BeanDevice® ONE-BN: Wireless pulse data logger

//APPLICATIONS// main featuresBeanDevice® ONE-BN main presentation videofeatured video2-channel digital inputs with noise filtering (software configurable)Watertight IP67 polycarbonate enclosureWeight : 120g, Size (Lxlxh) : 119x35x35mmPrimary cell capacity: 1800 mAh (AA size)Lithium-thionyl chloride technologyWireless PULSE data logger / low cost & small size//Wireless PULSE DATA LOGGER ONE-bn version//low cost & small sizeOPC server allowing real time access from your IT system to the BeanScape® (available on BeanScape® Premium+)«rethinking sensing technology»Embedded data logger : up to 1 million data pointsUltra-low power technology IEEE 802.15.4 (up to 7-year battery life) Max wireless range: 300m (L.O.S.)Pulse counter functionENERGY METERING(GAS, WATER, ELECTRIC)PROCESS CONTROL TECHNICAL BUILDINGMANAGEMENTLOGISTICS BINARY SENSOR & LIMIT SWITCH INTERFACINGBeanDevice® EcoSensor Products Line user manualUser Manual 11,9 cm3,5 cm3,5 cm120g//embedded data logger up to 1 million data pointsThe BeanDevice® ONE-BN integrates an embedded Data Logger, which can be used to log data when a Wireless Sensor Networks can not be easily deployed on your site. All the data acquisition are stored on the embedded flash and then transmitted to the BeanGateway® when a Wireless Sensor Networks is established. The dataLogger function is compatible with all the data acquisition mode available on your BeanDevice® ONE-BN : • LowDutyCycle Data Acquisition• Alarm• SurveyEXAMPLE : ENERGY METERING• In standalone operation, the BeanDevice® ONE-BN stores all the measurements on its datalogger. Thus,a direct connection with the BeanGateway® is not needed. • When the Energy meter starts counting, the pulse values are stored on the embedded flash.• Data logs can be transmitted to the BeanGateway® on request. Once a successful transmission is done, the user can choose to erase automatically the logs from the datalogger memory, so new ones can be stored.For further informations about the Datalogger, please read the following technical note : TN_RF_007 – “BeanDevice® DataLogger User Guide ”«rethinking sensing technology»//Wireless PULSE DATA LOGGER ONE-bn version//low cost & small size//remote configuration & monitoringBeanScape® BasicThe BeanScape® application allows the user to view all the data transmitted by the BeanDevice® ONE-BN. With the OTAC (Over-the-Air configuration) function, the user can remotely configure the BeanDevice® ONE-BN.DATA ACQUISITION MODESFor further informations about the data acquisition modes, please read the following technical note :TN_RF_008 – “Data acquisition mode available on the BeanDevice®”«rethinking sensing technology»//Wireless PULSE DATA LOGGER ONE-bn version//low cost & small sizeBeanScape ® Premium+ Add-onThe BeanScape® Premium+ integrates an OPC DA server (Data Access). OPC DA is particularly well suited for real time measurement and data sharing. Each data/measurement can be associated to a tag or its attributes and shared with one or many OPC clients.• Low Duty Cycle Data Acquisition mode (LDCDA) : the data acquisition is immediately transmitted by radio. The transmission frequency can be configured from 1s to 24h.• Alarm Mode : the measured value is trans-mitted by radio whenever an alarm threshold (fixed by the user) is detected (4 alarm thresh-old levels High/Low).• Survey Mode : operates like the Alarm mode but the device sends frequently a beacon frame informing its current status.«rethinking sensing technology»//Wireless PULSE DATA LOGGER ONE-bn version//low cost & small sizeProduct ReferenceBND-ONE-BN – WPWP – Wireless ProtocolIEEE : IEEE 802.15.4 (2006)Example : BND-ONE-BN-IEEE, IEEE 802.15.4 wireless technology3-channel digital input specificationMeasurement range 0-24V (Low level Input : 0 - 0.4V / High Level : 2.3V - 5V)Number of digital inputs 2Sensor power supply 3.3 Volts or 5 Volts @ 35 mASensor Acquisition features oneach independant channelAcquisition Mode Binary Pulse CounterFilter 0 - 500 ms (Resolution 1 ms)0 - 500 ms (Resolution 1 ms)Max. Input Frequency 1 Hz 40 Hz (Sleep Power Mode) fora square signal500 Hz (Active Power Mode)Alarm Configuration Alarm On Edge (channelindependant)Alarm On Patterns (multi-channels detection)Alarm on Counter ValueMiscellaneous N.A Count Edges : Rising /Falling / BothIncreasing / DecreasingcounterMeasurement Range : 0 -16777215RF SpecificationsWireless Protocol Stack IEEE 802.15.4 (2006 version)WSN Topology Point-to-Point / StarData rate 250 Kbits/sRF Characteristics ISM 2.4GHz – 16 ChannelsTX Power -7 dBm to +18 dBmReceiver Sensitivity -95.5 dBm to -104 dBmMax. Radio Range 300 m (L.O.S)Antenna Omndirectional antenna 2.2dBiOver-the-air configuration (OTAC) parametersData Acquisition mode Low Duty Cycle Data Acquisition (LDCDA) Mode: 1s to 24 hourAlarm & Survey mode: 1s to 24 hourAlarm Threshold 2 high levels alarms & 2 low levels alarmsPower Mode Sleeping, Sleeping with Network Listening & ActiveTX Power 5 dBm/ +11 dBm/ +15dBm/ +18 dBmBinary/Pulse counterspecificationCf. Digital input table«rethinking sensing technology»//Wireless PULSE DATA LOGGER ONE-bn version//low cost & small size//GETTING STARTED WITH A WIRELESS SENSOR NETWORKDESCRIPTION STARTERKIT REFERENCEStarterkit with BeanDevice® ONE-BN + BeanGateway® Indoor 1 x BeanGateway Ethernet (Indoor version), Ref. : BGTW-ETH-IND 1 x BeanDevice ONE-BN, Ref. : BND-ONE-BN 1 x Beanscape Basic, Ref. : BNSC_BASICStarterkit with BeanDevice® ONE-BN + BeanGateway® Outdoor 1 x BeanGateway Ethernet (Outdoor version), Ref. : BGTW-ETH-OUT 1 x BeanDevice ONE-BN , Ref. : BND-ONE-BN 1 x Beanscape Basic, Ref. : BNSC_BASICSK_ONE_BN_INDSK_ONE_BN_OUTEmbedded data loggerStorage capacity up to 1 000 000 data pointsWireless data downloading 3 minutes to download the full memory (average time)Environmental and MechanicalEnclosure Polycarbonate, Watertight IP67 | Nema 6 – Fire Protection : ULV94Enclosure dimensions (Lxlxh) : 119 mm x 35 mm x 35 mmWeight (battery included): 120gOperating Temperature -40°C to +75°CNorms FCC & CE compliantROHS - Directive 2002/95/ECPower supplyCurrent consumption @3.3 Volts · During data acquisition : 20 to 30 mA· During Radio transmission : 40 mA @ 5dBm , 70 mA @ 18 dBm· During sleeping : < 10 µAIncluded primary cell Lithium-thionyl chloride battery with 1800 mAh capacity (AA size)Choose an ultra low power wireless sensorRF transmissionin minutesBattery life (temperature room 25°C)Every 2 minutes 22 monthsEvery 5 minutes 51 monthsEvery 10 minutes 102 monthsProduct specifications are subject to change without notice. Contact Beanair for latest specifications. «rethinking sensing technology»//Wireless PULSE DATA LOGGER ONE-bn version//low cost & small sizeThe BeanDevice® ONE-BN operates only on our Wireless Sensor Networks , you will need the BeanGateway® and the BeanScape® for starting a wireless sensor network.sales@beanair.comVisit our website : www.beanair.comVisit our blog : www.industrial-wsn.comFOR MORE INFORMATIONS :OUR YOUTUBE CHANNEL :Watch our featured videos on YoutubeVISIT OUR WEBSITESVISIT US //contact us«rethinking sensing technology»//Wireless PULSE DATA LOGGER ONE-bn version//low cost & small size