Blobel - Type BL/HTL-TR - Floodwater Barrier - Brochure

FLOODWATER BARRIERS – INFLOW PROTECTION ? Blobel Umwelttechnik GmbH – Blobel Environmental Engineering 15 1.4 Floodwater barrier TYPE BL/HTL-TR Article Index: 315 Barrier, slide-insert Special design for installation within the opening Dimensions: Standard height 400 to 600 mm Special situations upon request Standard length up to 2000 mm Special situations upon request Width 50 mm 1.4.1 Description Suitable for crack-free surfaces with ground/floor unevenness of up to 15 mm, e.g. concrete, corrugated sheet metal, tiles, stones, etc. The floodwater barrier consists of a hollow, aluminium body section with lower edge protection. A compressible, highly-adaptable special seal is applied to the bottom side. The floodwater barrier is rigidly installed universally mounted in two "U"-shaped mounting devices by way of preference within a door/gate opening, between walls, etc. and sealed against the building or structure. With a special version, mounting is also possible outside of the opening. Two rotating tensioning levers with four engagement positions are mounted on the barrier body. With these, the necessary force can be applied in the guide rails and against the surface in order to lock and seal the unit and provide for a reliable seal. Wall mounts are included in the scope of delivery in order to provide for orderly storage. Steel components are galvanized. The aluminium barrier sections have a polished bare metal finish. Paint finish or powder coating upon request.Features: • Uncomplicated, ease in handling • Design-tested (LGA, Trade Supervision Department, Bavaria, Germany) as BL/BTL-TR • Quality-controlled (Ing.-Büro Blobel, Friedberg, Germany) • Field-tested FLOODWATER BARRIERS – INFLOW PROTECTION 16 ? Blobel Umwelttechnik GmbH – Blobel Environmental Engineering 1.4.2 Drawing – within the opening BL /HTL-TR (Floodwater barrier, rapid closure, slide-insert) Table of dimensions for specified dimension LBi (LBi = length of barrier, within opening) H / 50 Height H [mm] LWi [mm] 300 400 500 600 up to 2500 LBi = Lw - (2 x Sp 1) Sp 1 = 15 mm FLOODWATER BARRIERS – INFLOW PROTECTION ? Blobel Umwelttechnik GmbH – Blobel Environmental Engineering 17 1.4.3 Drawing – in front of the opening BL / HTL-TR (Floodwater barrier, inside door opening, slide-insert) Table of dimensions for specified dimension LBa (LBa = length of barrier, in front of the opening) H / 50 Height H [mm] LWa [mm] 300 400 500 600 up to 2500 LBa = LW + 2 Z Z = Ad measurement = 35 mm Sp 1 = 10 mm EuropeBlobel Umwelttechnik GmbHZiegeleistraße 586368 Gersthofen, GermanyTelephone: +49 (0)821 498190-0Telefax: +49 (0)821 498190-30email: info@blobel.deWeb: www.blobel.deNorth America / CanadaBLOBEL Environmental Engineering LLC270 Presidential DriveWilmington, Delaware 19807, USATelephone: +1 302-353-1555Telefax: +1 302-288-3753Mobile: +1-215-666-2267email: info@blobel.usWeb: www.blobel.comAsia / Pacific / South America Blobel Environmental Engineering6/41 Belgrave StreetSydney NSW 2024, AustraliaTelephone: +61 (0)2/93 69 35 04Mobile: +61 (0) 4 19 27 94 81email: mail@blobel.comWeb: www.blobel.com