AccuFoamer - Laboratory Bitumen Foaming System Brochure

AccuFoamer 919.875.8371 (t)919.875.8328 (f)sales@instrotek.com™Laboratory Foaming DeviceThe new AccuFoamer from D&H Equipment, Ltd. is ideal for repeat-able batching of foamed asphalt samples in the laboratory. Accu-Foamer is designed to fit on a laboratory counter top and can easily be used to check the proper ratio of bitumen to additive used in Warm Mix Asphalt (WMA) for variety of different conditions. The unit includes pressurized reservoirs for bitumen and liquid additives (water or other chemicals) and can accurately batch 150 to 6800 grams through the mixing chamber.Features:• Bitumen chamber heated accurately up to 200° C (390° F) • Can heat additive to 82° C (180° F) • Separate pressurized reservoirs for bitumen and additives •150 to 6800 grams of bitumen can be batched through the mixing chamber• Accurate and repeatable adjustment of liquid additives from 0 to 9%• Bitumen and additive volumes controlled by air pressure• Burner spray nozzles available in different sizes and can easily be replaced• Includes timer function to control batch size and product use• Expels foamed mixture into sample container or directly into mixing bucket• Includes operation video and software for calibrating the flow ratesCompressed Air 75 psi minimum Power Requirement 220 Volt, single phase, 30 Amp circuitBatch Size 150 to 6800 gramsLiquid Additive Dosage 0 to 9%Bitumen Chamber Temp. 200° C (390° F) Additive Chamber Temp. 82° C (180° F)Size 30” (w) x 20” (l) x 25” (h) 76.2 cm x 50.8 cm x 63.5 cm Weight 180 lbs (81.6 kg)Shipping weight 200 lbs (90.7 kg)Specifications:5908 Triangle Dr. Raleigh, NC 27617 www.instrotek.com