ATM ArnoBreak - C & R Breake Brochure

Cast Iron Breaker Cast iron breakers can be delivered in two different sizes for the efficient processing of gear housings, engine blocks and other cast iron scrap. The ArnoBreak C 400 is used mainly for light scrap. The shear movement of the serrated brea-king arm generates high breaking power producing optimal part sizes for smelting.Unlike cutting processes, the breaking process works with no tool wear.Raw material recyclingA regular part size is very important for the feeding and smelting process of cast iron parts. Cast iron breakers can achieve this optimally.ApplicationsDue to their specific application, cast iron breakers are mainly used in foundries or large scrap yards.Breakable materialsBrittle cast iron parts such as gear housings or engine blocks, moulds, cast iron pipes etc.Auxiliary equipmentRemote control, air conditioned cab, loading rig, power unit and conveying systems can be offered as auxiliary equipment.technical data ArnoRail 125 S 125 MBreaking force kN 1,250 1,250Notching / suppression force kN 1,250 1,250Break length min. mm 300 300Break length max. mm 1,000 1,000Rail capacity t/h <10 <9Cycle time s >7 >7Driving power kW 22 22Driving power increased kW 30 30Arrangement surface m x m 2.5x15.0 2.5x15.0 [ft.] [8x49] [8x49]ApplicationsRails are cut up immediately after disassembly (mobile ArnoBreak) in order to avoid the need for special transport. Alternatively, the stationary rail breaker also offers a feeding maga-zine, which reduces personnel costs.Breakable materialsBrittle railway rails with the highest possible alloy proportion. Soft tram rails, however, are not breakable.Raw material recovery Railway rails represent high-value scrap for foundries.Auxiliary equipmentRemote control, air-con. cab, loading rig, power unit and rail magazine (for stationary rail breakers). In the case of the mobile rail breaker, the remote control, loading rig and power unit are already fitted on an extendable trailer.Rail Breaker The ArnoBreak R rail breaker was deve-loped to process railway rails effectively and can be delivered in two variants. The stationary design permits the processing of rails of up to 120 m in length. A maga-zine is used for feeding the rails into the breaker.There is a mobile version for use directly on the track, which is fitted with a diesel power unit and loading rig. It can efficiently break rails of around 24 m in length into short sections measuring 300 to 1000 mm.The mobile rail breaker, which is fitted on an extendable semi-trailer, can be moved to a different location very quickly.A special notching and breaking process ensures that the rails are broken with minimum tool wear.technical data ArnoCast 120/400 200/600Breaking force min. kN 1,200 2,000Breaking force max. kN 4,000 6,000Part length max. mm 2,000 3,000Part size ejection max. mm <300 <300 [in.] [<12] [<12] Capacity cast iron t/h 10 16Cycle time s 60 60Driving power standard kW 22 44Driving power increased kW 30 60Arrangement surface m x m 5.3x2,5 7.1x3,3 [ft.] [17x8] [23x11]