 3.0 4.0 1250 154 150 146 142 4.0 5.5 5.556-32504 148 141 - - 2.2 - -56-3250DH4 222 211 200 - 4.0 5.5 -125 148 142 136 130 3.0 4.0 5.5 125 222 213 204 195 4.0 5.5 7.51250 206 144 140 136 3.0 4.0 5.5 1250 222 216 210 204 5.5 7.5 11 56-45004 206 196 - - 2.2 - -56-4500DH4 308 294 - - 4.0 - -125 206 198 190 182 3.0 5.5 7.5 125 308 296 284 272 4.0 7.5 111250 206 200 194 188 5.5 7.5 7.5 1250 308 300 292 284 7.5 11 15Pumps for liquids with viscosities less than 4 centistokes must be referred to Albany sales for selection.Suitable for suction lift up to 3MALBANY 5