Basic Multimeter Fluke 113- Brochure

Technical DataFluke 113Basic MultimeterFeatures include:• VCHEK™ LoZ low impedance measurement function to simultaneously test for voltage and continuity• True-rms for accurate ac measurements on non-linear loads• A large backlit display allows for easy visibility in low-lit areas• Record signal fluctuations using the Min/Max function• Diode test for testing general-purpose germanium, silicon, and power diodes • Integral holster with probe holders for easy storage• Auto and Manual ranging for added user functionality• Meets Measurement Category CAT III 600 V and Category IV 300 V standards for a higher level of safety• The optional TPAK magnetic hanger allows the user hands-free flexibilityTrue RMS Basic Multimeter designed for basic electrical testsThe new 113 Basic Multimeter has the features needed to repair most electrical problems. This meter is simple to use and has significant improvements over Fluke’s original 7-600, and other utility multimeters. With features such as Fluke’s VCHEK™, added measurement functions, backlight, conformance to the latest safety standards, and a much larger display that’s easier to view, this new meter is a must have for the utility users toolbox.N10140Rhttp://instrumentation.bhd.ca/BHD CGYTypewritten Texthttp://instrumentation.bhd.ca/Specifications2 Fluke Corporation 113 Basic MeterFluke Corporation PO Box 9090, Everett, WA USA 98206Fluke Europe B.V. PO Box 1186, 5602 BD Eindhoven, The NetherlandsFor more information call: In the U.S.A. (800) 443-5853 or Fax (425) 446-5116 In Europe/M-East/Africa (31 40) 2 675 200 or Fax (31 40) 2 675 222 In Canada (800)-36-FLUKE or Fax (905) 890-6866 From other countries +1 (425) 446-5500 or Fax +1 (425) 446-5116 Web access: http://www.fluke.com©2008 Fluke Corporation. Specifications subject to change without notice. Printed in U.S.A. 3/2008 3292015 D-EN-N Rev AMaximum voltage between any terminal and earth ground600 VDisplay 3 3/4-digits, 6000 counts, updates 4/secOperating temperature -10 °C to 50 °C (14 °F to 122 °F)Storage temperature -40 °C to 60 °C (-22 °F to 140 °F)Temperature coefficient 0.1 x (specified accuracy)/°C (< 18 °C or > 28 °C)Operating altitude 2,000 mStorage altitude 10,000 mRelative humidity 95 % to 30 °C75 % to 40 °C45 % to 50 °CBattery type 9 Volt Alkaline, ANSI 1604A / IEC 6F22Battery life Alkaline: 300 hours typical, without backlightShock 1 Meter drop per IEC 61010-1-2001Vibration Per MIL-PRF-28800 for Class 2 instrumentSize (HxWxL) 167.1 mm X 85.1 mm X 46.0 mm (6.58 in X 3.35 in X 1.81 in) Weight 13.0 oz (404 g)Safety Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 No 61010-1-04, UL 61010-1 (2004) and IEC/EN 61010-1 2nd Edition for measurement Category III, 600 V, Pollution Degree 2, EMC EN61326-1EMI regulations Complies with FCC Part 15, Class BFluke. Keeping your world up and running.®Accuracy is specified for 1 year after calibration, at operating temperatures of 18 °C to 28 °C, with relative humidity at 0 % to 95 %. Accuracy specifications are given as follows:Note:Specifications are subject to change without notice.± ( [ % of reading ] + [ number of least significant digits ] )Function Range Resolution Accuracy DC, 45 to 500 Hz 500 Hz to 1 kHz Chek1,2 6.000 V 60.00 V 600.0 V0.001 V 0.01 V 0.1 V2.0 % + 3 4.0 % + 3Function Range Resolution Accuracy 3 2.000 V 0.001 V 2.0 % + 3 3 Beeper on < 20 ?, off > 250 ?; detects opens or shorts of 500 µs or longer ?3 600.0 ? 6.000 k? 60.00 k?0.1 ? 0.001 k? 0.01 k?0.9 % + 2 0.9 % + 1 0.9 % + 1 3 1000 nF 10.00 µF 100.0 µF 9999 µF1 nF 0.01 µF 0.1 µF 1 µF1.9 % + 2 1.9 % + 2 1.9 % + 2 100 µF - 1000 µF: 1.9 % + 2 > 1000 µF: 5 % + 20Notes:1 All Chek voltage ranges are specified from 60 counts to 100 % of range. Because inputs below 60 counts are not specified, it is possible and normal for this and other true-rms meters to display non-zero readings when the test leads are disconnected from a circuit or are shorted together.2 Crest factor of = 3 at 4000 counts, decreasing linearly to 1.5 at full scale.3 After measuring voltage, a wait time of 1 minute is required to maintain accuracy of ohms, capacitance, diode test, and continuity. Ordering informationFluke 113 Basic MeterIncludedFluke 113 Basic MultimeterTL75 Test LeadsOne 9V BatteryPrinted Users ManualFunction Input Impedance (Nominal) Chek ~3 k? < 300 pFCommon Mode Rejection Ratio (1 k? Unbalanced) > 60 dB at dc, 50 or 60 HzOpen Circuit Test Voltage Full Scale Voltage? < 2.7 V dc < 0.7 V dc< 2.7 V dc 2.000 V dcShort Circuit Current? < 350 µA< 1.0 mAhttp://instrumentation.bhd.ca/Visit WebsiteBHD CGYTypewritten Texthttp://instrumentation.bhd.ca/BHD CGYTypewritten TextVisit Website