Blobel - Type BL/HTL-SB - Floodwater Barrier - Brochure

FLOODWATER BARRIERS – INFLOW PROTECTION ? Blobel Umwelttechnik GmbH – Blobel Environmental Engineering 23 2.1 Floodwater Barrier TYPE BL/HTL-SB Article Index: 321, 322, 323 Barrier, slide-insert Special design for mounting within the opening 2.1.1 Description Suitable for crack-free surfaces with ground/floor unevenness of up to 15 mm, e.g. concrete, corrugated sheet metal, tiles, stones, etc. The floodwater barrier consists of a hollow, aluminium body section with lower edge protection. A compressible, highly-adaptable special seal is applied to the bottom side. The floodwater barrier is rigidly installed universally mounted in two "U"-shaped mounting devices by way of preference within a door/gate opening, between walls, etc. and sealed against the building or structure. With a special version, mounting is also possible outside of the opening. Two rotating tensioning levers are mounted on the barrier body. With these, the necessary force can be applied in the guide rails and against the surface in order to lock and seal the unit and provide for a reliable seal. Wall mounts are included in the scope of delivery in order to provide for orderly storage. Steel components are galvanized. The aluminium barrier sections have a polished bare metal finish. Paint finish or powder coating upon request.Features: • Uncomplicated, ease in handling • Design-tested (LGA, Trade Supervision Department, Bavaria, Germany) as BL/BTL • Quality-controlled (Ing.-Büro Blobel, Friedberg, Germany) • Field-tested Dimensions: Article Index 321 322 323 Element height [mm] 150 200 300Standard length [mm] up to 2500 up to 2500 up to 2500Standard height [mm] 150 - 900 200 - 1200 300 – 1800Custom lengths upon request Custom heights upon request Width 50 mm FLOODWATER BARRIERS – INFLOW PROTECTION 24 ? Blobel Umwelttechnik GmbH – Blobel Environmental Engineering 2.1.2 Drawing – in front of the opening BL / HTL-SB (Floodwater barrier, rapid closure, stackable) Table of dimensions for specified dimension LBa (LBa = length of barrier, in front of the opening) H/50 Height H [mm] LWa [mm] 150 200 300 up to 2500 LBa = Lw + 2 x Z Sp 1 = 15 mm Z = 35 mm H = Element height HG = n x elements + n x 10 + 15 FLOODWATER BARRIERS – INFLOW PROTECTION ? Blobel Umwelttechnik GmbH – Blobel Environmental Engineering 25 2.1.3 Drawing – within the opening BL / HTL-SB (Floodwater barrier, rapid closure, stackable) Table of dimensions for specified dimension LBi (LBi = length of barrier, within the opening) H/50 Height H [mm] LWi [mm] 150 200 300 up to 2500 LBi = Lw - (2 x Sp 1) Sp 1 = 15 mm H = Element height HG = n x elements + n x 10 + 15 EuropeBlobel Umwelttechnik GmbHZiegeleistraße 586368 Gersthofen, GermanyTelephone: +49 (0)821 498190-0Telefax: +49 (0)821 498190-30email: info@blobel.deWeb: www.blobel.deNorth America / CanadaBLOBEL Environmental Engineering LLC270 Presidential DriveWilmington, Delaware 19807, USATelephone: +1 302-353-1555Telefax: +1 302-288-3753Mobile: +1-215-666-2267email: info@blobel.usWeb: www.blobel.comAsia / Pacific / South America Blobel Environmental Engineering6/41 Belgrave StreetSydney NSW 2024, AustraliaTelephone: +61 (0)2/93 69 35 04Mobile: +61 (0) 4 19 27 94 81email: mail@blobel.comWeb: www.blobel.com