Booster Pump HPI 4

Multiplier of pressure - HPI models Page 1/3 2006 – Neron International srl - Largo Delle Industrie, 21 -24020 - Torre Boldone - (BG) Italy - Tel.+39 035-4175399 Fax. +39 035-347024 1. MULTIPLIER OF PRESSURE - HPI MODELS MODELS HPI 4 HPI 5 TYPE Base CARACTERISTICS Regulation adjustable safety valve integrated in the manifold Oil temperature max 70 °C Risk none, safety valve installed Construction steel, aluminium, special material gaskets Pistons material steel Dimensions 230x130x115 mm Weight 9.0 kg Inlet and outlet oil nipple ½” BSP F Oil outlet nipple ½” BSP F Water outlet nipple ¼” BSP F ADVANTAGES • full power and trust • technologically unbeatable • provided of safety devices • easy and practice to use and to connect • very small dimensions • oil inlet port available on the body side • installation in any desired position • low noise and low vibrations • running in any environment conditions • nearly no maintenance required • no-comparable working life thanks to the oil self lubrication • for its own nature, anti explosive, anti spark, anti electric shock HPI PERFORMANCE MODEL HPI 4 HPI 5 Max oil inlet flow at P1 (l/m) 25 25 Flow ratio factor Q2/Q1 0.2 0.16 Max outlet flow at P2 (l/m) 4 5 To calculate the flow, multiply the oil flow by the flow ratio factor (e.g. 25 x 0,2 = 4) MODEL HPI 4 HPI 5 Max oil inlet pressure (bar) 200 180 Pressure ratio factor P2/P1 4 5 Max outlet pressure (bar) 800 900 To calculate the pressure, multiply the oil inlet pressure by the pressure ratio factor (e.g. 200 x 4 = 800) Multiplier of pressure - HPI models Page 2/3 2006 – Neron International srl - Largo Delle Industrie, 21 -24020 - Torre Boldone - (BG) Italy - Tel.+39 035-4175399 Fax. +39 035-347024 2. MAIN APPLICATIONS Hydraulic tools: rescue scissors, spreading tools, hydraulic high torque wrenches, rescue and lifting cylinders, tree scissors, pressing, caulking and tensioning tools. Hydrostatic pressing for sintering and production of ceramic parts. Hydraulic presses using increased pressure in the speed cycle and safe ultra-high pressure at low speed, thus allowing the higher load capacities of seals at low speed as well as allowing smaller and cheaper cylinders. Automation and production controlled cutting, contouring, shaping or removing of sharp edges. Blowing and expanding of pressure vessels production of metals bottles, twin-walled safety tanks or autoclaves, blowing rock bolts for ceiling support. Deformation of metals stretching of tanks or pipes, cold caulking of large rivets, assembling by deformation. Pressure and tightness checks for pressurising pipes, hoses, test rigs, pressure vessels and bottles. Re-railing, servicing and fire fighting vehicles to use hydraulic tools in case of road or rail accidents with working pressure from 500 to 700 bar. Safety cracking rocks and concrete to avoid explosions. Tensioning of steel bars within tensioned concrete. On hydraulic work platform to cut tree branches by means of hydraulic scissors to avoid the use of noisy and dangerous chain saws, to fasten large screws and nuts. Any tool for servicing and assembling devices working at ultra high pressure can be driven in the work platforms. Demolition scissors to cut old concrete reinforcements and pipes therein, cables into pieces to allow easy transportation, recycling and storage. With the Neròn pressure intensifier a pressure of 900 bar can be reached, no additional hydraulic control or circuits are required, no additional manual control is required, air bubble problems eliminated by continuous oil displacement, fully automatic pressure boost. Demolition spreading tools with integrated valve to allow the cylinder closing in a speedy way allowing the oil flow coming from the machine. On the drilling machines to pull, adjust, lift or move heavy material, operate rescue tools like hydraulic scissors or spreaders, for pressing, caulking and tensioning work, for hydraulic assemblage and disassembling by expansion tools. Cracking rocks by inserting expansion tools, tubes or hoses into holes drilled into rocks to replace dynamite blasting. On the excavators with high torque wrenches to fasten large nuts, to stretch steel bars within tensioned concrete, to cut steel with hydraulic scissors, to move and position large masses or weight, to repair at high height. On the trucks and pick-up trucks to use hydraulic tools for maintenance road works, rail works or site works. Multiplier of pressure - HPI models Page 3/3 2006 – Neron International srl - Largo Delle Industrie, 21 -24020 - Torre Boldone - (BG) Italy - Tel.+39 035-4175399 Fax. +39 035-347024 3. UTENSILI