Ball Valves Brochure

WWW.ABOVALVE.COM / INDUSTRIAL VALVES MANUFACTURERBALL VALVESBALL VALVESflow controlflow controlBALL VALVESDN 8 – 100PN 63, 40Applications:chemical and petrochemical industries, water treatment, power plants,paper industry, refi neries, oils, gas, shipbuilding, pharmacy,food & beveragesART. 940 / ART. 941ART. 9402Stainless steel ball valve:• 2 – pieces• Full bore• F.F. thread (BSPP / BSPT)• DN 8 - 25 PN 63, DN 32- 50 PN 40• Thread end: ANSI B 1.20.1 (NPT) ISO 7/1 (Rc/Rp) ISO 228/1 (G)310 13562118712149BADCDN A B ± 2 C D8 10 50 41,4 8010 12,5 50 41,4 8015 15 60 45 8020 20 70 54,7 10025 24,5 80 65,3 12532 32 93 70,9 12540 38 103 84 16050 50 123 93,3 160ITEM PART NAMEMATERIALQUANTITYArt. 9401 Body EN10213 1.4408 12 End caps EN10213 1.4408 13 Seat PTFE + 15% G.F. 24 Ball CF8M/316 15 Stem SUS 316 16 Gasket PTFE 17 Gasket PTFE 18 Seal PTFE 19 Packing gland SUS 304 110 Handle SUS 304 111 Lever spring washer SUS 304 112 Lever nut SUS 304 113 Plastic coating PVC 1ART. 941Stainless steel ball valve:• 2-pieces with ISO fl anged connections • Full bore• F.F. thread (BSPP / BSPT)• PN 63• Thread end: ANSI B 1.20.1 (NPT) ISO 7/1 (Rc/Rp) ISO 228/1 (G)DN A B C D H L J J1 d1 d2 SW8 11,1 57 72,7 110 42,3 8 42 50 6 7 910 11,1 57 72,7 110 42,3 8 42 50 6 7 915 15 57 70,2 110 42,3 8 42 50 6 7 920 20 71 72,7 110 44,8 8 42 50 6 7 925 24,5 83 83,5 135 54 10 42 50 6 7 1132 32 91 100 165 59,2 10 50 70 7 9 1140 38 104 100,8 165 71,3 10 50 70 7 9 1150 50 123 118 165 82,9 14,8 50 70 7 9 14ITEM PART NAMEMATERIALQUANTITYArt. 9411 Body EN10213 1.4408 12 End caps EN10213 1.4408 13 Seats PTFE + 15% G.F. 24 Ball CF8M/316 15 Stem SUS 316 16 Gasket PTFE 17 Gasket PTFE + 15% G.F. 18 Seal PTFE 19 Gland ring SUS 304 210 Belleville spring washer SUS 301 211 Handle SUS 304 112 Lever nut SUS 304 213 Stop screw SUS 304 114 Plastic coating PVC 115 O-ring VITON 1 - 216 Locking tab SUS 304 117 Static device SUS 316 218 Spring SUS 316 213d2JJ1SWd11514161234567811 12109ABDC17181718Dimensions in mm. Permissible deviations ± 2 mm.Dimensions in mm. Permissible deviations ± 2 mm.DN 8 10 15 20 25 32 40 50Nm 1,76 1,76 2,65 8,04 9,51 13,24 17,16 21,27Note: The torque fi gures were measured under 0 pressure at room temperature(without safety factor).OPERATING TORQUESDN 15 20 25 32 40 50Nm 4,12 4,61 9,02 9,61 12,55 21,27Note: The torque fi gures were measured under 0 pressure at room temperature(without safety factor).OPERATING TORQUESART. 942 / ART. 9433ART. 942Stainless steel ball valve:• 3-pieces • Full bore• F.F. thread (BSPP / BSPT)• DN 8 - 25 PN 63, DN 32- 50 PN 40• Thread end: ANSI B 1.20.1 (NPT) ISO 7/1 (Rc/Rp) ISO 228/1 (G)ART. 943DN A B ± 2 C D E F G B1 ± 28 10 50 41,4 80 10 13 14 7010 12,5 60 41,4 80 12,5 13 18 7015 15 75 45 80 16 17 22 7520 20 80 54,7 100 20 22 27,5 9025 24,5 90 65,3 125 24,5 28 34,5 10032 32 110 70,9 125 32 37 43 11040 38 120 84 160 38 43 49 12550 50 140 93,3 160 50 54 61,5 150ITEM PART NAME MATERIAL QUANTITYArt. 9421 Body EN10213 1.4408 12 End caps EN10213 1.4408 23 Seat PTFE + 15% G.F. 24 Ball CF8M/316 15 Stem SUS 316 16 Gasket PTFE 17 Seal PTFE 18 Packing gland SUS 304 19 Handle SUS 304 110 Lever spring washer SUS 304 111 Lever nut SUS 304 112 Plastic coating VINYL 113 Bolts SUS 304 414 Bolts nut SUS 304 415 Spring washer SUS 304 416 Body seal PTFE + 15% G.F. 2ITEM PART NAMEMATERIALQUANTITYArt. 9431 Body EN10213 1.4408 12 End caps EN10213 1.4408 23 Seat PTFE + 15% G.F. 24 Ball CF8M/316 15 Stem SUS 316 16 Gasket PTFE 17 Seal PTFE 18 Packing gland SUS 304 19 Handle SUS 304 110 Lever spring washer SUS 304 111 Lever nut SUS 304 112 Plastic coating VINYL 113 Bolts SUS 304 414 Bolts nut SUS 304 415 Spring washer SUS 304 416 Body seal PTFE + 15% G.F. 278111215139141012345616AB/B1DCE F GDN A B ±2 C D E F G B1 ±28 10 50 41,4 80 10 13 14 7010 12,5 70 41,4 80 12,5 13 18 7015 15 75 45 80 16 17 22 7520 20 90 54,7 100 20 22 27,5 9025 24,5 100 65,3 125 24,5 28 34,5 10032 32 110 70,9 125 32 37 43 11040 38 125 84 160 38 43 49 12550 50 150 93,3 160 50 54 61,5 150Dimensions in mm. Permissible deviations ± 2 mm.Dimensions in mm. Permissible deviations ± 2 mm.Stainless steel ball valve:• 3-pieces • Full bore• Welding pipe connection • DN 8 - 25 PN 63, DN 32- 50 PN 40• Welding end: EN 12627 DN 8 10 15 20 25 32 40 50Nm 1,76 1,76 3,92 5,39 7,65 14,22 19,41 22,06Note: The torque fi gures were measured under 0 pressure at room temperature(without safety factor).OPERATING TORQUESDN 8 10 15 20 25 32 40 50Nm 1,76 1,76 3,92 5,39 7,65 14,22 19,41 22,06Note: The torque fi gures were measured under 0 pressure at room temperature(without safety factor).OPERATING TORQUESART. 944 / ART. 945ART. 9444Stainless steel ball valve:• 3-pieces with ISO fl anged connection• Full bore• F.F. thread (BSPP / BSPT)• PN 63• Thread end: ANSI B 1.20.1 (NPT) ISO 7/1 (Rc/Rp) ISO 228/1 ART. 945Stainless steel ball valve:• 3-pieces with ISO fl anged connection• Full bore• Welding pipe connection• PN 63• Welding end: EN 12627DN A B B1 C D E F F1 G J J1 SW d1 d2 H L8 11,1 75 75 70,9 110 14,2 13 17,2 25,2 36 42 9 6 6 42,3 810 11,1 75 75 70,9 110 17,7 13 17,2 25,2 36 42 9 6 6 42,3 815 16 75 75 70,9 110 21,9 17 22,4 25,2 36 42 9 6 6 42,3 820 20 80 90 73,4 110 27,2 22 28,2 27,7 36 42 9 6 6 44,8 825 24,5 90 100 84,1 135 34 28 33,7 33 42 50 11 6 7 54 1032 32 110 110 89,3 135 42,7 37 44 41,2 42 50 11 6 7 59,2 1040 38 120 125 109,5 165 48,8 43 50,8 49,3 50 70 14 7 9 73,5 14,850 50 140 150 118,9 165 61,3 54 62,6 63,6 50 70 14 7 9 82,9 14,8DN A B B1 C D E F F1 G J J1 SW d1 d2 H L8 11,1 75 75 70,9 110 14,2 13 17,2 25,2 36 42 9 6 6 42 810 11,1 75 75 70,9 110 17,7 13 17,2 25,2 36 42 9 6 6 42 815 16 75 75 70,9 110 21,9 17 22,4 25,2 36 42 9 6 6 42 820 20 80 90 73,4 110 27,2 22 28,2 27,7 36 42 9 6 6 45 825 24,5 90 100 84,1 135 34 28 33,7 33 42 50 11 6 7 54 1032 32 110 110 89,3 135 42,7 37 44 41,2 42 50 11 6 7 59 1040 38 120 125 110 165 48,8 43 50,8 49,3 50 70 14 7 9 74 1550 50 140 150 119 165 61,3 54 62,6 63,6 50 70 14 7 9 83 15www.abovalve.comabovalve@abovalve.com11516426108512189 1431971711AB/B1HDCGL 13d2J1JSWd1EA2021F1FADimensions in mm. Permissible deviations ± 2 mm.Dimensions in mm. Permissible deviations ± 2 mm.DN 15 20 25 32 40 50Nm 3,73 5,10 6,57 9,61 16,47 32,16Note: The torque fi gures were measured under 0 pressure at room temperature (without safety factor).OPERATING TORQUESDN 15 20 25 32 40 50Nm 3,73 5,10 6,57 9,61 16,47 32,16Note: The torque fi gures were measured under 0 pressure at room temperature (without safety factor).OPERATING TORQUESITEM PART NAMEMATERIALQUANTITYArt. 9441 Body EN10213 1.4408 12 End caps EN10213 1.4408 23 Seats PTFE + 15% G.F. 24 Ball CF8M/316 15 Stem SUS 316 16 Body seal PTFE 27 Gasket PTFE + 15% G.F. 18 Seal PTFE 19 Gland ring SUS 304 210 Belleville spring washer SUS 301 211 Handle SUS 304 112 Lever nut SUS 304 113 Stop screw SUS 304 114 Plastic coating PVC 115 Bolts SUS 304 416 Spring washer SUS 304 417 Bolts nut SUS 304 418 O – ring VITON 1 - 219 Locking tab SUS 304 120 Static device SUS 316 221 Spring SUS 316 2ITEM PART NAMEMATERIALQUANTITYArt. 9451 Body EN10213 1.4408 12 End caps EN10213 1.4408 23 Seats PTFE + 15% G.F. 24 Ball CF8M/316 15 Stem SUS 316 16 Body seal PTFE 27 Gasket PTFE + 15% G.F. 18 Seal PTFE 19 Gland ring SUS 304 210 Belleville spring wahser SUS 301 211 Handle SUS 304 112 Lever nut SUS 304 113 Stop screw SUS 304 114 Plastic coating PVC 115 Bolts SUS 304 416 Spring washer SUS 304 417 Bolts nut SUS 304 418 O – ring VITON 1 - 219 Locking tab SUS 304 120 Static device SUS 316 221 Spring SUS 316 2ART. 946 / ART. 9475ART. 946ART. 947DN A B C D E F G H × N L L1 I P Q J J1 d1 d2 SW15 16 45 65 95 89 114 16 14 × 4 115 130 2 54 8 36 42 6 6 920 20 58 75 105 89 114 18 14 × 4 120 150 2 56 8 36 42 6 6 925 25 68 85 115 101 187 18 14 × 4 125 160 2 62,5 12 42 50 6 7 1132 32 78 100 140 112 187 18 18 × 4 130 180 2 72 12 42 50 6 7 1140 40 88 110 150 116 222 18 18 × 4 140 200 3 78 14,8 50 70 7 9 1450 50 102 125 165 125 222 20 18 × 4 150 230 3 87,2 14,8 50 70 7 9 14ITEM PART NAMEMATERIALQUANTITYArt. 9471 Body EN10213 1.4408 12 End caps EN10213 1.4408 23 Seats PTFE + 15% G.F. 24 Ball CF8M/316 15 Stem SUS 316 16 Body seal PTFE 27 Gasket PTFE + 15% G.F. 18 Seal PTFE 19 Gland ring SUS 304 210 Belleville spring washer SUS 301 2DN AB C DSW d1 d2 QANSI PN16 PN40 ANSI PN16 PN40 ANSI PN16 PN4015 16 35 45 45 66,5 65 65 95 95 95 9 6 6 820 20 43 58 58 82,5 75 75 117 105 105 9 6 6 825 24,5 51 68 68 89 85 85 124 115 115 11 6 7 1232 32 64 78 78 98,5 100 100 133 140 140 11 6 7 1240 38 73 88 88 114,3 110 110 155 150 150 14 7 9 14,350 50 92 102 102 127 125 125 165 165 165 14 7 9 14,365 65 105 122 122 149,3 145 145 190 185 185 17 9 11 17,180 80 127 138 138 168 160 160 209 200 200 17 9 11 17,1100 100 157 158 160 200 180 190 254 220 235 17 9 11 17,1ITEM PART NAME MATERIAL QUANTITY11 Handle SUS 304 112 Lever nut SUS 304 113 Stop screw SUS 304 114 Plastic coating PVC 115 Bolts SUS 304 4 / 616 Spring washer SUS 304 8 / 1217 Bolts nut SUS 304 8 / 1218 O -ring VITON 1 / 219 Locking tab SUS 304 120 Static device SUS 316 221 Spring SUS 316 218191234567811 1210914151617AEKLIGB DCHXNQ 202113d2J1JSWd1DN EG I H × NKLJ J1ANSI PN16 PN40 ANSI DIN ANSI PN16 PN40 ANSI DIN15 42,3 14,2 14 16 1,6 2 16 × 4 14 × 4 14 × 4 25,2 139,7 130 36 4220 44,8 15,7 16 18 1,6 2 19 × 4 14 × 4 14 × 4 27,2 152,4 150 36 4225 54 17,5 16 18 1,6 2 19 × 4 14 × 4 14 × 4 33 165,1 160 42 5032 59,2 19 16 18 1,6 2 19 × 4 18 × 4 18 × 4 41,2 177,8 180 42 5040 73,5 20,5 16 18 1,6 3 22 × 4 18 × 4 18 × 4 49,3 190,5 200 50 7050 82,9 22,5 18 20 1,6 3 19 × 8 18 × 4 18 × 4 63,6 215,9 230 50 7065 107 25,4 18 22 1,6 3 22 × 8 18 × 4 18 × 8 82,1 241,3 290 70 10280 117 28,4 20 24 1,6 3 22 × 8 18 × 8 18 × 8 95,8 282,4 310 70 102100 132 31,8 20 24 1,6 3 22 × 8 18 × 8 18 × 8 117,8 304,8 350 70 102www.abovalve.comabovalve@abovalve.comDimensions in mm. Permissible deviations ± 2 mm.Bigger DN upon request.Dimensions in mm. Permissible deviations ± 2 mm.Stainless steel ball valve:• 2-pieces with ISO fl anges• Flanged connection• PN 40• Flange accommodation: EN 1092*Stainless steel ball valve:• 3-pieces with ISO fl anges• Flanged connection• PN 40• Flange accommodation: EN 1092*DN 15 20 25 32 40 50Nm 4,12 4,22 6,37 12,55 16,37 21,76Note: The torque fi gures were measured under 0 pressure at room temperature (without safety factor).OPERATING TORQUESDN 15 20 25 32 40 50 65 80 100Nm 3,73 5,10 6,57 9,61 16,47 32,16 61,76 78,43 132,35Note: The torque fi gures were measured under 0 pressure at roomtemperature (without safety factor).OPERATING TORQUESITEM PART NAMEMATERIALQUANTITYArt. 9461 Body EN10213 1.4408 12 Ends cup EN10213 1.4408 13 Seats PTFE + 15% G.F. 24 Ball EN10213 1.4408 15 Stem EN10213 1.4408 16 Body seal PTFE / GRAPHITE 17 Gasket PTFE + 15% G.F. 18 Seal PTFE / GRAPHITE 19 O - ring VITON 1 - 210 Gland ring SUS 304 211 Elleville spring washer SUS 301 212 Handle SUS 304 113 Lever nut SUS 304 214 Stop screw SUS 304 115 Plastic coating VINYL 116 Looking tab SUS 304 117 Spring SUS 316 118 Static device SUS 316 119 Bolts A2-70 4 - 6*(ANSI / ASME B16.5 upon request)*(ANSI / ASME B16.5 upon request)Data subject to change.Company HQ – Czech Republic:ABO valve, s.r.o.Dalimilova 285/54, 783 35 OlomoucTel: +420 585 202 226, +420 585 224 087Email: export@abovalve.comwww.abovalve.comRussia:ABO ARMATURA Ltd.SmolenskTel: +7 4812 31 28 27Email: aboarmatura@yandex.ruwww.aboarmatura.ruSingapore:ABO Asia & Pacifi c Pte. Ltd.SingaporeTel: +65 9728 2441Email: sales@abovalve.com.sgwww.abovalve.com.sgSlovakia:ABO Slovakia, s.r.o.Banská BystricaTel: +421 484 145 633Email: aboslovakia@aboslovakia.skwww.aboslovakia.skBrazil:ABO BrasilSimões Filho - SalvadorTel: +55-71-8787-4599Email: bernardo@abovalve.comwww.abovalve.comACTUATORSELECTRIC ACTUATOR ART. SM500 2“ ½ - 3“ – 4“ • Voltage: 24VAC – 230 VAC • Operating time: 0 – 90°: 60 sec – 150 sec • Operating torque: 38 Nm – 100 Nm • Protection enclosure: IP 65 • Working temperature: -10°C + 55°CPNEUMATIC ACTUATORS ABO SERIES 95Design: • Single acting • Double actingStandard angles: • Rotation 90°, 120°, 180° and 240°. Customized angles available as well as three position versions.Stroke adjustment: • GTW type: 0°-Position from -25° to +5°, 90°-Position from -5° to +5° • GTK, GTX type: 90°-Position from -5° to +5°Torques: • 5 - 8000 NmTemperature range: • Standard: From -50°C to +70°C (NBR) • Special version: From -15°C to + 160°C (Viton) or -30° to +200° (Silicone)ELECTRIC PART-TURN ACTUATOR SP 0.1 • Max. load torque: 50 Nm • Operating time: 10 - 160 (s/90°) • Operating angle: 60° - 360° • Working temperature: -25°C + 55°C • Protection enclosure: IP 65 / IP 67 • Operating position: any position • Weight: 3,2 kg - 5,2 kgELECTRIC PART-TURN ACTUATOR SP 1 • Max. load torque: 80 Nm • Switching-off torque: 90 Nm • Operating time: 10 - 80 (s/90°) • Operating angle: 60° - 360° • Working temperature: -25°C + 55°C • Protection enclosure: IP 65 / IP 67 • Operating position: any position • Weight: 6,5 kg – 8,3 kgNotice: The information in this brochure is indicative only.Binding specifi cation will be provided in the offer.ABO valve accepts no liability for damages caused by bad interpretation or use of the information included in this brochure.