AMBF - H & HN Series - High Efficiency Pleated Cartridges - Brochure

High Efficiency Pleated CartridgesH & HN Series in 2 efficiency grades, offer the ultimate in high-end filtrationProudly Made in aMerica• AMBF offers the highest grade, 90% and 99.98% efficient elements on the market today• Our media is manufactured in-house under strict guidelines to ensure consistency• In-house lamination and calendaring of our medias allow us to control the final media grades• Complete in-house testing with a Capillary Flow Porometer guarantees a superior and consistent product• With 8 micron ratings and multiple lengths to ensure we produce the element you require• Elements have thermally bonded end caps and ultrasonic welded media seams for a one piece construction• Final, one piece construction up to 40” long ensures zero bypass• We install the maximum amount of media in each filter without pleat binding for increased dirt loading capacity• Elements are 100% polypropylene—media, inner and outer supports and end caps• Elements meet FDA Title 21 regulations for food and water contact• Cartridges are constructed in a clean room environment• Cartridges may be ordered as final rinsed with 18 mega ohm waterPlease call with all of your applications(219) 866-35001030 E. Elm Street Rensselaer, IN 47978PH (219) 866-3500 FAX (219) 866-3570Visit AMBF’s website for all of your filtration needswww.AmericanMeltBlown.com©2012 American Melt Blown & Filtration Viton and Teflon are registered trademarks of DuPont Dow Elastomers L.L.C. & the DuPont CompanyMaterials of Construction Dimensions (nominal)Filter Media: Polypropylene Melt Blown Outside Diameter: 2.7"Hard Outer Cage: Polypropylene Lengths: 10", 20", 30" & 40"Netted Outer Cage: Polypropylene Lengths: 9.75", 10", 19.5", 20", 29.25", 30", 39" & 40"Support Material: PolypropyleneSealing: Thermal BondGaskets/O-Rings: Buna N, Viton®, Teflon®, Silicone, Neoprene & EDPMSurface Area Performance SpecificationsUp to 5.5ft² (.23m²) of Effective Filtration Area per 10” equivalent, dependent upon micron ratingRetention Ratings of 90% and 99.98% at:.2, .45, 1, 3, 5, 10, 25, & 50 micronOperating Conditions FDA Listed MaterialsMaximum Differential Pressure:35 psid @ 120°F (49°C)Manufactured from materials which are FDA listed for food contact applications in Title 21 of the U.S. code of federal regulationsToxicity PurityAMBF’s Cartridges are manufactured with no additives or other manufacturing agents. We guarantee all materials used in the production meet FDA Title 21 of the Code of Federal Regulations 174.5 and 177.1520.Cartridges are Free of Surfactants, Resins, Binders and AdhesivesSterilizationMultiple Autoclaving for 30 Minutes at 250°F (121°C) under no End Load Conditions. In-line Steam Sterilization is not recommended. May be In-line Sanitized with Hot Water at 180°F (82°C) for 1 hour.222, 226, Flat Gasket, Spring, FinBuilding a Part NumberHIGH EFF.PLEATED CARTRIDGE MEDIA EFFICIENCY MICRONCARTRIDGE LENGTH END CAPGASKET / O-RING18 MEGA OHM RINSEH E A 1 5 3 B RH = Hard CageNH = Netted CageE = Polypropylene A = 90%B = 99.98%.2.451351025502 = 9.75 (2)3 = 104 = 19.5 (2)5 = 206 = 29.25 (2)7 = 308 = 39 (2)9 = 401= DOE/Plastisol (2)2 = 222/Fin3 = 222/Spring4 = 222/Flat5 = 226/Flat (1)6 = 226/Fin (1)7 = 226/Spring (1)8 = SOE/Spring9 = Flat GasketA = CustomB = BunaV = Viton®T = Teflon®S = SiliconeN = NeopreneD = EPDMR(1) Available in Hard Cage Only (2) Available in Netted Cage OnlyAMBF-HE-6/12Available End Caps