BAMOPHOX - 216 - Data Monitor – Data Recorder - Brochure

Data monitor – Data recorderBAMOPHOX 216RE216-01/131-10-2011 216 I1 01 A216- Alphanumeric back lighted LCD display - Parameters and programming: - Input sensor signal, scale - Measuring range - Displayed unit (m, cm, %, ppm, mg, g)- Scale from 0,001 to 9999 - Wall mounting IP 65 or panel mounting - 3 relay outputs, 2 analogical outputs 4-20mA - 1 alarm output on over-rangingand temperature - OPTIONS:- Built in data logger (on MMC card) - RS 422 Interfacing, J-BUS protocol - Extension for 2nd measurement input DESCRIPTIONThe BAMOPHOX 216 offers high flexibility on use mixing different built-inprogrammes for regulation, thresholds, temperature compensation, andalarms. The 2 lines back lighted display, 16 alphanumerical characters,provides an easy measurement and temperature reading in any conditions. Italso displays the configuration menu and settings of thresholds, analogicaloutputs and operation data modes. To allow a quick and easy diagnostic after configuration a simulationprogram is built-in with direct actuation on contacts outputs and analogicaloutputs. A copy of the signal is available on the 4-20 mA output; it is galvanicinsulated; it can be set up within the complete measuring range.Temperature measurement is also available on a 4-20 mA output. EXTENSION TERMINALAn extension terminal (wall or panel mounting):- Allows a second measurement parameter (pH, Flow, Conductivity, etc.)- Data from this blind device are displayed on the main device (second line display). - A 4 wires shielded cable is used to link both devices (longest length is 500m)- The options RS422 and the data logger are shared between both BAMOPHOX.- May be fitted inside a cabinet on a rail DIN. Data monitor – Data recorderBAMOPHOX 216Wall mountig (main device)DIN Rail mounting(extension)Main device+ extension(Example: pH)=Panel mounting (main device)Maximum cable length: 500 meterorData monitor – Data recorderBAMOPHOX 216RE216-01/231-10-2011 216 I1 01 A216TECHNICAL FEATURESDisplayed parameters: Measurement values - Configuration Menu - Temperature valueDisplay: Back lighted - 2 lines of 16 alphanumerical characters ; 9.2 mm highIndication: LED alarms statusProgramming: 8 push buttons keyboard on front face - Keyword protectedMeasuring rangeUnit: m, cm, %, ppm, mg, g, [none] Scale: ranging through 4 digits from 0.001 to 9999, sliding decimal point Input signal: 4-20 mA Temperature sensor input: Pt 100 O /0°C, range -20 …+160°C Relay outputs: 4 closing contacts (Silver alloy), voltage freeThresholds: 3 programmable independent thresholds - with adjustable hysteresis 0…100% - and adjustable timer from 0 to 9999 s Switching power: 250 V AC / 3 A , 30 V DC / 3 A Switching capacity: 100 mA, 5 V DC (minimum) 4th relay output (S4): Alarm Measurement output: 0/4-20 mA (maxi 600 O), galvanic insulatedTemperature output: 0/4-20 mA (max 600 O), scalable, galvanic insulated Main power supply: 230 V AC / 50-60 Hz [other on request] - Consumption 10 VAModels: Panel mounting, IP65, 72 x 144 mm, connections on screw terminal IP40Idem DIN Rail mounting, only for blind monitorWall mounting, IP65, cable glands, connections on screw terminalOPTION (RS422+ Logger)Communication: RS422 output, J-BUS link, binary slave mode, 2400 to 9600 baudsData Logger: Cycle average measurement record, with a programmable period, 150000 records maxi on MMC (multi-media-card) / External driver necessary CE Mark: According to EC directives (72/23/EEC) and EMV Guidelines: RL 89/336/EEC DIMENSIONSCODE NUMBERS AND REFERENCESCode Reference Description 216 000 BAMOPHOX 216 E Panel mounting 72 x 144 - IP 65 front panel - screw terminal IP40216 001 BAMOPHOX 216 E/A Panel mounting 72 x 144 / Extension blind monitor - screw terminal IP40216 003 BAMOPHOX 216 D/A DIN Rail mounting / Extension, blind monitor - screw terminal IP40216 050 BAMOPHOX 216 E LOG BUS Panel mounting 72 x 144 / RS422 + logger - IP 65 front panel - screw terminal IP40216 100 BAMOPHOX 216 M Wall mounting - IP 65 - cable glands, connections on screw terminal216 101 BAMOPHOX 216 M/A Wall mounting - IP 65 / Extension, blind monitor - cable glands, connections on screw terminal216 150 BAMOPHOX 216 M LOG BUS Wall mounting - IP 65 / RS 422 + LOGGER - cable glands, connections on screw terminalExtension terminal:identical to the panelor wall mountingBAMOPHOXWall mounting instrumentPanel mounting instrumentPANEL