Alarm-Unit-CWE 67

CANline Alarm-Unit with built-on flash light Type CWE 67 Application The KIMESSA CWE 67 is a unique BUS compatible audio visual alarm designed for use with the addressable CANline gas monitoring solution. The flash light could be delivered in different colours, e.g. orange for explosive gases or blue for toxic gases. The housing consists of powder-coated steel. The flash light is constructed for mounting inside of buildings. • An unlimited number may be integrated with addressable gas detectors on the addressable gas monitoring network • Incorporates a programmable relay • Individual programming options for the sounder, beacon and relay: - automatic reset, manual reset oder manual override reset - time delay for automatic stop of the horn programmable (1 – 999 sec.) - on and off delay for lamp and relay individual programmable (1 – 999 sec.) • Simple programming of the sounder beacon can allocate one or more gas detectors by alarm level (and or technical fault) • Status LED indicators on CWE 67 (Red – fault. Green – data ok) Data and design subject to change without notice CWE67 V240210 Specification Supply: 4x1mm2, shielded Supply Voltage: 16.5...30 Volt DC Power consumption: 130...180 mA Output for Alarm light: 24 VDC or 10 VDC Output for Horn: 24 VDC Operating temperature: -20 °C ... +80 °C Dimensions L 150 W 100 x H 85 mm Weight 820 gr. Electronic CWE Optional Accessories 2 BUS-Connectors RS232-programming interface (on reverse) Terminals for: - Alarm light (24 or 10 VDC) - Horn (24 VDC) - Relay output LW 46/ 10 VDC alarm LED (red) display sign – illuminates in gas alarm mode for CWE, Dimensions: 460 x 140 mm (l x w) LW 60/ 10 VDC alarm LED (red) display sign – illuminates in gas alarm mode Dimensions: 600 x 165 mm (l x w) Text selectable at time of ordering Piezo-sound generator (85 db)