AC 1400 MSDS Brochure

Washers, disinfectors and automated systemsfor animal cages, feeding bottles and fish tanksthe most comprehensive range in the marketTest reports prove the effectiveness and reliability of the washing and disinfection process.Full validation documentation including FAT-SAT-IQ-OQ-PQ and microbiological tests can be provided.Steelco washers for lifescience applications are at the forefront of knowledge and research.High efficiency and tested washing results are realised through the combination of available washing systems and patented solutions.You can find in the detail of our machines and systems the essence of ergonomy, safety, productivity, automation, high throughput, usability, reliability, traceability, allergene protection, operator safety, quality design, space - time - water - energy saving capabilities.the most comprehensive range in the marketAnimal cage washing systems, robotized solutions and integrated bedding systemsAnimal cage and fish tanks washersTrolley washers and decontamination locksFeeding bottle washing systemsFeeding bottle washersintegrated with de-capping,filling, re-capping modules Ultrasonic cleaning systemsand modulesConstant improvements and innovations lead Steelco products to run economically and reach a higher level of environment compatibility.Steelco can provide a full system planning Service to support Life Science team Managers in customizing lay-out configuration for new or restructured projects.“For the Environmentally conscious”total chamber volumeAC 1200W 765 x D 900 x H 815 mmW 30.12" x D 35.43" x H 32.09"AC 1300W 1550 x D 730 x H 815 mmW 61.02" x D 28.74" x H 32.09"AC 1400W 1550 x D 900 x H 815 mmW 61.02" x D 35.43" x H 32.09"Capacity1x18 bottles crate per cycleCapacity2x18 bottles crate per cycleCapacity 1 caps crate each tank- Independent washing/rinsing system with rotating arms on each level and on the top.- Water filtering with flush self cleaning filter.- Thermal/chemical destruction of micro organisms by rinsing at 85°C/185°F- Dosing pump for chemical product, quantity check and minimum level alarm.- RS 232 port connection for monitoring/validating.- LCD display control panel, 40 adjustable cycles.The speed and effectiveness of ultrasonic cleaning power.- Stainless steel AISI 316L washing tank, automatic tank filling, chemical dosing and water control level.- Display and timer for cycle control. Ultrasonic power control from 0 to 100%.Integrated and flexible solution for bottles and caps treatment.Independent washing and rinsing system.Full bottle coverage with individual nozzles.Integrated and flexible solution for bottles and caps treatment.washing, rinsingand filling solution.- Decapping devices.- Emptying stations also equipped with ultrasonic bath with lid for cap treatment.- Dripping stations to realize "in line" solutions- Filling modules for 2 bottle crates for MITO 2B washer.- Semi automatic recapper"in line" operation schema"back and forth" and "in line" configurations with loading table and manual de-capper.Emptying stations are available also with ultrasonic bath with lid for cap treatment.Pneumatic lift of the baskets.Under bench storage for chemicals.AC 1200 - AC 1300 - AC 1400 - washersMITO FBSwasherMITO - modulesMITO 2B - washerUC 300 - UC 400/1 - UC 400/2ultrasonic cleaning systemanimal cages - fish tanksanimal cages - fish tanks lids, components and other smallwarefeeding bottlestrolleys/palletsdedicated to- Independent washing and rinsing system.- Individual nozzles for bottle full coverage in washing and rinsing process.Pass through washing devices part of the modular MITO PT automatic system for bottle treatment.Automatically washing and rinsing up to 18 bottles in a crate each cycle. Different bottle size can be accepted.The space needed to fulfil these operations is very restricted and no further support is necessary.Single phase treatment:Automatic loading, washing and sanitizing through rinsing at 85°C.The rinsing arm on the top of the washing chamber assures the cleaning on the external surface of the bottles, the injectors placed on the bottom spry directly into the bottles for a perfect rinse. The crate is then unloaded from the clean side or collected onto a buffering conveyor.To avoid bottle contamination, a powerful air drying unit allows to dry the processed bottles in order to leave them for a longer waiting time before the sterilisation process.up to 30 crates per hourup to 10 crates per hourup to 60 crates per hourup to 60 crates per hourLoading/unloading buffering conveyorsWhen compact means complete Designed to be integrated into existing washing areas, these modular concept units are a reliable solution for the automatic de-capping or filling and recapping of animal drinking bottles. They reduce the need of personnel and avoids to the staff people the manual handling of heavy bottle crates.Re-Capper: 5 phases cycle1) caps loading2) manual or automatic conveyed bottle crates loading3) automatic bottle filling4) automatic bottle recapping5) manual or automatic conveyed bottle crates unloadingDe-Capper: removed caps are conveyed into canisters inside an easy access drawer ready for washing treatment.fully automaticsemi automaticmanualproductive or functionality upgrade with modulesproductive upgrade with robotized or automated loading - unloadingwashingthermal/chemicaldisinfectionthermodisinfectiondecontaminationultrasonic cleaninghot air dryingpass throughsafe barrierde- cappingemptyingfillingre- cappingmachine main functions operating mode available upgradesMITO PT - pass through washerwith built in drying unitDe-Capper - module Re-Capper - moduleMITO FB - washing systemMITO AC 3500 - tunnel washer- Washing chambers entirely made of stainless steel AISI 316 L.- Independent washing and rinsing systems in separated chambers with interlocked sliding doors for barrier application.- Individual nozzles for bottle full coverage in washing and rinsing chambers.from 35 up to 64 crates per hourCompact system for the semiautomatic or automatic handling of bottles and caps. Washing is the semiautomatic main function, by adding bottle crates rotating, filling and recapping stations the system can be fully automatic and integrable with robot technology for bottle crates loading and unloading.Designed to clean, sanitize and dry cages and utensils used in animal research laboratories. It assures higher throughput, effective waste separation and water and energy conservation.A special sensor into the unloading module belt stops operation in case of prolonged absence of cages.A flexible and customized solution for any application where perfect tightness and safety measures are a must.The glass is available also in red colour which prevents small animals such as mice and rats to be disturbed by normal activities of human beings.A self contained chamber minimizing particulate matter entering or exiting a controlled environment.- jets on four sides of the cabinet- side or base air suction- HEPA H14 filtration.- settable operation mode- microprocessor and LED display control panel- in line or 90° doors configurations5 phase treatment cycle: pre-wash, chemical wash, pre-rinse, final fresh hot water rinse, hot air drying systemFinal rinse water is recycled into pre-rinse and from pre-rinse into pre-wash for water and energy conservation.Extra modules can be added for customized solutions- Service access to all the machine components from one side.- HST glass windows for cycle visual inspection and easy access to the chamber interior.- An innovative washing system technology that ensure high flow rate combined with effective spray pressure offers consistently tested and efficient washing-rinsing performances.- PLC controlled with multi language touch screen control panelup to 1200 cages per hourBedding systems for animal cagesSteelco can provide a full system planning Service to support animal research laboratory team-Managers in customized lay-out configuration for new or restructured projects.Safe lock doorscontrolled environmentAir showerscontrolled environment3 washing stages example1 Loading conveyor2 Washing chamber3 Disinfection chamber at 90°C4 Drying chamber5 Unloading conveyorInterlocked doors with inflatable gasket controlAdapt for multiple decontamination methods with total integration with existing VHP generators.Designed for a high rate of cages and utensil processing in restricted space where thermodisinfection is needed. Independent chambers improve productivity and save energy consumption by processing multiple cycle simultaneously.- Short decontamination cycle time. - Chemical fogging is available into the unit.- Steelco touch screen control panel allows the setting of the cycle and the monitoring of the entire process. The system is interfaced for signal exchange with the generators.- Machine modular design from 2 up to 5 chambers depending on throughput requirements. Extra modules can be added after installation for future needs.- Fully automatic loading-unloading conveyors.- HST glass sliding doors between each chamber prevent carryover of contamination.- Validation port at each chamber.- ThermodisinfectionAC 7000 - AC 8000 - racks washerDecontamination lock - racks treatmentTW 3000 - multi chamber compartment washerwashing chamberAC 7000 4800 lt/1268.02 gal UsW 1100 x D 2076 x H 2250 mmW 43.30" x D 81.73" x H 98.43"AC 8000 4725 lt/1248.21 gal UsW 1000 x D 2250 x H 2100 mmW 39.37" x D 88.58" x H 82.67"AC 8000 6300 lt/1664.28 gal UsW 1000 x D 3000 x H 2100 mmW 39.37" x D 118.11" x H 82.67"General features- Washing chamber and filter made in s.s. AISI 316L.- Flush self-cleaning filter for the re-circulation of the wash water.- Multiple oscillating washing and rinsing pipe. Rinsing circuit is totally separated from the wash line.- WHP - Hydrogen Peroxide vapour facility.- Chemical fogging option for wet surface disinfection.- Manifold system availability for trolley docking with spray arms (AC 8000)- Data archiving system and process control.AC 8000- Single or double full-glass automatic sliding door, easy visual inspection.- Fully automatic version for loading and unloading the cage racks availableAC 7000- Stainless steel AISI 316L single or double interlocked hinged door (right or left hand) with glass inspection window.dimensionschamber volume 500 lt / 132.09 Gal Uscart volume 350 lt / 92.46 Gal Usdevoted to hygiene“For the Environmentally conscious”Pharmaceutical washing-systems“For the Environmentally conscious”devoted to hygieneLaboratory glassware> washing systemDental washer disinfectorsdevoted to hygiene“For the Environmentally conscious”Flusher disinfectors> for hospitals and nursing housesdevoted to hygiene“For the Environmentally conscious”devoted to hygieneWasher disinfectors> Small - Medium range“For the Environmentally conscious”devoted to hygiene“For the Environmentally conscious”Washer disinfectors> CSSD Range - Systems and Automations www.steelcospa.comSTEELCO ASIA6th floor, Suite 16, IOI Business ParkPersiaran Puchong Jaya Selatan - Bandar Puchong Jaya47100 Puchong, Selangor - MalaysiaPh +60 3 8064 4339 (Ext. 112) - Fax: +60 3 8064 4340e-mail: adminasia@steelcospa.comSTEELCO S.p.A.Via Balegante, 27 - 31039 Riese Pio X (TV) - ItalyPh. +39 0423 7561 - Fax +39 0423 755528e-mail: steelco@steelcospa.comwww.steelcospa.comSTEELCO HUNGARYTemesvár u., 19-211116 Budapest - HungaryPh. +36 1 371 0257Fax +36 1 371 0258e-mail: steelco@t-online.huSTEELCO USA999 Stinson Way - Unit 301West Palm Beach, FL 33411 USAPh. +1 561 791 8313Fax +1 561 791 8213e-mail: contact@steelco-usa.comBranchesHeadquarterProducts offered for sale may differ from those described or illustrated in this brochure due to later production changes or/and optional configurations. The products and technical specifications are subjected to change wihout prior notice. Please consult your Steelco dealer for the latest information.DC-PD-02-AC range EN Rev.01Flusher disinfectorsDental washer disinfectorsLaboratory glassware washer disinfectorsPharmaceutical washing systemsWasher disinfectorsSmall/Medium RangeWasher disinfectorsCSSD Range - Systems and Automations