BioFLOW Membrane Skid Brochure

bioFLOW SKIDS BioFLOW Membrane Skid SI Units US Units Membrane Pore Size 0.03 microns Nominal flux 54 – 108 lmh 30 – 60 gfd Trans Membrane Pressure (TMP) 2.0 – 8.0 bar 29 – 116 psig Scouring Velocity 3.5 – 5.0 m/s 9.8 – 16.4 ft/s Nominal Power Consumption 2.2 – 7.0 kWh/m3 8.3 - 26.6 kWh/1000 gal Materials of Construction PVDF housed in CPVC or FRP casings The bioFLOW concept is a pressure driven filtration process, which physically separates solutions and dispersions into concentrates and permeates. The wastewater is separated as it circulates across the membrane module at a high velocity. Permeate is forced through the pores of the membrane, while suspended particulate remains in the return stream. Cross-flow filtration creates high turbulence on the membrane surface and prevents the accumulation of particles on the inner surfaces of the tubular membrane, providing high flux and prolonged membrane life. A CLARCOR Company www.bioprocessH2O.com | Tel. 401.683.5400 45 Highpoint Avenue | Portsmouth, Rhode Island 02871 BioFLOW Membrane Skid BioFLOW External MBR Systems • Optimized for high-strength industrial wastewater • Excellent anti-fouling behavior • High chemical resistance and excellent pressure stability • Durable, with long life expectancy • Flexible CIP capabilities • Self-contained and externally mounted – no separate tank is needed • Fully automated and scalable to all size facilities • High flux rates and low membrane plugging or clogging risk • Custom pilot units determine specific flux capabilities • Feed-and-bleed or direct recirculation units available