Aquobex Floodguard - Screw-In Barriers - Manual

The installation will have taken account of what material the product is affixed to and be appropriately configured. Using the barrier as a template, mark the drill positions in the centres of the elongated slots and drill out to accommodate the anchors and resin so 10mm more than the length of the anchor, and ensuring the drill is kept straight. Clean the hole by air and apply resin inside the clean hole, clearing any excess observing all safety precautions provided by the resin manufacturer. Ensure that the anchor sleeve edge is flush with the face of the wall. Once the resin has cured, the barrier can be deployed or removed by threading the screws using the star-handled screw in the following sequence.