Surface Water

We have a wide range of water testing equipment that is used to record trends across different water quality parameters in water bodies such as streams, lakes and rivers, as well as in seawater. Understanding these trends means that when there is a change it could be an early warning that there is a pollutant in the water or there has been a change in the aquatic ecosystem. Early detection is necessary to put mitigating measures in place.

Our parameters are wide ranging, although the most commonly measured in surface water testing and monitoring are dissolved oxygen, pH, electrical conductivity and temperature, which are standard on most Aquaprobes. If you require specific parameters to be tested, there is the option to add additional parameters.

Portable

For the ultimate in portable multiparameter water quality testing, look no further than our AP-2000, which measures all the essential parameters in a handheld device. The AP-2000 can be used in conjunction with our GPS Aquameter that records the exact location of each data set so that once back in the lab you can view all your locations on Google Maps. If you need to measure a larger number of parameters, the AP-5000 offers four auxiliary ports, two more than the AP-2000, and also measures depth. The AP-5000 is still portable and has many applications with a diameter of only 55mm.

Fixed monitoring

Both the AP-2000 and AP-5000 are suitable for short to medium term unmanned monitoring. The probes are connected to our AquaLogger, which has the capacity to capture data to months on end. If you require long term water quality monitoring, the AP-7000 is specifically designed for this: it even cleans itself. The AP-7000 is used with the larger capacity AquaLogger and with a telemetry system that sends the data directly to your desk.

AquaLogger-2000 Manual Rev D - Instruction Manual