ATM ArnoBrik - Series - Briquetting Presses Brochure

technical data ArnoBrik 5 7 10 12 15 18 22Briquette diameter mm 50 70 105 125 140 180 210 [in.] [2] [2.8] [4] [4.9] [5.5] [7.1] [8.7]Briquette diameter max. mm 70 90 120 135 150 195 250 [in.] [2.8] [3.5] [4.7] [5.3] [5.9] [7.7] [9.3]Power Main cylinder kN 760 1,400 2,900 4,000 5,200 8,500 12,500Briquette density steel, cast iron kg/dm3 <5.5 <5.5 <5.5 <5.5 <5.5 <5.5 <5.5Briquette density aluminium kg/dm3 <2.4 <2.4 <2.4 <2.4 <2.4 <2.4 <2.4Briquette density brass, copper kg/dm3 <7.0 <7.0 <7.0 <7.0 <7,0 <7.0 <7.0Capacity steel, cast iron t/h <0.3 <0.5 <1.5 <2.5 <4.5 <7.5 <12.0Capacity aluminium t/h <0.15 <0.25 <0.6 <1.1 <2.2 <3.5 <5.0Capacity brass, copper t/h <0.4 <0.6 <2.0 <3.0 <6.0 <8.0 <14.0Cycle time standard performance s 10 10 10 10 10 10 10Driving power standard kW 15 22 60 90 120 180 240Driving power increased kW - 30 - - - - -Arrangement surface m x m 3.0x2.0 3.5x1.8 4.3x3.6 4.5x5.0 5.0x8.0 6.5x8.5 7.0x9.0 [ft.] [10x7] [12x6] [14x12] [15x16] [16x26] [21x28][23x30]Briquetting PressThe ArnoBrik Series Briquetting Presses are offered with three different filling variants, according to the free flowing pro-perty of the material. An inclined feeder or a two-step feeder permit these presses to process both grinding slurry and drilling swarf.The solid welded construction design with two or three columns means that the machines can also be used for hea-vy continuous operation. Each machine can be operated manually or automati-cally.All presses have a graphic operator panel with visualisation of all process sequences and can therefore be integ-rated easily into fully automated pro-duction lines. Remote maintenance and system adjustments can, of course, also be carried out.Transport and storage savingsIn contrast to loose swarf, briquettes of-fer huge cost savings. Because briquet-tes emit virtually no fluids, simpler and smaller deposit sites can be used.Raw material recyclingThe compressed briquettes can be smelted more easily and safely than loose swarf.Lubricant recyclingThe most profitable aspect of briquette-forming. The process of briquette-for-ming extrudes up to 99% of the oil and water content. Lubricant oils that are squeezed out can be used again. This means that an investment in the ATM Briquetting Press ArnoBrik 7 is amor-tised within months.ArnoBrik 2 Columns 3 ColumnsCompressible materialsSteel, cast iron, stainless steel, alumini-um, magnesium, brass, copper, bronze, titanium, special alloys in powder form, slag compounds, battery waste and grinding slurry from a wide variety of materials, as well as tyre wires and mill scales. Also the mixed briquette-forming of diverse materials.Auxiliary equipmentDepending on arrangement and use, bunker systems and screw conveyors, dosing systems or weighing systems can also be supplied.max. 6% oil residue with ATM grinding slurry briquettes