Beta Calibrators - 330-300E - Pressure Calibrators Brochure

Calibration Technology Starts HereThe BetaGauge 330 is a revolution in pressure calibration technology for the process industries. With the 330, technicians have a small, lightweight calibrator that generatesfrom high vacuum to 300 PSI using a high performance integral electric pump.Gone is the drudgery of manual pumping or using large, heavy and unwieldy boxes with limited portability and poor battery life.The BetaGauge 330 has a form factor only slightly larger than Martel’s popular BetaGauge 321 and weighs in at a mere 2.5 pounds. The housing is contoured to easily fit a technician’s hand with good balance top to bottom.Performance doesn’t stop with the pump. The BetaGauge 330 provides ±0.035% of full scale accuracy on its internal, isolated pressure sensor. Temperature compensation on its internal sensor ensures accuracy in field applications. An externalpressure module connection supports all 29 ranges of BetaPort-P pressure modules for even greater measurement capability.A Pt100 RTD input is provided for temperature measurements accurate to ±0.1 °C (0.2 °F). In addition, theBetaGauge 330 measures and simulates 4-20 mA loop current signals. It can measure up to 30 VDC.An internal 24 VDC Instrument Power Supply supplies power to a transmitter under test.Like its calibrator siblings, the 330 displays up to 3 calibration values at one time from the choice of internal pressure sensor, external pressure sensor, temperature from the optional RTD probe or electrical (mA or VDC).The display is a large back lit graphics style LCD that’s easy to read in any lighting condition.Continued on back.General Features. Integrated internal electrically operated pneumatic pump: generates pressure to 300 PSI and vacuum to -12 PSI(-0.8 to 20 Bar, -80 to 2000 kPa). Accuracy of 0.035% FS. Small rugged compact design operates on eight (8) standard Alkaline AA batteries- Only 8” high x 4” wide x 2-3/8” deep (20 cm x 10 cm x 6 cm)- Lightweight at just 2.5 pounds (1.2 kg). External pressure module interface supports all BetaPort-P pressure modules (requires optional BPPA-100 module adapter). Pt100 RTD input for temperature measurement, accurate to 0.2°F (0.1°C) (measurement only) . 24 V loop power to power device under test. Store and recall 5 user defined setups. Clearbrite LCD with backlight can be configured to displayup to 3 variables displayed simultaneously (user controlled). Ideal for gas custody transfer flow meter applications. Pressure displayed in the user’s choice of 15 engineering units. Switch test is automatic using internal sensor or external pressure module. IP51 Rated. Percent error functionFor more information:- Call us toll free at 800-821-0023 or 603-434-1433- Fax us at 603-434-1653- Email us at sales@martelcorp.comand ask for a BetaGauge 330 Pressure brochure- Or go to our website, www.martelcalibrators.com and click on BetaGauge 330Handheld Pressure Calibration with Integral Electric Pressure Pump BetaGauge 330PatentPending-NEW-300 PSI ElectricTheREVOLUTIONCONTINUESBetaGauge 330300eSpecificationsRangesAvailable Pressure PSIG: -12 to 30 PSI /-0.8 to 2 bar-12 to 150 PSI /-0.8 to 10 bar-12 to 300 PSI / -0.8 to 20 barPSIA: 0 to 30 PSIA /0 to 2 bar A0 to 150 PSIA /0 to 10 bar A mA 0 to 24 mA, max, load 1000 OhmsRTD Pt100-385, -40 to 150°CEngineering Units psi, bar, mbar, kPa, MPa, kg/cm2, cmH2O@4°C, cmH2O@20°C, mmH2O@4°C, mmH2O@20°C, mmHg@0°C, inH2O@4°C, inH2O@20°C, inH2O@60°F, inHg@0°CInstrument Power Supply 24 VDC at 24 mAAccuracyPressure ±0.035% of full scale on internal sensor module dependent for external sensorsAdd 0.002% FS/°C outside of 15 to 35°CmA ±0.015% of reading ± 2 counts (simulation and measurement)Volts ±0.015% of reading ± 2 counts (measurement only)Temperature ±0.1°C (0.2°F) (measurement only) (Pt100 RTD)GeneralIntegrated internal electrically operated pneumatic pump:generates -12 PSI to 300 PSI pressure (-0.8 to 20 Bar, -80 to 2000 kPa)Environmental Operating Temperature -10 °C to +50 °C Storage Temperature -20 °C to +60 °CPower Requirements Battery Eight (8) standard Alkaline AA batteriesBattery Life 100 pump cycles to 300 PSI minimum1000 pump cycles to 30 PSIPhysical Dimensions 8” high x 4” wide x 2-3/8” deep (20 cm x 10 cm x 6 cm) Weight 2.5 pounds (1.2 kg)ConnectionsPressure: 1/8” female NPT - Stainless SteelElectrical: standard banana jacksRTD: 4 pin LEMO styleExternal module: 6 pin LEMO styleIncluded Accessories - NIST traceable calibration certificate,batteries installed, test leads, test hose, fittings, user guide, carrying case.Martel Electronics Corporation3 Corporate Park Drive, Unit 1Derry, NH 03038Phone: +1 (603) 434-1433Fax: +1 (603) 434-1653Copyright 2012 Martel Electronics;All trademarks are the property of their respective owners. 0807R2CD-330BetaGauge 330BETAGAUGE 330 Hand HeldPressure Calibrator with Integral Electric Pressure PumpThe new BetaGauge 330 Pressure Calibrator provides a number of convenience features.Switch test can be performed on internal or external pressure input. Percent (%) Error anddamping functions are provided. Up to five frequently used setups can be stored andretrieved with one button recall.The compact, rugged design operates oneight (8) standard AA Alkaline batter-ies. Due to the power saving designsincorporated in the BetaGauge 330,it can perform approximately 300calibration cycles to 150 PSI onone set of batteries or 100cycles to 300 PSI.The 330 comes in 5 ranges of30 PSI, 150 PSI and 300 PSIgauge and 30 PSI and 150PSI absolute. Like all Martel calibrators, the BetaGauge 330 comes from the factory ready to go to work with batteries installed, NIST traceable calibration certificate, test leads,connection hose, fittings, deluxe carrying case and user manual.Distributed by:BetaGauge 330 Ordering InformationPart Number Description1919793 BetaGauge 330-30, 30 psi/2 bar internal range, battery operated internal pump1919782 BetaGauge 330-150, 150 psi/10 bar internal range, battery operated internal pump1919919 BetaGauge 330-300, 300 psi/20 bar internal range, battery operated internal pump1919882 BetaGauge 330-30A, 30 psi/2 bar ABSOLUTE internalrange, battery operated internal pump1919883 BetaGauge 330-150A, 150 psi/10 bar ABSOLUTE internal range, battery operated internal pumpAll units above include• LDT-500 liquid/dirt trap• Batteries• Test leads• Test hose & fittings• NIST traceable calibration certificate• User guide• Deluxe soft sided carrying caseCustody Transfer Calibration Kits1919795 BetaGauge 330-30 as above with 1500 psi BetaPort-P external pressure module1919796 BetaGauge 330-30 as above with 3000 psi BetaPort-P external pressure module1919797 BetaGauge 330-30 as above, BetaPort-P external pressure module NOT INCLUDEDAll custody transfer calibration kits include• BPPA-100 pressure module adapter• LTP-100A 100O RTD probe