Ball Tack Welding Pens Datasheet

SOUDAX EQUIPEMENTS - Z.I. - 14, avenue de la Mauldre - 78680 Epone - France - Tel.: +33(0)1 30 95 96 64 - Fax: +33 (0)1 30 95 70 82Hand tools > PenCS 1 - CS 5 - CS 10 ASP Vacuum Welding Pen1DaN, 5DaN and 10DaN,  DESCRIPTION :     Welding  pressure is set with a knurled screw located at the front of the pen.     Ergonomic body in aluminium or in plastic with flange.     Equipped with a dry contact plug (Amphenol). APPLICATIONS :    Welding pen to spot weld stainless steel or tin balls, brazing alloys, parts of small sizes as thermocouples or strain gauge assembled with bigger parts.     CS ASP vacuum system allows to maintain the ball on the electrode only by vacuum (hollow electrode).     CS ASP pen is essentially used to position parts before brazing (jet engine blades, saxophone parts,         etc....)   CHARACTERISTICS : MODEL CS 1 ASP CS 5 ASP  CS 10 ASP The cable can be equipped with an eyelet typeconnection or with a quickdisconnected plugFORCE MAXI 1 DaN 5 DaN  10 DaN ELECTRODE CS 340 ASP CS 340 ASP  CS 650 ASP ELECTRODE DIAMETER Ø 3 Ø 3  Ø 6CABLE SECTION 16 mm² 16 mm²   35 mm²CABLE LENGHT 1200 mm  1200 mm   1200 mm     CS ASPCS ASP BP SPELinked productsPAVACUUM PUMPPMGROUND CLAMPPMMSGROUND CLAMP WITH SOFT JAWSDedicated applicationsPointage avant brasageSOUDAX EQUIPEMENTS - Z.I. - 14, avenue de la Mauldre - 78680 Epone - France - Tel.: +33(0)1 30 95 96 64 - Fax: +33 (0)1 30 95 70 82Linked productsPAVACUUM PUMPPMGROUND CLAMPPMMSGROUND CLAMP WITH SOFT JAWSDedicated applicationsPointage avant brasage