ADVANTAGE - Load Points-LPRC Brochure

? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?The Hardy Instruments HI LPRC and HI LPRB ADVANTAGE™ Series,rocker load point systems are designed for use on high capacity vessels.Each load point consists of galvanized steel mounting hardware and a stainlesssteel mV/V & mV/V/ohm matched load sensor with true hermetic sealing,C2® Second Generation Calibration capabilities, on-board electronic certs,a ¼ NPT conduit adapter and thirty feet of cable. Each rocker low profileload point system provides built-in checking, lift off protection and isspecifically designed to eliminate the effects of unwanted forces to provideexceptional accuracy. A grounding strap and fixed color code wiring label areprovided with each load point. The load sensors have an IP rating of IP68and are NTEP Class III.The HI LPRC is available in the following standard capacities: 66K lbs and110K lbs, while the HI LPRB is available in 132K lbs and 200K lbs. Theyboth replace the Hardy HI LPD series load point line.SPECIFICATIONSRated Output (F.S.) 2 ±0.002 mV/VNon-Linearity ± 0.012 %R.O.Hysteresis < ±0.025 %R.O.Zero balance < ± 1.0 % R.O.Creep @ 5 Min. < ± 0.01 % R.O.Temp Effect Output < ± 0.0014 % R.O/C.Temp Effect Sensitivity < ± 0.0010 % R.O/C.Input Resistance 1106 ± 21 ohm (RCH03)400 ± 20 ohm (RCH01)Output Resistance 1000 ± 1 ohm (RCH03)351 ± 1 ohm (RCH01)Insulation Resistance>5000 MohmExcitation 5 - 15 vdcSafe Load Limit 200 % EmaxUltimate Load 300 % EmaxORDERING INFORMATIONLoad Point with galvanized Hardware (-45) shown,Optional stainless Hardware (-43_)Capacity Model # Model #lbs. mt. Fixed Assy Spare Load Sensor66K 30 HI LPRC66K-45C HI RCH03-66K110K 50 HI LPRC110K-45C HI RCH03-110K132K 60 HI LPRB132K-45C HI RCH01-132K200K 90 HI LPRB200K-45C HI RCH01-200KLoad points can be ordered as a system rather than ordering individual components.Three Leg Systems Four Leg SystemsTotal Capacity Total CapacityModel # lbs. mt. Model # lbs. mt.HI 3R198K-45 198K 90 HI 4R264K-45 264K 120HI 3R330K-45 330K 150 HI 4R440K-45 440K 200HI 3R396K-45 396K 180 HI 4R528K-45 528K 240HI 3R600K-45 600K 270 HI 4R800K-45 800K 360Hermetic Load Point Assembly Compression ADVANTAGE™ LINE H I G H R A N G E1 metric ton (mt) = 1,000kg? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? www.hardyinst.com 1114 www.hardyinst.comAll information and drawings on these pages subject to change without notice • Consult website for latest specifications.The Hardy Instruments HI HLPS ADVANTAGE™ Series, sliding load pointsystem is designed for use on medium to high capacity vessels.Each load point consists of mounting hardware and a stainless steel mV/VandmV/V/ohm matched load sensor with true hermetic sealing, C2® SecondGeneration Calibration capabilities, on-board electronic certs, a ¼ NPT conduitadapter and twenty feet of cable. Each pre-assembled, low profile load pointsystem provides lift off protection and consists of three mount types specificallydesigned to eliminate the effects of unwanted forces to provide exceptionalaccuracy. The assembly can be positioned 360 degrees in ninety degree steps. Agrounding strap and fixed color code wiring label is provided with each load point.The mounting hardware is available in either stainless or galvanized steel. Thesensors have an IP rating of IP68 and are NTEP Class III.The HI HLP is available in the following standard capacities: 1,125 lbs, 2.25K lbs,4.5K lbs, 11.25K lbs, 22.5K lbs and are replacements for Hardy’s HI LPS and lowcapacity LPD load point line.SPECIFICATIONSRated Output (F.S.) 2 ±0.002mv/vNon-Linearity < ± 0.018 %R.O.Hysteresis < ± 0.025 % R.O.Zero Balance < ± 1.0 % R.O.Creep @ 5 Min. < ± 0.010 % R.O.Temp Effect Output < ± 0.0012 % R.O/C.Temp Effect Sensitivity < ± 0.0010 %/C.Input Resistance 1106 ± 5 ohmOutput Resistance 1000 ± 1 ohmInsulation Resistance >5000 MohmExcitation 5 - 15 vdcSafe Load Limit 200 % EmaxUltimate Load 300 % EmaxSafe Side Load 100 % EmaxORDERING INFORMATIONLoad Point with Stainless Hardware (-43_) shown, Galvanized Hardware (-45_)A vessel with 3 legs will require 1 each fixed (F), bumper (B) & slider (S) assy.A vessel with 4 legs will require 1 each fixed (F), bumper (B) & 2 each slider (S) assy.Capacity Model # Model # Model # Model #lbs mt Fixed Assy Bumper Assy Slider Assy Spare Load Sensor1,125 0.5 HI HLPS1125-43F HI HLPS1125-43B HI HLPS1125-43S HI SBH04-11252.25K 1 HI HLPS2.25K-43F HI HLPS2.25K-43B HI HLPS2.25K-43S HI SBH04-2.25K4.5K 2 HI HLPS4.5K-43F HI HLPS4.5K-43B HI HLPS4.5-43S HI SBH04-4.5K11.25K 5 HI HLPS11.25K-43F HI HLPS11.25K-43B HI HLPS11.25K-43S HI SBH04-11.25K22.5K 10 HI HLPS22.5K-43F HI HLPS22.5K-43B HI HLPS22.5K-43S HI SBH04-22.5KLoad points can be ordered as a system rather than ordering individual components.Hermetic Load Point Assembly Compression ADVANTAGE™ LINE? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?All information and drawings on these pages subject to change without notice • Consult website for latest specifications.M E D I U M R A N G E1 metric ton (mt) = 1,000kgThree Leg Systems Four Leg Systems Total Capacity Total CapacityModel # lbs mt Model # lbs mtHI 3S3375-43 3.375 K 1.5 HI 4S4.5K-43 4.5 K 2.0HI 3S6.75K-43 6.75 K 3.1 HI 4S9K-43 9 K 4.1HI 3S13.5K-43 13.5 K 6.1 HI 4S18K-43 18 K 8.2HI 3S33.75K-43 33.75 K 15.3 HI 4S45K-43 45 K 20.4HI 3S67.5K-43 67.5 K 30.6 HI 4S90K-43 90 K 40.8? ? ? ? ? www.hardyinst.com 1510 www.hardyinst.com