Analytical Laboratory Services Brochure

www.enthalpy.com 919.850.43922202 Ellis Road, Durham, NC 27703Air Quality LaboratoryEnthalpy Analytical Inc. Services Chemical Measurement DivisionSmall project? Please call for a quotation.Ask About Discounts For Large Projects Method Parameter Onsite Test MethodsEPA Methods 15 or 16 Sulfur emissions by GC (refineries or pulp and paper) EPA Method 18 VOC by GC - (extractive or onsite Tedlar® bags) EPA Methods 318, 320 and 321 Direct Interface FTIRHPLC Analysis EPA M26/26A, CTM-027 EPA M26/26A, CTM-027 HCl, NH4 by HPLC EPA Test MethodsEPA Method 5 Particulate matter - (filter + rinse) EPA Method 5 Filter tare EPA Method 6 Sulfur dioxide (SO2) EPA Method 8 Sulfuric acid mist (H2SO4), sulfur trioxide (SO3) EPA Method 13B-type Total fluoride by ISE, without distillation EPA Method 14A-type Total fluoride by ISE, without distillation ,EPA Method 15-type Hydrogen sulfide, carbonyl sulfide, carbon disulfide EPA Method 16-type Hydrogen sulfide, methyl mercaptan, dimethyl sulfide, dimethyl disulfide EPA Method 17 In-stack particulate matter (filter + rinse) EPA Method 18 VOC by GC - (Tedlar® bags, condensates, tubes) EPA Method 18 Methane and ethane - (Tedlar® bags) EPA Method 18-type Total hydrocarbons EPA Method 18-type Total hydrocarbons less methane and ethane EPA Method 18-type C1 - C6 - (hydrocarbons) EPA Method 24 Surface coatings (total volatiles, % H20, % solids & density) EPA Method 25D VOC of waste samples EPA Method 26/26A Hydrogen halides & halogens (HCl, HF, HBr, Cl2, Br2)EPA Method 26-type Anion scan (F, Cl, NO2, NO3, Br, PO4, SO4) EPA Method 26-type Anions EPA Method 106 Vinyl chloride EPA Method 201 PM10 EPA Method 201A PM10 (filter & 2 rinses) EPA Method 202 Condensible particulate matter EPA Method 202 Correction analysis SO4, NH4, NO4, Cl, F EPA Method 204F VOC’s in liquid input stream (distillation) EPA Method 305 Potential VOC in waste EPA Method 308 Methanol EPA Method 316 Formaldehyde EPA Method 323 Formaldehyde Enthalpy Analytical Inc. Services Method Parameter Other Test Methods (OTM)OTM-11 Presurvey for corn wet milling facilities OTM-27 PM10 and PM2.5 OTM-28 Dry impinger method for condensable particulate matterConditional Test Methods (CTM) CTM-008 Acrylonitrite CTM-027 Ammonia CTM-027-type Cation Scan (Li, Na, NH4, K, Mg, Ca) CTM-027-type Cations CTM-031 Screening for MDI CTM-032 Phenol & cresols CTM-032 Phenol & cresols, filter by GC/MS CTM-033 Hydrogen cyanide, electrochemical detector CTM-036 Isocyanates: 2,4-TDI, 2,6-TDI, 4,4-MDI ASTM MethodsASTM D1946-90 Fixed gases (H2, CO, O2, N2, CH4, CO2) ASTM D1946-90 Fixed gases (one compound) ASTM D6348-03 Gaseous compounds by FTIR NCASI Methods NCASI Method 94.02 Methanol, acetone, acetaldehyde, methyl ethyl ketone NCASI Method 94.03 Methanol NCASI Method 98.01 Chilled impinger method NCASI Method 99.02 Wood Products HAPs NCASI Method 99.02 Polar Organics (condensate) NCASI Method 99.02 Formaldehyde (condensate) NCASI Method 99.02 Polar Organics (canister) NCASI Method 99.02 Terpenes (canister) NCASI Method ISS/FP-A105.01 Aldehydes NCASI Method ISS/FP-A105.01 Methanol and phenol NIOSH, State and Specialized Test MethodsNIOSH Method 7903 Inorganic acids NIOSH Method 7904 Cyanide BTU C1-C6, fixed gases, & processing CARB Method 430 Aldehydes & ketones NJATM 1 Filterable particulate (includes Teflon® Baggie) FTIR Evaluation of material off-gassing during curing 2 Method Parameter SW-846 MethodsSW-846 Method 0010/8270C Semivolatile organics (call for M8270 list) SW-846 Method 8270 Semivolatile organics, plus semivolatile SW-846 Method 0011 Formaldehyde SW-846 Method 0011 Formaldehyde/acetaldehyde SW-846 Method 0011 Scan of 15 aldehyde/ketones (call for list)SW-846 Method 8315A Carbonyl compounds by HPLC Toxic Organics Methods (TO)TO-5 Aldehydes & ketones TO-6 Phosgene TO-8 Phenol and cresols TO-11 Formaldehyde TO-13 PAHs TO-13A PAHs TO-15 VOCs (Call for our standard target list) TO-15 + Top 10 TICs TO-15 list plus compound identification TO-15-type Compound identification (Top 10 TICs) Unusual Test MethodsEPA Proposed Method 207 Isocyanates: 2,4-TDI, 2,6-TDI, 4,4-MDI EPA Method 311 HAPs in paints & coatings EPA Method 315 MeCl2 extractable organic matter EPA Method 315 PM & MCEM from aluminum production facilities ASTM D1979-97 Formaldehyde ASTM D3792-79 Percent water - (Karl Fischer titration) ASTM D6735-01 HCl & HF / chlorides & fluorides NCASI Method RSC-02.01 Reduced sulfur compounds by direct injection GC/FPD Perfluorocarbons (PFCs) by LC/MS/MS Perfluoroctanoic acid (PFOA) & other perfluorocarbons in biological or environmental samples3Enthalpy Analytical Inc. Services Item Description Media, Canisters, Sample Reagent and EquipmentTube - Washed silica gel Tube (7mm x 110mm) Tubes Tube - Anasorb 747 (10 mm x 110mm) 2-stage 800mg/200mg Tubes Tube - Charcoal (10 mm x 110mm) 2-stage 800mg/200mg Tubes Tube - Silica gel (10 mm x 110mm) 2-stage 1040/260mg Tubes Tube - XAD-2 (8mm x 110mm) 2-stage 400/200mg Tubes Tube - XAD-4 (7mm x 70mm) 2-stage 80/40mg Tubes Tube - XAD-7 (6mm x 70mm) 2-stage 80/40mg Tubes SUMMA tank rental 1.4L & 6L tanks Flow controller Standard orifice w/o gauge Flow controller w/gauge Standard orifice w/gauge (flare setup) Canister sampler Ambient air controller with gauge Fuel gas bombs Rental Tedlar® bags 10 liters Bags EPA Method 18 - sampling system rental Rental DNPH reagent 2,4-Dinitrophenylhydrazine EPA Proposed Method 207 reagent 1-(2-pyridyl)piperazine/toluene CTM-031 & -036 rinse Acetonitrile/DMSO CTM-031 & -036 filters 1,2PP treated filters CTM-033 reagent Pb acetate or NaOH (Includes blank check by ISE) NCASI Method ISS/FP-A105.01 reagent o-benzylhydroxylamine (BHA) SW-846 Method 0010 XAD-2 (Client provides glass trap) TO-13A PUF media preparation (Client provides sleeve) Turnaround Schedule Standard turnaround time (TAT) 10 business days Standard rate for most methods, exceptions: 15 days for Methods 25D & 305Turnaround time (TAT) - 5 business days 1.75 X multiplier - usually available, exceptions for certain methods Turnaround time (TAT) - 2 business days 2 X (call for availability), exceptions for certain methods Turnaround time (TAT) - 1 business days 3 X (call for availability), exceptions for certain methods Weekend analysis (including spiked bag analysis) Call for delivery instructionsOrder Minimums and Shipping Information (3 sample or $300/analytical method minimum applies to most projects) Shipping is additional on all spike, reagent and equipment rental requests. Dangerous goods shipping charges may apply. Enthalpy is pleased to ship using customer Federal Express accounts. This avoids the 15% surcharge applied to all shipments on Enthalpy’s account. Saturday delivery - Call for instructions.Air-Quality Laboratorywww.enthalpy.com 919.850.4392 2202 Ellis Road, Durham, NC 27703Bryan Tyler (ext. 250)bryan.tyler@enthalpy.comJordan Laster (ext. 300)jordan.laster@enthalpy.comFor more information, contact:Fax: 919-850-9012V.8-09Enthalpy Analytical Inc. Services 4