Acid Gases Instruction Sheet

Acid Gases Tube Instructions Shelf life: This tube has a shelf life of 12 weeks. Tubes must be exposed and returned for analysis within this period. Tube storage: Tubes should be refrigerated before exposure. Do not exceed the shelf life. If using a blank tube, do not remove the tube from the screw top container. Store in the same conditions as the sampling tubes. Fixing tubes: It is important that the end of the tube is in an area with a free circulat ion of air. Certain surfaces may act as absorbers leading to reduced atmospheric concentrations immediately adjacent to the tube. For this reason tubes should not be mounted directly onto a surface. Ideally a spacer of at least 5cm should be used between the surface and the tube. The spacer should not be placed in any form of recess (to avoid the possibility of sampling stagnant air). To avoid sampling in an area of h igher than usual turbulence, tubes should not be located on the corner of a building. Exposure: 1. Remove tube from screw top container. Keep container in a safe place. 2. Position tube vertically with the cap containing the filter facing downwards during required sampling period (2-4 weeks). 3. Label the tube and the exposure sheet clearly with the supplied barcode labels (see below). After sampling put the tube back into the screw top container. Returning tubes: Tubes should be returned as soon as possible after exposure. Fill in exposure sheet including exposure time and the compounds required for analysis. Tubes should be returned in a sealed container, such as the plastic bag that they are received in. Return address: Ormantine USA, 1740 Convair St reet, Palm Bay, FL, 32909. Tel: +1 (321) 676 7003 Email : diffusion@ormenviro.com