bioPULSE - 10D - Airlift External MBR Systems Brochure

BioPULSE™ Airlift Membrane Skid SI Units US Units Skid Dimensions (l x w x h) 2.3m x 1.6m x 4.6m 7.5ft x 5.25ft x 15ft Nominal Surface Area 330 m2 3,550 ft2 Membrane Pore Size 0.03 microns Nominal flux 45 – 65 lmh 25 – 40 gsfd Trans Membrane Pressure (TMP) 0.05 – 0.3 bar 0.75 – 4.4 psig Nominal Power Consumption 0.25- 0.35 kWh/m3 0.95 -1.30 kWh/1000 gal Materials of Construction PVDF housed in PVC casings The bioPULSE™ Airlift External MBR systems are highly efficient and compact membrane systems that can be applied to both existing and “new build” biological treatment systems. Within each vertically mounted tubular membrane module, the wastewater is air-lifted through the modules via a dedicated air diffuser that is integral to each membrane in order to maximize the flux potential of the membrane process. Due to the high velocity air lift, the membranes are continuously air scoured to sustain higher flux values for extended periods of time minimizing “clean-in-place” (CIP) chemical cleaning processes. As a result, the Airlift MBR flux is nearly twice that of “in basin” MBR membrane technologies. The TMP requirements for the bioPULSE™ Airlift is “ultra-low” resulting in lower energy consumption, attractive life cycle costs, and low “OPEX” operational expenses. A CLARCOR Company www.bioprocessH2O.com | Tel. 401.683.5400 45 Highpoint Avenue | Portsmouth, Rhode Island 02871 10D bioPULSE™ Membrane Skid BioPULSE™ Airlift External MBR Systems • Compact System Footprint • Ultra Low Energy Consumption • Low Chemical Consumption • Sustained High Membrane Flux • Easily Maintained Membrane Process • Simple Civil Works – Flat concrete slab • Operator Friendly