AWWA - Model 10-CF - Adapters - Brochure

MATERIAL SPECIFICATIONS Fitting: Ductile iron conforming to ASTM A-536, Grade 65-45-12. Ductile iron conforming to ASTM A-395, grade 65-45-15 is available upon special request.Fitting Coating: (specify choice*) • Standard on request:• Non-coated• Alkyd-phenol primer• Bituminous coating • Optional:• Coal tar epoxy coating• Cement/mortar lining – Type II• Glass Lining• Other linings available. Contact Victaulic.* Coatings are applied per manufacturer’s recommended mils.AWWA FITTINGSVictaulic fittings for AWWA size pipe are supplied with rigid radius grooves in accordance with ANSI/AWWA C-606. Fittings conform to ANSI A21.10/AWWA C-110 for center-to-end dimensions and AWWA C-153 or ANSI A21.10/AWWA C-110 for wall thickness.While most requirements are specified “black” or non-coated, fittings can be supplied with an alkyd-phenolic primer, or bituminous coating. Coal tar epoxy and other coatings are also available. The standard black asphalt coating used on our cement lined AWWA size fittings is NSF 61 Listed. Cast surfaces will be provided with surface equivalent to SSPC-SP6 prior to coating unless specified otherwise. Fittings are available with flanged ends wherever grooved ends are shown.Linings include cement/mortar Type 2 (standard) and others. Fittings can readily be prepared for glass lining by others.Fittings are rated for working pressures to 350 psi/2400 kPa (ductile iron) in 3 – 12"/80 – 300 mm sizes and to 250 psi/1725 kPa (gray iron) in sizes 3 – 12"/ 80 – 300 mm, and to 250 psi/1725 kPa (ductile iron), or 150 psi/1035 kPa (gray iron) for 14"/350 mm and larger. Victaulic fittings shown have an end-to-end dimension tolerance of ±1/8" in all sizes and styles.CAST FITTINGS – TAPPEDVictaulic can supply tapped fittings on order to ANSI B16.1 dimension locations. Specify fitting size, tap location by letter on order.BASE FITTINGSGrooved end base 90° elbows and base tees are available with dimensions to ANSI B16.1.23.05_1Ductile Iron AWWA (Cast) Fittings23.05AWWA DUCTILE IRON PIPE – GROOVED FITTINGSJOB/OWNER CONTRACTOR ENGINEERSystem No. __________________________ Submitted By ________________________ Spec Sect ____________ Para __________Location ____________________________ Date ________________________________ Approved ___________________________Date ________________________________www.victaulic.comVICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2007 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA.REV_IDIMENSIONSC to ENO. 100-CCto EC to ENO. 10-CC to ENO. 11-CC to ENO. 12-CC to ENO. 13-CSizeNo. 100-C90º Long Radius ElbowNo. 10-C90º ElbowNo. 11-C45° ElbowNo. 12-C22½° ElbowNo. 13-C11¼° ElbowNominalSizeInches/mmActualOutside Dia.InchesmmC to EInches mmApprox. Weight Each LbskgC to EInches mmApprox. Weight Each Lbs.kgC to EInches mmApprox. Weight Each Lbs.kgC to EInches mmApprox. Weight Each Lbs.kgC to EInches mmApprox. Weight Each Lbs.kg3 3.960 7.75 19.3 5.50 8.6 3.00 5.8 3.00 12.5 3.00 9.080 100.6 197 8.8 140 3.9 76 2.6 76 5.7 76 4.14 4.800 9.00 28.0 6.50 12.0 4.00 8.4 4.00 11.5 4.00 11.5100 121.9 229 12.7 165 5.4 102 3.8 102 5.2 102 5.26 6.900 11.50 55.0 8.00 22.0 5.00 15.0 5.00 25.0 5.00 21.5150 175.3 292 25.0 203 10.0 127 6.8 127 11.3 127 9.88 9.050 14.00 83.0 9.00 38.0 5.50 28.8 5.50 39.5 5.50 39.0200 229.9 356 37.7 229 17.2 140 13.1 140 17.9 140 17.710 11.100 16.50 160.0 11.00 76.0 6.50 43.3 6.50 67.0 6.50 77.0250 281.9 419 72.6 279 34.5 165 19.6 165 30.4 165 34.912 13.200 19.00 210.0 12.00 92.0 7.50 72.0 7.50 108.0 7.50 120.0300 335.3 483 95.3 305 41.7 191 32.7 191 49.0 191 54.414 15.300 21.50 261.0 14.00 174.0 7.50 104.0 7.50 92.0 7.50 101.0350 388.6 546 118.4 356 78.9 191 47.2 191 41.7 191 45.816 17.400 24.00 337.0 15.00 239.0 8.00 142.0 8.00 112.0 8.00 121.0400 442.0 610 152.9 381 108.4 203 64.4 203 50.8 203 54.918 19.500 26.50 451.0 16.50 328.0 8.50 186.0 8.50 145.0 8.50 146.0450 495.3 673 204.6 419 148.8 216 84.4 216 65.8 216 66.220 21.600 29.00 588.0 18.00 413.0 9.50 246.0 9.50 200.0 9.50 202.0500 548.6 737 266.7 457 187.3 241 111.6 241 90.7 241 91.624 25.800 34.00 909.0 22.00 668.0 11.00 414.0 11.00 282.0 11.00 284.0600 655.3 864 412.3 559 303.0 279 187.8 279 127.9 279 128.830 32.000 41.50 2136.0 25.00 1002.0 15.00 720.0 15.00 681.0 15.00 699.0750 762.0 1054 968.9 635 454.4 381 326.6 381 308.9 381 317.136 38.300 49.00 3120.0 28.00 1608.0 18.00 1152.0 18.00 975.0 18.00 1124.0900 914.4 1245 1415.2 711 729.4 457 522.6 457 442.3 457 509.8ElbowsNO. 100-C 90º Long Radius ElbowNO. 10-C 90º ElbowNO. 11-C 45º ElbowNO. 12-C 22 ½º ElbowNO. 13-C 11 ¼º Elbow23.05_2Ductile Iron AWWA (Cast) Fittings23.05AWWA DUCTILE IRON PIPE – GROOVED FITTINGSwww.victaulic.comVICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2007 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA.REV_IC to ECtoENO. 20-CC to LEC toSENO. 33-CC to ENO. 35-CC to LEC toLEC toSENO. 30-CTNO. 60-CSizeNo. 20-CTeeNo. 33-CTrue WyeNo. 35-CCrossNo. 30-C45° LateralNo. 60-CCap†NominalSizeInches/mmActualOutside Dia.InchesmmC to EInches mmApprox. Wgt. Each Lbs.kgC to LEInches mmC to SEInches mmApprox. Wgt. Each Lbs.kgC to EInches mmApprox. Wgt. Each Lbs.kgC to LEInches mmC to SEInches mmApprox. Wgt. Each Lbs.kgTThicknessInches mmApprox. Wgt. Each Lbs.kg3 3.960 5.50 14.2 5.50 3.00 25.00 5.50 24.0 10.00 3.00 28.0 1.22 3.080 100.6 140 6.4 140 76 635 140 10.9 254 76 12.7 31 1.44 4.800 6.50 19.0 6.50 3.00 55.0 6.50 40.0 12.00 3.00 38.4 1.16 5.0100 121.9 165 8.6 165 76 25.0 165 18.1 305 76 12.7 29 2.36 6.900 8.00 34.0 8.00 3.50 90.0 8.00 71.0 14.50 3.50 67.0 1.16 9.0150 175.3 203 15.4 203 89 40.8 203 32.2 368 89 30.4 29 4.18 9.050 9.00 59.0 9.00 4.50 140.0 9.00 106.0 17.50 4.50 120.0 1.34 16.0200 229.9 229 26.8 229 114 63.5 229 48.1 445 114 54.4 34 7.310 11.100 11.00 111.0 11.00 5.00 220.0 11.00 225.0 20.50 5.00 215.0 1.53 37.2250 281.9 279 50.4 279 127 99.8 279 102.1 521 127 97.5 39 16.912 13.200 12.00 136.0 12.00 5.50 315.0 12.00 310.0 24.50 5.50 346.0 1.53 52.0300 335.3 305 61.7 305 140 142.9 305 140.6 622 140 157.0 39 23.614 15.300 14.00 262.0 14.00 6.00 + 14.00 307.0 27.00 6.00 492.0 2.75* 55.0350 388.6 356 118.8 356 152 356 139.3 686 152 223.2 70 25.016 17.400 15.00 304.0 15.00 6.50 + 15.00 426.0 30.00 6.50 696.0 2.75* 68.0400 442.0 381 137.9 381 165 381 193.2 762 165 315.7 70 30.918 19.500 16.50 408.0 16.50 7.00 + 16.50 567.0 32.00 7.00 870.0 2.75* 90.0450 495.3 419 185.1 419 178 419 254.9 813 178 394.6 70 40.820 21.600 18.00 552.0 18.00 8.00 + 18.00 717.0 35.00 8.00 1103.0 2.75* 110.0500 548.6 457 250.4 457 203 457 325.2 889 203 500.3 70 50.024 25.800 22.00 980.0 22.00 9.00 + 22.00 1177.0 40.50 9.00 1746.0 2.75* 165.0600 655.3 559 444.5 559 229 559 533.9 1029 229 792.0 70 74.830 32.000 25.00 1552.0 25.00 10.00 + 25.00 1366.0 49.00 10.00 3280.0 4.00* 300.0750 762.0 635 704.0 635 254 635 619.6 1245 254 1487.8 102 136.136 38.300 28.00 2050.0 28.00 15.00 + 28.00 1885.0 56.00 15.25 5020.0 4.00* 536.0900 914.4 711 929.9 711 381 711 855.0 1422 387 2277.1 102 243.1* Dish caps. + Contact Victaulic for details.† Caps from ½ – 3"/15 – 80 mm tap sizes.Tee, True Wye, Cross, Lateral, and CapNO. 20-C TeeNO. 33-C True WyeNO. 35-C CrossNO. 30-C 45º LateralNO. 60-C CapSize Dimensions – Inches/mmApprox. Weight EachNominalSizeInches/mm C to EOR C to EOB Lbs. kg4 × 4 × 6 + + 47.0100 100 150 21.36 × 6 × 8 8.00 8.00 79.0150 150 200 203 203 35.88 × 8 × 10 11.00 11.00 164.0200 200 250 279 279 74.410 × 10 × 12 + + 226.0250 250 300 102.5+ Contact Victaulic for details.Bullhead TeeNO. 21-CC toEOBC toEORNO. 21-C23.05_3Ductile Iron AWWA (Cast) Fittings23.05AWWA DUCTILE IRON PIPE – GROOVED FITTINGSwww.victaulic.comVICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2007 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA.REV_IC to ECtoENO. 25-CJJHHNO. 35-CRC to LEC toLEC toSENO. 30-CRSizeNo. 25-CReducing TeeNo. 35-CRReducing CrossNo. 30-CR45° Reducing LateralNominalSizeInches/mmC to EORInchesmmC to EOBInchesmmApprox. Weight EachLbs.kgHInchesmmJInchesmmApprox. Weight EachLbs.kgC to LEInchesmmC to SEInchesmmApprox. Weight EachLbs.kg4 × 3 6.50 6.50 26.4 6.50 6.50 22.0 12.00 3.00 45.0100 80 165 165 12.0 165 165 10.0 305 76 20.46 × 3 8.00 8.00 30.0 8.00 8.00 46.0 14.50 3.50 74.0150 80 203 203 13.6 203 203 20.9 368 89 33.64 8.00 8.00 34.0 8.00 8.00 38.0 14.50 3.50 80.0100 203 203 15.4 203 203 17.2 368 89 36.38 × 3 9.00 9.00 + — — — — — —200 80 229 2294 9.00 9.00 78.0 9.00 9.00 76.0 17.50 4.50 125.0100 229 229 35.4 229 229 34.5 445 114 56.76 9.00 9.00 80.0 9.00 9.00 59.0 17.50 4.50 140.0150 229 229 36.3 229 229 26.8 445 114 63.510 × 4 11.00 11.00 120.0 11.00 11.00 120.0 20.50 5.00 204.0250 100 279 279 54.4 279 279 54.4 521 127 92.56 11.00 11.00 128.0 11.00 11.00 114.0 20.50 5.00 212.0150 279 279 58.1 279 279 51.7 521 127 96.28 11.00 11.00 130.0 11.00 11.00 123.0 20.50 5.00 236.0200 279 279 59.0 279 279 56.8 521 127 107.112 × 4 12.00 12.00 112.0 12.00 12.00 174.0 24.50 5.50 290.0300 100 305 305 50.8 305 305 78.9 622 140 131.56 12.00 12.00 180.0 12.00 12.00 130.0 24.50 5.50 302.0150 305 305 81.7 305 305 59.0 622 140 137.08 12.00 12.00 186.0 12.00 12.00 139.0 24.50 5.50 324.0200 305 305 84.4 305 305 63.1 622 140 147.010 12.00 12.00 192.0 12.00 12.00 154.0 24.50 5.50 356.0250 305 305 87.1 305 305 69.9 622 140 161.514 × 6 14.00 14.00 238.0 14.00 14.00 215.0 27.00 6.00 330.0350 150 356 356 108.0 356 356 97.5 686 152 149.78 14.00 14.00 241.0 14.00 14.00 221.0 27.00 6.00 346.0200 356 356 109.3 356 356 100.3 686 152 156.910 14.00 14.00 258.0 14.00 14.00 235.0 27.00 6.00 540.0250 356 356 114.8 356 356 106.6 686 152 244.912 14.00 14.00 267.0 14.00 14.00 244.0 27.00 6.00 625.0300 356 356 121.1 356 356 110.7 686 152 283.516 × 6 15.00 15.00 288.0 15.00 15.00 266.0 30.00 6.50 570.0400 150 381 381 130.6 381 381 120.7 762 165 258.68 15.00 15.00 315.0 15.00 15.00 276.0 30.00 6.50 585.0200 381 381 142.9 381 381 125.2 762 165 265.410 15.00 15.00 319.0 15.00 15.00 291.0 30.00 6.50 630.0250 381 381 144.7 381 381 132.0 762 165 285.812 15.00 15.00 330.0 15.00 15.00 305.0 30.00 6.50 650.0300 381 381 149.7 381 381 138.4 762 165 294.814 15.00 15.00 341.0 15.00 15.00 280.0 30.00 6.50 692.0350 381 381 154.7 381 381 127.0 762 165 313.9TABLE CONTINUED ON NEXT PAGEReducing FittingsNO. 25-C Reducing TeeNO. 35-CR Reducing CrossNO. 30-CR 45º Reducing Lateral23.05_4Ductile Iron AWWA (Cast) Fittings23.05AWWA DUCTILE IRON PIPE – GROOVED FITTINGSwww.victaulic.comVICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2007 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA.REV_IC to ECtoENO. 25-CJJHHNO. 35-CRC to LEC toLEC toSENO. 30-CRSizeNo. 25-CReducing TeeNo. 35-CRReducing CrossNo. 30-CR45° Reducing LateralNominalSizeInches/mmC to EORInchesmmC to EOBInchesmmApprox. Weight EachLbs.kgHInchesmmJInchesmmApprox. Weight EachLbs.kgC to LEInchesmmC to SEInchesmmApprox. Weight EachLbs.kg18 × 8 13.00 15.50 326.0 13.00 15.50 272.0 + + +450 200 330 394 147.9 330 394 123.410 13.00 15.50 332.0 13.00 15.50 277.0 32.00 7.00 765.0250 330 394 150.6 330 394 125.6 813 178 347.012 13.00 15.50 339.0 13.00 15.50 291.0 32.00 7.00 800.0300 330 394 153.8 330 394 132.0 813 178 362.914 16.50 16.50 441.0 16.50 16.50 361.0 32.00 7.00 865.0350 419 419 200.0 419 419 163.7 813 178 392.416 16.50 16.50 453.0 16.50 16.50 367.0 32.00 7.00 895.0400 419 419 205.5 419 419 166.5 813 178 406.020 × 6 14.00 17.00 + — — — — — —500 150 356 4328 14.00 17.00 412.0 14.00 17.00 343.0 — — —200 356 432 186.9 356 432 155.610 14.00 17.00 419.0 14.00 17.00 343.0 + + +250 356 432 190.1 356 432 155.612 14.0 17.00 426.0 14.00 17.00 357.0 35.00 8.00 1000.0300 356 432 193.2 356 432 161.9 889 203 453.614 14.00 17.00 443.0 14.00 17.00 327.0 35.00 8.00 1062.0350 356 432 201.0 356 432 148.3 889 203 481.716 18.00 18.00 571.0 18.00 18.00 458.0 35.00 8.00 1105.0400 457 457 259.0 457 457 207.7 889 203 501.218 18.00 18.00 584.0 18.00 18.00 469.0 35.00 8.00 1150.0450 457 457 264.9 457 457 212.7 889 203 521.624 × 6 15.00 19.00 + — — — — — —600 150 381 4838 15.00 19.00 + + + + + + +200 381 48310 15.00 19.00 + + + + + + +250 381 48312 15.00 19.00 593.0 15.00 19.00 475.0 + + +300 381 483 269.0 381 483 215.514 15.00 19.00 610.0 15.00 19.00 450.0 40.50 9.00 1510.0350 381 483 276.7 381 483 204.1 1029 229 684.916 15.00 19.00 620.0 15.00 19.00 446.0 40.50 9.00 1580.0400 381 483 281.2 381 483 202.3 1029 229 716.718 22.00 22.00 918.0 22.00 22.00 782.0 40.50 9.00 871.0450 559 559 416.4 559 559 354.7 1029 229 395.120 22.00 22.00 937.0 22.00 22.00 788.0 40.50 9.00 1705.0500 559 559 425.0 559 559 357.4 1029 229 773.4TABLE CONTINUED ON NEXT PAGEReducing FittingsNO. 25-C Reducing TeeNO. 35-CR Reducing CrossNO. 30-CR 45º Reducing Lateral23.05_5Ductile Iron AWWA (Cast) Fittings23.05AWWA DUCTILE IRON PIPE – GROOVED FITTINGSwww.victaulic.comVICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2007 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA.REV_IC to ECtoENO. 25-CJJHHNO. 35-CRC to LEC toLEC toSENO. 30-CRSizeNo. 25-CReducing TeeNo. 35-CRReducing CrossNo. 30-CR45° Reducing LateralNominalSizeInches/mmC to EORInchesmmC to EOBInchesmmApprox. Weight EachLbs.kgHInchesmmJInchesmmApprox. Weight EachLbs.kgC to LEInchesmmC to SEInchesmmApprox. Weight EachLbs.kg30 × 6 18.00 23.00 + 18.00 23.00 — — — —750 150 457 584 457 5848 18.00 23.00 + 18.00 23.00 + + + +200 457 584 457 58410 18.00 23.00 + 18.00 23.00 + + + +250 457 584 457 58412 18.00 23.00 1175.0 18.00 23.00 888.0 49.00 10.00 2178.0300 457 584 533.0 457 584 402.8 1245 254 987.914 18.00 23.00 1250.0 18.00 23.00 853.0 49.00 10.00 2208.0350 457 584 567.0 457 584 386.9 1245 254 1001.516 18.00 23.00 1437.0 18.00 23.00 843.0 49.00 10.00 2248.0400 457 584 651.0 457 584 382.4 1245 254 1019.718 18.00 23.00 1450.0 18.00 23.00 839.0 49.00 10.00 2294.0450 457 584 657.7 457 584 380.6 1245 254 1040.620 18.00 23.00 1462.0 18.00 23.00 835.0 49.00 10.00 2339.0500 457 584 663.2 457 584 378.8 1245 254 1061.024 25.00 25.00 1475.0 25.00 25.00 1304.0 49.00 10.00 2451.0600 635 635 669.1 635 635 591.5 1245 254 1111.836 × 8 20.00 26.0 + 20.00 26.00 + + + +900 200 508 660 508 66010 20.00 26.00 + 20.00 26.00 + + + +250 508 660 508 66012 20.00 26.00 + 20.00 26.00 1262.0 + + +300 508 660 508 660 572.414 20.00 26.00 + 20.00 26.00 1222.0 54.00 15.25 +350 508 660 508 660 554.3 1372 38716 20.00 26.00 + 20.00 26.00 1213.0 54.00 15.25 3493.0400 508 660 508 660 550.2 1372 387 1584.418 20.00 26.00 + 20.00 26.00 1204.0 54.00 15.25 3533.0450 508 660 508 660 546.1 1372 387 1602.620 20.00 26.00 + 20.00 26.00 1190.0 54.00 15.25 3574.0500 508 660 508 660 539.8 1372 387 1621.224 20.00 26.00 + 20.00 26.00 1163.0 54.00 15.25 3675.0600 508 660 508 660 527.5 1372 387 1667.030 28.00 28.00 + 28.00 28.00 1865.0 56.00 15.25 3879.0750 711 711 711 711 846.0 1422 387 1759.5+ Contact Victaulic for details.IMPORTANT NOTE: Non-standard reducing cross sizes are available. Contact Victaulic for details.Reducing FittingsNO. 25-C Reducing TeeNO. 35-CR Reducing CrossNO. 30-CR 45º Reducing Lateral23.05_6Ductile Iron AWWA (Cast) Fittings23.05AWWA DUCTILE IRON PIPE – GROOVED FITTINGSwww.victaulic.comVICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2007 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA.REV_IE to ENO. 50-CE to ENO. 51-CC to ENO. 10-CRC to ENO. 100-CRSizeNo. 50-CConcentric ReducerNo. 51-CEccentric ReducerNo. 10-CR90° Reducing ElbowNo. 100-CR90° Long Radius Red. El.NominalSizeInches/mmE to EInchesmmApprox. Weight EachLbs.kgE to EInchesmmApprox. Weight EachLbs.kgC to EInchesmmApprox.Weight EachLbs.kgC to EInchesmmApprox. Weight EachLbs.kg4 × 3 7.00 10.0 7.00 12.0 6.50 17.0 9.00 20.0100 80 178 4.5 178 5.4 165 7.7 229 8.16 × 3 9.00 15.0 9.00 20.0 8.00 28.5 11.50 36.0150 80 229 6.8 229 9.1 203 12.9 292 16.34 9.00 16.5 9.00 25.0 8.00 29.6 11.50 40.0100 229 7.5 229 11.3 203 13.4 292 18.18 × 3 11.00 33.0 11.00 + — — — —200 80 279 15.0 2794 11.00 28.0 11.00 35.0 9.00 46.5 14.00 60.0100 279 12.7 279 15.9 229 21.1 356 27.26 11.00 34.0 11.00 44.0 9.00 48.5 14.00 71.0150 279 15.4 279 20.0 229 22.0 356 32.210 × 4 12.00 42.0 12.00 54.0 11.00 68.0 16.50 90.0250 100 305 19.1 305 24.5 279 30.8 419 40.86 12.00 46.0 12.00 60.0 11.00 77.0 16.50 106.0150 305 20.9 305 27.2 279 34.9 419 48.18 12.00 50.0 12.00 70.0 11.00 88.0 16.50 121.0200 305 22.7 305 31.8 279 39.9 419 54.912 × 4 14.00 60.0 14.00 82.0 12.00 + + +300 100 356 27.2 356 37.2 3056 14.00 70.0 14.00 84.0 12.00 110.0 19.00 143.0150 356 31.8 356 38.1 305 49.9 483 64.98 14.00 74.0 14.00 91.0 12.00 126.0 19.00 163.0200 356 33.6 356 41.3 305 57.2 483 73.910 14.00 84.0 14.00 110.0 12.00 150.0 19.00 188.0250 356 38.1 356 49.9 305 68.0 483 85.314 × 6 16.00 89.0 16.00 104.0 14.00 + + +350 150 406 40.4 406 47.2 3568 16.00 102.0 16.00 121.0 14.00 135.0 21.50 183.0200 406 46.3 406 54.9 356 61.2 546 83.010 16.00 112.0 16.00 135.0 14.00 170.0 21.50 213.0250 406 50.8 406 61.2 356 77.1 546 96.612 16.00 126.0 16.00 150.0 14.00 195.0 21.50 240.0300 406 57.4 406 68.0 356 88.5 546 108.916 × 6 18.00 11.0 18.00 140.0 — — + +400 150 457 49.9 457 63.58 18.00 122.0 18.00 160.0 15.00 + 24.00 228.0200 457 55.3 457 72.6 381 610 103.410 18.00 135.0 18.00 168.0 15.00 195.0 24.00 263.0250 457 61.2 457 76.2 381 88.5 610 119.312 18.00 146.0 18.00 190.0 15.00 240.0 24.00 295.0300 457 66.2 457 86.2 381 108.9 610 133.814 18.00 173.0 18.00 210.0 15.00 280.0 24.00 290.0350 457 78.5 457 95.3 381 127.0 610 131.5TABLE CONTINUED ON NEXT PAGEReducers and Reducing ElbowsNO. 50-C Concentric ReducerNO. 51-C Eccentric ReducerNO. 10-CR 90º Reducing ElbowNO. 100-CR 90º Long Radius Reducing Elbow23.05_7Ductile Iron AWWA (Cast) Fittings23.05AWWA DUCTILE IRON PIPE – GROOVED FITTINGSwww.victaulic.comVICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2007 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA.REV_IE to ENO. 50-CE to ENO. 51-CC to ENO. 10-CRC to ENO. 100-CRSizeNo. 50-CConcentric ReducerNo. 51-CEccentric ReducerNo. 10-CR90° Reducing ElbowNo. 100-CR90° Long Radius Red. El.NominalSizeInches/mmE to EInchesmmApprox. Weight EachLbs.kgE to EInchesmmApprox. Weight EachLbs.kgC to EInchesmmApprox.Weight EachLbs.kgC to EInchesmmApprox. Weight EachLbs.kg18 × 8 19.00 148.0 19.00 180.0 16.50 + — —450 200 483 67.1 483 81.6 41910 19.00 158.0 19.00 215.0 16.50 + 26.50 +250 483 71.1 483 97.5 419 67312 19.00 173.0 19.00 215.0 16.50 305.0 26.50 336.0300 483 78.5 483 97.5 419 138.3 673 152.414 19.00 200.0 19.00 230.0 16.50 345.0 26.50 355.0350 483 90.7 483 104.3 419 156.5 673 161.016 19.00 220.0 19.00 275.0 16.50 360.0 26.50 386.0400 483 100.0 483 124.7 419 163.3 673 175.120 × 8 20.00 173.0 20.00 + — — — —500 200 508 78.5 50810 20.00 182.0 20.00 215.0 18.00 + 29.00 +250 508 82.6 508 97.5 457 73712 20.00 201.0 20.00 250.0 18.00 365.0 29.00 +300 508 91.2 508 113.4 457 165.6 73714 20.00 230.0 20.00 270.0 18.00 405.0 29.00 +350 508 104.3 508 122.5 457 183.7 73716 20.00 251.0 20.00 300.0 18.00 440.0 29.00 466.0400 508 113.9 508 136.1 457 199.6 737 211.418 20.00 275.0 20.00 320.0 18.00 485.0 29.00 507.0450 508 124.7 508 145.2 457 220.0 737 230.024 × 8 24.00 257.0 24.00 300.0 + + + +600 200 610 116.6 610 136.110 24.00 274.0 24.00 300.0 + + + +250 610 124.3 610 136.112 24.00 293.0 24.00 395.0 22.00 590.0 34.00 +300 610 132.9 610 179.2 559 267.6 86414 24.00 331.0 24.00 425.0 22.00 630.0 34.00 +350 610 150.1 610 192.8 559 285.8 86416 24.00 358.0 24.00 455.0 22.00 690.0 34.00 658.0400 610 162.4 610 206.4 559 313.0 864 298.518 24.00 386.0 24.00 465.0 22.00 735.0 34.00 +450 610 175.1 610 210.9 559 333.4 86420 24.00 418.0 24.00 525.0 22.00 815.0 34.00 759.0500 610 189.6 610 238.1 559 369.7 864 344.3TABLE CONTINUED ON NEXT PAGEReducers and Reducing ElbowsNO. 50-C Concentric ReducerNO. 51-C Eccentric ReducerNO. 10-CR 90º Reducing ElbowNO. 100-CR 90º Long Radius Reducing Elbow23.05_8Ductile Iron AWWA (Cast) Fittings23.05AWWA DUCTILE IRON PIPE – GROOVED FITTINGSwww.victaulic.comVICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2007 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA.REV_IE to ENO. 50-CE to ENO. 51-CC to ENO. 10-CRC to ENO. 100-CRSizeNo. 50-CConcentric ReducerNo. 51-CEccentric ReducerNo. 10-CR90° Reducing ElbowNo. 100-CR90° Long Radius Red. El.NominalSizeInches/mmE to EInchesmmApprox. Weight EachLbs.kgE to EInchesmmApprox. Weight EachLbs.kgC to EInchesmmApprox.Weight EachLbs.kgC to EInchesmmApprox. Weight EachLbs.kg30 × 8 + + + + + + — —750 20010 + + + + + + — —25012 30.00 + 30.00 + + + — —300 762 76214 30.00 + 30.00 + 25.00 + — —350 762 762 635.016 30.00 + 30.00 + 25.00 + 41.50 +400 762 762 635.0 105418 30.00 + 30.00 + 25.00 + 41.50 +450 762 762 635.0 105420 30.00 + 30.00 + 25.00 + 41.50 +500 762 762 635.0 105424 30.00 + 30.00 + 25.00 1170.0 41.50 +600 762 762 635.0 530.7 105436 × 8 + + + + + + — —900 20010 + + + + + + — —25012 + + + + + + — —30014 36.00 + 36.00 + + + — —350 914 91416 36.00 + 36.00 + + + — —400 914 91418 36.00 + 36.00 + + + — —450 914 91420 36.00 1280.0 36.00 + + + 49.00 +500 914 580.6 914 124524 36.00 1370.0 36.00 + + + 49.00 +600 914 621.4 914 124530 36.00 1450.0 36.00 + + + 49.00 +750 914 657.7 914 1245+ Contact Victaulic for details.IMPORTANT NOTE:For 30"/750 mm sizes and larger contact Victaulic for details.Reducers and Reducing ElbowsNO. 50-C Concentric ReducerNO. 51-C Eccentric ReducerNO. 10-CR 90º Reducing ElbowNO. 100-CR 90º Long Radius Reducing Elbow23.05_9Ductile Iron AWWA (Cast) Fittings23.05AWWA DUCTILE IRON PIPE – GROOVED FITTINGSwww.victaulic.comVICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2007 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA.REV_ISRTUNO. 10-CBSTRUNO. 20-CBSTURNO. 25-CBSTURNO. 100-CBSWROUND BASESize Dimensions – Inches/mmApprox. Weight EachNominalSizeInches/mmActualOutside Dia.Inchesmm R U T S WNo. 10-CBBase ElbowLbs.kgNo. 20-CBBase TeeLbs.kgNo. 100-CBLR Base ElbowLbs.kgNo. 25-CBRed. Base TeeLbs.kg3 3.960 4.88 0.50 0.56 5.00 3.88 19.0 19.0 — +80 100.6 124 13 14 127 99 8.6 8.64 4.800 5.50 0.50 0.62 6.00 4.75 23.6 26.0 — +100 121.9 140 13 16 152 121 10.7 11.86 6.900 7.00 0.62 0.69 7.00 5.50 42.0 50.0 — +150 175.3 178 16 18 178 140 19.1 22.78 9.050 8.38 0.88 0.94 9.00 7.50 75.0 92.0 — +200 229.9 213 22 24 229 191 34.0 41.710 11.100 9.75 0.88 0.94 9.00 7.50 114.0 125.0 — +250 281.9 248 22 24 229 191 51.7 56.712 13.200 11.25 1.00 1.00 11.00 9.50 152.0 183.0 — +300 335.3 286 25 25 279 241 69.0 83.014 15.300 12.50 1.00 1.00 11.00 9.50 — — 340.0 +350 388.6 318 25 25 279 241 154.216 17.400 13.75 1.00 1.00 11.00 9.50 — — 425.0 +400 442.0 349 25 25 279 241 192.818 19.500 15.00 1.12 1.12 13.50 11.75 — — 591.0 +450 495.3 381 29 29 343 299 268.120 21.600 16.00 1.12 1.12 13.50 11.75 — — 717.0 +500 548.6 406 29 29 343 299 325.224 25.800 18.50 1.12 1.12 13.50 11.75 — — 1056.0 +600 655.3 470 29 29 343 299 479.0+ 90° reducing elbows are available with a base. Contact Victaulic for details.IMPORTANT NOTES:Bolt hole template shown for round base is the same as for the flange of the supporting pipe size, except using only four holes in all cases so placed as to straddle center lines. The bases of these fittings are intended for support in compression and are not to be used for anchors or supports in tension or sheer.Grooved end base 90° elbows (#X-90 CDI) and base tees (#X-CDI) are available with dimensions to ANSI B16.1.Side base fittings are available. Contact Victaulic for details.For Center to End dimensions, refer to corresponding fitting without the base.Base FittingsNO. 10-CB Base ElbowNO. 20-CB Base TeeNO. 25-CB Reducing Base TeeNO. 100-CB Long Radius Base Elbow23.05_10Ductile Iron AWWA (Cast) Fittings23.05AWWA DUCTILE IRON PIPE – GROOVED FITTINGSwww.victaulic.comVICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2007 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA.REV_IC to ECtoFNO. 10-CFC to ECtoFNO. 100-CFEtoENO. 43-CFC to ENO. 10-CSC to ENO. 20-CSSizeNo. 10-CF90° FlareNo. 100-CF90° Long Radius FlareNo. 43-CFStraight FlareNo. 10-CS*90° Side OutletNo. 20-CS*Tee Side OutletNominalSizeInches/mmActualOutside Dia.InchesmmC to EInchesmmC to FInchesmmApprox. Wgt. Each Lbs.kgC to EInchesmmC to FInchesmmApprox. Wgt. Each Lbs.kgE to EInchesmmApprox. Wgt. Each Lbs.kgC to EInchesmmApprox. Wgt. Each Lbs.kgC to EInchesmmApprox. Wgt. Each Lbs.kg3 3.960 5.50 9.00 18.0 7.75 11.25 23.0 8.00 13.0 5.50 13.0 5.50 28.080 100.6 140 229 8.2 197 286 10.4 203 5.9 140 5.9 140 12.74 4.800 6.50 9.50 35.0 9.00 12.50 42.0 8.00 17.0 6.50 30.0 6.50 42.0100 121.9 165 241 15.9 229 318 19.1 203 7.7 165 13.6 165 19.16 6.900 8.00 11.50 70.0 11.50 15.00 68.0 8.00 23.0 8.00 58.0 8.00 85.0150 175.3 203 292 31.8 292 381 30.9 203 10.4 203 26.3 203 38.68 9.050 9.00 13.50 120.0 14.00 18.50 118.0 10.00 43.0 9.00 90.0 9.00 114.0200 229.9 229 343 54.4 356 470 53.5 254 19.5 229 40.8 229 51.710 11.100 11.00 16.50 157.0 16.50 22.50 188.0 10.00 58.0 11.00 124.0 11.00 219.0250 281.9 279 419 71.2 419 572 85.3 254 26.3 279 56.3 279 99.312 13.200 12.00 18.50 190.0 19.00 25.50 275.0 12.00 100.0 12.00 170.0 12.00 295.0300 335.3 305 470 86.2 483 648 124.7 305 45.4 305 77.1 305 133.814 15.300 14.00 21.50 235.0 21.50 29.00 325.0 12.00 90.0 14.00 + + +350 388.6 356 546 106.6 546 737 147.4 305 40.8 35616 17.400 15.00 23.00 300.0 24.00 32.00 435.0 16.00 145.0 15.00 + + +400 442.0 381 584 136.1 610 813 197.3 406 65.8 38118 19.500 16.50 25.00 391.0 26.50 35.00 571.0 16.00 205.0 16.50 + + +450 495.3 419 635 177.4 673 889 259.0 406 93.0 41920 21.600 18.00 27.00 496.0 29.00 38.00 731.0 18.00 221.0 18.00 + + +500 548.6 457 686 255.0 737 965 331.6 457 100.3 45724 25.800 22.00 32.50 808.0 34.00 44.50 1642.0 18.00 293.0 22.00 + + +600 655.3 559 826 366.5 864 1130 744.8 457 132.9 55930 32.000 + + + + + + 24.00 567.0 + + + +750 762.0 610 257.236 38.300 + + + + + + 24.00 736.0 + + + +900 914.4 610 333.9+ Contact Victaulic for details.* Reducing side outlet 90° Elbows, Tees, and Crosses are available. Contact Victaulic for details.Flared and Outlet FittingsNO. 10-CF 90º FlareNO. 100-CF 90º Long Radius FlareNO. 43-CF Straight FlareNO. 10-CS 90º Side OutletNO. 20-CS Tee Side Outlet23.05_11Ductile Iron AWWA (Cast) Fittings23.05AWWA DUCTILE IRON PIPE – GROOVED FITTINGSwww.victaulic.comVICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2007 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA.REV_IWARRANTY Refer to the Warranty section of the current Price List or contact Victaulic for details.This product shall be manufactured by Victaulic or to Victaulic specifications. All products to be installed in accordance with current Victaulic installation/assembly instructions. Victaulic reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligations.NOTEKLMNRSTEHGFRSTYMKNTRYGEF TREGFR K MNRRSTLMNKRSTHEFGVYTRKMNVYTRE GFSHGFJELMNKPX Y ZT S RF G HZ Y XR S TN M KMNKRSTG FERSTEGHFT RKMNLR T F HGKNME HGFL KMNTapped Fittings45° LATERAL – STRAIGHT & REDUCING90° ELBOW – STRAIGHT SIZE90° BASE ELBOW – STRAIGHT & REDUCINGTEE – STRAIGHT SIZES90° ELBOW REDUCING SIZES90° ELBOWCROSS – STRAIGHT SIZEECCENTRIC REDUCER45° ELBOW BASE FITTINGSBASE TEE CONCENTRIC REDUCERTRUE WYEElbows Tees, Crosses, Wyes, and LateralsReducersVictaulic can supply tapped fittings on order to ANSI B16.1 dimension locations. Specify fittings size, tap location by letter (as shown below) and tap size (NPT dimensions) on order.23.05Ductile Iron AWWA (Cast) Fittings23.05AWWA DUCTILE IRON PIPE – GROOVED FITTINGSWCAS-6UBJ4KFor complete contact information, visit www.victaulic.com23.05 1680 REV I UPDATED 5/2007VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2007 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA.