6622CPT DI Platform Machine E-Specifications

1835 Wall Street • Salina, KS 67401 | 1-800-436-7762 | geoprobe.comThis document is not a final purchasing quotation. Tooling specifications are subject to change without notice. E-SpecsGeoprobe® Model 6622CPTThis dynamic machine has a self anchoring system allowing for static push of CPT and Geoprobe® Direct Image® tooling. It also has the Geoprobe® GH62 percussion hammer system for direct push sampling applications.Static Push & Direct Push Features: • Two outboard mounted hydraulic anchor drives allowing for the installation of up to 16 inch diameter anchors • Hydraulically activated CPT chuck with wide chuck opening for larger diameter tooling • CPT vale system for controlled speed of CPT pushing • Geoprobe® GH62 Percussion Hammer System w/ side sift movementGeoprobe® Track Carrier System: • Rubber Track Carrier w/ Frame Rail System design allowing you to add optional features to the machine • Auxiliary Hydraulic ports allow for optional features such as pumps, liner extruders, and pressure washers • Rear Blade System for tooling transport and machine stability • Two front hydraulic outriggers allow for easy machine leveling • Multi-Position control panel for operator comfort & safetyOptional Features: • 2L4 Moyno Pump System • Direct Image Tooling Rack • Pressure Washer & Tool Rack System (GP50DR) • Liner Extruder SystemModel 6622CPT SpecificationsStroke ....................................................66 in. .......................1,676 mmWeight ..................................................8,720 lb. ..................... 3959 kgWidth ....................................................78 in. .......................1,981 mmTrack Width ...........................................12 in. ..........................305 mmLength (folded) .....................................135 in. .....................3,429 mmHeight (folded) .....................................88 in. ....................... 2,235mmHeight (working max) ...........................166 in. .....................4,216 mmLateral Movement (side-to-side) .......... 25 in. .........................635 mmExtension ..............................................15 in. ..........................381 mmMain (Push) Cylinders ................................. 2, 4 in. (102 mm) diameterPulling Stroke Time (high/low speed) ................. 5 sec/11 secDown Force ...........................................40,000 lb. .....................178 kNRetraction Force ....................................46,000 lb. .....................205 kNCPT Operating Pressure .........................2,500 psi ......................169 barTrack Drive Operating Pressure ..............2,850 psi ......................196 barHydraulic Flow Rate (system) ................ 40 gpm ......................151 LpmHammer System....................................................... GH62Percussion Rate ........................................................ 32 HzTorque (hammer motor) .......................560 ft. lb. ................... 759 N•MRotation Rate (hammer motor) ..................240 rpm (bi-directional)Hammer Side Shift ................................12 in. ..........................305 mmFuel Capacity (diesel) ............................17 gal ............................... 64 LEngine (diesel) ..........................Kubota, 4-cylinder turbo, liquid cooledEngine Power ........................................58 hp .............................40 KwLeveling Jacks, 2 forward, 2 rear............................ HydraulicTravel Speed ..........................................0-5 mph ......................0-8 kphSurface Load .........................................4.4lb/in2 ........................0.31 kg/cm2Anchor Drives ...............................................................2Anchor Spacing, center-to-center ......... 66 in. ........................1676 mmAnchor Drive Stroke ...............................69 in. ........................1753 mmAnchor Torque .......................................2500 ft. lb. .............. 3390 N•MAnchor Diameter (max) .........................15 in. ..........................381 mmAuxiliary Hydraulics: 3 outlets (ea) ........ 30 gpm ......................114 Lpm CPT Chuck for static push toolingOutboard Hydraulic Anchor motorSwing Arm Control Panel