Butterfly Valves - Brochure

Data sheet 010001 englisch (english)Edition 12/14 - Data subject to alteration - Regularly updated data on www.ari-armaturen.comARI-ZESA® / ARI-GESA®with notch lever Page 6ARI-ZESA® / ARI-GESA®with lock lever Variable adjustment (with 0 - 90° angle positioning)With variable adjustment••Page 6ARI-ZESA® / ARI-GESA®with worm gear With variable adjustmentSelf-locking••Page 6ARI-ZESA® / ARI-GESA®with electric rotary actuator ARI-OM For short time duty S 2-5 Min. (Periodic duty S3 30% ED)230V 50Hz, 24V DC, 24V 50Hz Enclosure IP 67••• Page 7ARI-ZESA® / ARI-GESA®with electric rotary actuator Deufra Type of operation, on/off S4 30% (or control S4 50%)230V 50Hz (400V 50Hz)Enclosure IP 67•••Page 8ARI-ZESA® / ARI-GESA®with electric rotary actuator Auma For short time duty S 2-15 Min. (or control S4 25%)400V 50Hz (230V 50Hz)Enclosure IP 68•••Page 9ARI-ZESA® / ARI-GESA®with pneumatic rotary actuator AIR-TORQUE / bar Function: Double acting Function: Single acting, Spring closes on air failure (opens)Actuating pressure 6 bar (=0,6 MPa)••• Page 10 / 11ARI-ZESA® / ARI-GESA®with integrated Thermo - Appliance Cold (-20 up to +40°C) or warm (0 up to +120°C)With LeverPrecision class 1,0•••Page 12ARI-ZESA® / ARI-GESA® / THEA®Butterfly valvesARI-ZESA® - Fig. 012 - Free of maintenance butterfly valve with elongated eyelets - soft sealedARI-GESA® - Fig. 013 - Free of maintenance butterfly valve with threaded eyelets - soft sealed Features: Soft sealingMaintenance-free Good flow characteristic due to excellent Zeta-valuesSeat materials EPDM / NBR / FPMDouble sealing of the stemStainless steel discComplete insulation possible according to the german „Energy saving order - EnEV“Dew point barrierCentrical disc bearingNodular iron body EPDM with DIN DVGW Reg. drinking water (DW6201BR0244)ARI-ZESA®: Wafer typeARI-GESA®: Lug typeAs a pipe-end valvePipeline one-side detachable•••••••••••••••Fig. 012 - ARI-ZESA®THEA® THErmo-ApplianceFig. 013 - ARI-GESA®2 Edition 12/14 - Data subject to alteration - Regularly updated data on www.ari-armaturen.comARI-ZESA® 012Technical dataButterfly valve with elongated eyelets (SG iron)Figure Nominal pressure Material Nominal diameter Disc Stem20.012 PN6 EN-JS1030 DN25-3001.45811.4021+QT (optional: = DN300 1.4571 / = DN350 1.4542)21.012 PN10 EN-JS1030 DN25-50022.012 PN16 EN-JS1030 DN25-500Seat:• EPDM -10 °C to +130 °C / NBR -10 °C to +80 °C / FPM 0 °C to +150 °C (not for hot water useable)Max. differential pressure:• 16 bar (DN25-150) / 10 bar (DN200-500)Actuation arrangement: (refer to page 6-11)• Notch lever / Lock lever / Worm gear • Electric actuator (ARI-OM, Deufra, Auma) / Pneumatic actuator (AIR-TORQUE, bar)Test:Sealing leakage test: • DIN EN 12266-1 Leakage rate A (DIN 3230 T3 Leakage rate 1)DVGW-Registration: • EPDM for water DW-6201BR0244, acc. to DIN EN 1074-1/-2 incl. desinfection inspection, DVGW VP646 and DVGW W270 for drinking waterPartsPos. Sp.p. Description Fig. 20. / 21. / 22.0121 Body EN-GJS-400-15, EN-JS10302 Seat EPDM 73 / NBR 73 / FPM 733 Disc GX5CrNiMoN19-11-2, 1.45814 Pivot X20Cr13+QT, 1.4021+QT (optional: = DN300 X6CrNiMoTi17 12 2, 1.4571 / = DN350 X5CrNiCuNb16-4, 1.4542)5 Stem X20Cr13+QT, 1.4021+QT (optional: = DN300 X6CrNiMoTi17 12 2, 1.4571 / = DN350 X5CrNiCuNb16-4, 1.4542)6 Taper pin X6CrNiMoTi17 12 2, 1.45718 x Insulating cap PA 69 x Gasket CU10 x Hexagon head screw plug 5.8-A2G11 x O-ring EPDM 73 / NBR 73 / FPM 73+ Spare partsInformation / restriction of technical rules need to be observed Operating and installation instructions can be downloaded at www.ari-armaturen.com. The engineer, designing a system or a plant, is responsible for the selection of the correct valve. Resistance and fitness must be verified (contact manufacturer for information, refer to Product overview and Resistance list).ConstructionsDN25-65 DN80-100DN125-150 DN200DN250-300 DN350-5003Edition 12/14 - Data subject to alteration - Regularly updated data on www.ari-armaturen.comARI-ZESA® 012Technical dataDN 25 32 40 50 65 80 100 125 150 200 250 300 350 400 500Face-to-face dimension FTF series 20 acc. to DIN EN 558-1L (mm) 33 33 33 43 46 46 52 56 56 60 68 78 78 102 127Dimensions H (mm) 128 128 134 140 150 158 179 196 212 246 273 302 358 407 495E (mm) 58 58 66 69 81 100 109 124 140 167 203 232 258 287 354l (mm) 15 15 15 15 15 15 15 18 18 18 24 24 26 42 42SW (mm) 11 11 11 11 11 11 11 17 17 17 22 22 22 30 30Kvs-value / Zeta-value Diagram refer to page 13.Kvs-value (m3/h) 26 26,5 49,6 116 259 377 763 1030 1790 3460 5070 7430 10320 13290 21180Zeta-value -- 0,93 2,4 1,7 0,75 0,43 0,46 0,27 0,37 0,25 0,21 0,24 0,23 0,23 0,23 0,22Standard-flange dimensions / Hexagon screw (Quantity, Thread, Length) PN6ØK (mm) 75 90 100 110 130 150 170 200 225 280 335 395-- on requestn x Ød1 (mm) 4x11 4x14 4x14 4x14 4x14 4x18 4x18 8x18 8x18 8x18 8x18 8x22Quantity (pcs.) 4 4 4 4 4 4 4 8 8 8 12 12Thread M10 M12 M12 M12 M12 M16 M16 M16 M16 M16 M16 M20Length (mm) 80 80 80 90 90 100 110 120 120 130 140 160PN10ØK (mm) 85 100 110 125 145 160 180 210 240 295 350 400 460 515 620n x Ød1 (mm) 4x18 4x18 4x18 4x18 4x18 4x18 4x18 8x18 8x22 8x22 8x22 8x22 4x22 4x28 4x28Quantity (pcs.) 4 4 4 4 4 8 8 8 8 8 12 12 16 16 20Thread M12 M16 M16 M16 M16 M16 M16 M16 M20 M20 M20 M20 M20 M24 M24Length (mm) 90 90 90 100 110 110 120 130 130 140 150 160 160 200 220PN16ØK (mm) 85 100 110 125 145 160 180 210 240 295 355 410 470 525 650n x Ød1 (mm) 4x14 4x18 4x18 4x18 4x18 8x18 8x18 8x18 8x22 12x22 12x26 12x26 16x26 16x30 20x33Quantity (pcs.) 4 4 4 4 4 8 8 8 8 12 12 12 16 16 20Thread M12 M16 M16 M16 M16 M16 M16 M16 M20 M20 M24 M24 M24 M27 M30Length (mm) 90 90 90 100 110 110 120 130 130 140 160 170 180 220 260WeightsFig. 20./21./22.012 (kg) 1,4 1,4 1,6 2 2,6 3,2 4 4,6 8,6 12,6 19,4 29,4 43,9 67,7 111Mounting variationsZESA®- Wafer-type-valveWelding neck flanges PN 6 / PN 10 / PN 16 DIN EN 1092-1 / 11 / B1 (for slip-on-flanges acc. to DIN EN 1092-1 use ZIVA)Hexagon screw DIN EN ISO 4016 W.-No. 4.6Hexagon nut DIN EN ISO 4034 W.-No. 5Pressure-temperature-ratings Intermediate values for max. permissible operational pressures can be determined by linear interpolation of the given temperature / pressure chart.acc. to DIN EN 1092-2 PN -10°C to 120°C 130°C 150°CEN-JS1030 16 (bar) 16 15,8 15,54 Edition 12/14 - Data subject to alteration - Regularly updated data on www.ari-armaturen.comARI-GESA® 013Technical dataButterfly valve with threaded eyelets (SG iron)Figure Nominal pressure Material Nominal diameter Disc Stem21.013 PN10 EN-JS1030 DN25-5001.45811.4021+QT (optional: = DN300 1.4571 / = DN350 1.4542)22.013 PN16 EN-JS1030 DN25-500Seat:• EPDM -10 °C to +130 °C / NBR -10 °C to +80 °C / FPM 0 °C to +150 °C (not for hot water useable)Max. differential pressure:• 16 bar (DN25-150) / 10 bar (DN200-500)Actuation arrangement: (refer to page 6-11)• Notch lever / Lock lever / Worm gear • Electric actuator (ARI-OM, Deufra, Auma) / Pneumatic actuator (AIR-TORQUE, bar)Test:Sealing leakage test: • DIN EN 12266-1 Leakage rate A (DIN 3230 T3 Leakage rate 1)DVGW-Registration: • EPDM for water DW-6201BR0244, acc. to DIN EN 1074-1/-2 incl. desinfection inspection, DVGW VP646 and DVGW W270 for drinking waterPartsPos. Sp.p. Description Fig. 21. / 22.0131 Body EN-GJS-400-15, EN-JS10302 Seat EPDM 73 / NBR 73 / FPM 733 Disc GX5CrNiMoN19-11-2, 1.45814 Pivot X20Cr13+QT, 1.4021+QT (optional: = DN300 X6CrNiMoTi17 12 2, 1.4571 / = DN350 X5CrNiCuNb16-4, 1.4542)5 Stem X20Cr13+QT, 1.4021+QT (optional: = DN300 X6CrNiMoTi17 12 2, 1.4571 / = DN350 X5CrNiCuNb16-4, 1.4542)6 Taper pin X6CrNiMoTi17 12 2, 1.45718 x Insulating cap PA 69 x Gasket CU10 x Hexagon head screw plug 5.8-A2G11 x O-ring EPDM 73 / NBR 73 / FPM 7314 Parallel bush P1+ Spare partsInformation / restriction of technical rules need to be observed Operating and installation instructions can be downloaded at www.ari-armaturen.com. The engineer, designing a system or a plant, is responsible for the selection of the correct valve. Resistance and fitness must be verified (contact manufacturer for information, refer to Product overview and Resistance list).ConstructionsDN25-65 DN80-150DN200 DN250-300DN350-5005Edition 12/14 - Data subject to alteration - Regularly updated data on www.ari-armaturen.comDN 25 32 40 50 65 80 100 125 150 200 250 300 350 400 500Face-to-face dimension FTF series 20 acc. to DIN EN 558-1L (mm) 33 33 33 43 46 46 52 56 56 60 68 78 78 102 127Dimensions H (mm) 128 128 134 140 150 158 179 196 212 246 273 302 358 407 495E (mm) 58 58 66 69 81 100 109 124 140 167 203 232 258 287 354l (mm) 15 15 15 15 15 15 15 18 18 18 24 24 26 42 42SW (mm) 11 11 11 11 11 11 11 17 17 17 22 22 22 30 30Kvs-value / Zeta-value Diagram refer to page 13.Kvs-value (m3/h) 26 26,5 49,6 116 259 377 763 1030 1790 3460 5070 7430 10320 13290 21180Zeta-value -- 0,93 2,4 1,7 0,75 0,43 0,46 0,27 0,37 0,25 0,21 0,24 0,23 0,23 0,23 0,22Standard-flange dimensions / Hexagon screw (Quantity, Thread, Length) PN10ØK (mm) 85 100 110 125 145 160 180 210 240 295 350 400 460 515 620n x M (mm) 4xM12 4xM16 4xM16 4xM16 4xM16 8xM16 8xM16 8xM16 8xM20 8xM20 12xM20 12xM20 16xM20 16xM24 20xM24Quantity (pcs.) 8 8 8 8 8 16 16 16 16 16 24 24 32 32 40Thread M12 M16 M16 M16 M16 M16 M16 M16 M20 M20 M20 M20 M20 M24 M24Length (mm) 30 30 30 35 35 40 40 45 45 50 55 55 60 70 85PN16ØK (mm) 85 100 110 125 145 160 180 210 240 295 355 410 470 525 650n x Ød1 (mm) 4xM12 4xM16 4xM16 4xM16 4xM16 8xM16 8xM16 8xM16 8xM20 12xM20 12xM24 12xM24 16xM24 16xM27 20xM30Quantity (pcs.) 8 8 8 8 8 16 16 16 16 24 24 24 32 32 40Thread M12 M16 M16 M16 M16 M16 M16 M16 M20 M20 M24 M24 M24 M27 M30Length (mm) 30 30 30 35 35 40 40 45 45 50 55 60 60 75 100WeightsFig. 20./21./22.013 (kg) 1,8 1,8 2 2,8 3,2 4,8 6,2 8,8 11 15,6 24,8 36 55,6 85 146Mounting variationsGESA®- Wafer-type-valveWelding neck flanges PN 10 / PN 16 DIN EN 1092-1 / 11 / B1(for slip-on-flanges acc. to DIN EN 1092-1 use ZIVA)Hexagon screw DIN EN ISO 4016 W.-No. 4.6GESA®- Pipe-end-valveWelding neck flanges PN 10 / PN 16 DIN EN 1092-1 / 11 / B1(for slip-on-flanges acc. to DIN EN 1092-1 use ZIVA)Hexagon screw DIN EN ISO 4016 W.-No. 4.6When used on end of line applications, a safety precaution (blind flange, etc.) is recommended.To ensure the seat tightness, a blind or counter flange is necessary.The installation between deviating flanges is not or only under special care possible. Please consult us.For all installation, modification or maintenance work, please observe regulations in force and the ARI-operating instructions.Pressure-temperature-ratings Intermediate values for max. permissible operational pressures can be determined by linear interpolation of the given temperature / pressure chart.acc. to DIN EN 1092-2 PN -10°C to 120°C 130°C 150°CEN-JS1030 16 (bar) 16 15,8 15,5ARI-GESA® Construction / Installation variations / Flange dimensions6 Edition 12/14 - Data subject to alteration - Regularly updated data on www.ari-armaturen.comARI-ZESA® / ARI-GESA®Notch lever / Lock lever / Worm gearARI-ZESA® / ARI-GESA® with manual actuation arrangementNotch leverFor diameters larger than DN 125 we recommend using a gear mechanism. Gear recommended for inaccessible installation (see below).Lock lever• Cap convertable for lock lever• Variable adjustment (with 0 - 90° angle positioning) (With variable adjustment)For diameters larger than DN 125 we recommend using a gear mechanism. Gear recommended for inaccessible installation (see below).Worm gear• With variable adjustment• Self-lockingThe SHUT-position can be adjusted to ±5° by a locking screw.PartsPos. Sp.p. Description Fig. 20. / 21. / 22.012; 21. / 22.0137 x Lever cap PA 68 x Insulating cap PA 620 x Hexagon nut 5-A2B21 x Cheese head screw 8.8-A2B50 Notch lever DC01, 1.0330 (surface treatment)50 Lock lever DC01, 1.0330 (surface treatment)50 Worm gear+ Spare partsDN 25 32 40 50 65 80 100 125 150 200 250 300 350 400 500DimensionsH1with lever (mm) 187 187 193 199 209 217 238 263 279 313 -- -- -- -- --with gear (mm) 217 217 223 229 239 247 268 285 301 335 428 457 513 603 691P1 (mm) 184 184 184 184 184 184 184 273 273 273 -- -- -- -- --P2 (mm) 152 152 152 152 152 152 152 152 152 152 278 278 278 320 320ØC (mm) 125 125 125 125 125 125 125 125 125 125 250 250 250 315 315Type of gear SE07 SE07 SE07 SE07 SE07 SE07 SE07 SE07 SE07 SE07 SE10 SE10 SE10 SE12 SE12WeightsZESA®withlever(kg) 1,8 1,8 2,0 2,4 3,0 3,6 4,4 7,4 9,4 13,4 -- -- -- -- --GESA® (kg) 2,2 2,2 2,4 3,2 3,6 5,2 6,6 9,6 11,8 14,9/16,4 -- -- -- -- --ZESA®with gear(kg) 3,3 3,3 3,5 3,9 4,5 5,1 5,9 8,5 10,5 14,5 24,4 34,4 49 75,6 120GESA® (kg) 3,7 3,7 3,9 4,7 5,1 6,7 8,1 10,7 12,9 16/17,8 29,8 41 61 97 157Stop screw Lock nutPosition indicator(till valve center)(till valve center)(till valve center)7Edition 12/14 - Data subject to alteration - Regularly updated data on www.ari-armaturen.comARI-ZESA® / ARI-GESA®ARI-OMButterfly valve with electric rotary actuator Type: ARI-OM• for short time duty S 2-5 Min. (Periodic duty S3 30% duty cicle, max. 60 c/h, max. modulating torque = ca. 50% rated torque) • Enclosure IP 67• Temperature guard in the motorVoltages:• 230V 50Hz • 24V DC • 24V 50Hz ( Other voltages on request)Accessories:• Potentiometer (1000 Ohm) • Positioner 4-20 mA • Position-transmitter 4-20 mA • Heating • Travel switchFor connection refer to terminal connection in the operating instructions of the actuator DN 25 32 40 50 65 80 100 125 150 200ActuatorType of actuator OM-1 OM-A OM-2 OM-3Operating time (s) 13 24 17 26DimensionsH1 (mm) 278 278 284 290 300 308 379 451 467 501P1 (mm) 35 35 35 35 35 35 54 82 82 82P2 (mm) 80 80 80 80 80 80 54 118 118 118P3 (mm) 54 54 54 54 54 54 54 100 100 100P4 (mm) 54 54 54 54 54 54 54 230 230 230WeightsZESA® (kg) 3,3 3,3 3,5 4 4,4 5 6,9 16 17,7 22,1GESA® (kg) 3,7 3,7 4 4,7 5,2 6,8 9,3 18,5 20 25Operating and installation instructions can be downloaded at www.ari-armaturen.com. 8 Edition 12/14 - Data subject to alteration - Regularly updated data on www.ari-armaturen.comARI-ZESA® / ARI-GESA®DeufraButterfly valve with electric rotary actuator Type: Deufra• Type of operation on/off S4 30% (optional: for control S4 50%) • Enclosure IP 67• Temperature guard in the motor• HeatingVoltages:• 230V 50Hz • 400V 50Hz (nicht bei OA3)Other voltages on requestAccessories:• Travel switch • Potentiometer • Valve positioner 0-10V / 4-20mA • Position-transmitter Special actuators:• Reset to start on failure Type FQ For connection refer to terminal connection in the operating instructions of the actuator DN 25 32 40 50 65 80 100 125 150 200 250 300 350 400 500ActuatorType of actuator OA3 OA6 OA8 OA15 AS25 AS50 BS100Operating time (s) 6 6 6 15 10 30 30DimensionsH1 (mm) 352 352 358 364 374 382 403 420 436 470 453 527 585 620 708h (mm) 53 53 53 53 53 53 53 53 53 53 100 100 100 86 86ØC (mm) 60 60 60 60 60 60 60 60 60 100 160 250 250 250 250P1 (mm) 90 90 90 90 90 90 90 90 90 98 167 169 169 172 172P2 (mm) 160 160 160 160 160 160 202 202 202 260 312 340 340 392 392P3 (mm) 65 65 65 65 65 65 65 65 65 65 89 89 89 133 133P4 (mm) 125 125 125 125 125 125 125 125 125 125 226 226 226 284 284WeightsZESA® (kg) 7,1 7,1 7,3 7,8 8,2 8,8 9,9 13,4 14,8 18,9 37,4 45,5 61 100 141GESA® (kg) 7,5 7,5 7,8 8,5 9 10,6 12,2 15,8 17,2 21,1/21,8 43 54 74 121 181Operating and installation instructions can be downloaded at www.ari-armaturen.com.9Edition 12/14 - Data subject to alteration - Regularly updated data on www.ari-armaturen.comARI-ZESA® / ARI-GESA®AumaButterfly valve with electric rotary actuator Type: Auma• For short time duty S 2-15 Min. (for control S4 25%)• Enclosure IP 68• Temperature guard in the motor• HeatingVoltages:• 400V 50Hz • 230V 50Hz (Other voltages on request)Accessories:• Travel switch • Potentiometer • Auma Matic • Valve positioner 0-10V / 4-20mA • Position-transmitter For connection refer to terminal connection in the operating instructions of the actuator DN 25 32 40 50 65 80 100 125 150 200 250 300 350 400 500ActuatorType of actuator SQ05.2 SQ07.2 SQ10.2 SQ12.2Operating time (s) 16 16 16 32DimensionsH1 (mm) 472 472 478 484 494 502 523 540 556 590 643 663 719 832 920h (mm) 134 134 134 134 134 134 134 134 134 134 134 151 151 215 215ØC (mm) 160 160 160 160 160 160 160 160 160 160 160 200 200 200 200P1 (mm) 238 238 238 238 238 238 238 238 238 238 238 248 248 248 248P2 (mm) 62,5 62,5 62,5 62,5 62,5 62,5 62,5 62,5 62,5 62,5 62,5 80 80 104 104P3 (mm) 265 265 265 265 265 265 265 265 265 265 265 265 265 265 265P4 (mm) 249 249 249 249 249 249 249 249 249 249 249 254 254 254 254WeightsZESA® (kg) 24,4 24,4 24,6 25 25,6 26,2 27 27,6 31,6 35,6 42,9 56,4 70,9 99,7 143GESA® (kg) 24,8 24,8 25 25,8 26,2 27,8 29,2 31,8 34 38,6 48,3 63 82,6 117 178Operating and installation instructions can be downloaded at www.ari-armaturen.com.10 Edition 12/14 - Data subject to alteration - Regularly updated data on www.ari-armaturen.comSolenoid valve: for control of double acting actuators5/2 - wayAccessories: Limit switch in housingSolenoid valve: for control of single acting actuators3/2 - wayAccessories: Solenoid valveARI-ZESA® / ARI-GESA®AIR TORQUEButterfly valve with pneumatic rotary actuator Type: AIR TORQUE• Function: double acting single acting, Spring closes on air failure (opens)• Actuating pressure 6 bar (=0,6 MPa)• Position indicatorAccessories:• Limit switch open / close • Solenoid valve • Exhaust silencer with throttling function (double acting) • Speed regulating plate (single acting) • Valve positioner • Other actuating pressures on requestFor connection refer to terminal connection in the operating instructions of the actuator DN 25 32 40 50 65 80 100 125 150 200 250 300 350 400 500double actingActuatorType of actuator DR30 DR60 DR100 DR150 DR220 DR450 DR600 DR1200DimensionsH1 (mm) 233 233 239 245 255 263 301 331 347 393 448 509 567 635 792P1 (mm) 159 159 159 159 159 159 211 248 248 269 315 409 409 438 543P2 (mm) 83 83 83 83 83 83 95 106 106 123 141 172 172 187 222WeightsZESA® (kg) 3 3 3,2 3,7 4,1 4,7 6,6 10 11,4 18,6 27,8 43 59 90 147GESA® (kg) 3,4 3,4 3,7 4,4 4,9 6,5 9 12,4 13,8 19,5/21 33,9 51,5 72 111 187single actingActuatorType of actuator (closes) 30SC6 60SC6 100SC6 150SC6 220SC6 300SC6 450SC6 600SC6 1200SC6 2000 SC63000 SC6Type of actuator (opens) 30SO5 60SO5 100SO5 150SO5 220SO5 450SO5 900SO5 1200 SO52000 SO5DimensionsH1 (mm) 233 233 239 245 272 293 326 371 399 453 500 597 655 758 877P1 (mm) 159 159 159 159 211 248 269 315 345 409 438 543 543 621 684P2 (mm) 83 83 83 83 95 106 123 141 152 172 187 222 222 262 330WeightsZESA® (kg) 3,1 3,1 3,3 3,8 5,7 7,5 10,4 16 20,2 30,2 43,4 73,6 89 134 213GESA® (kg) 3,5 3,5 3,8 4,5 6,5 9,3 12,8 18,4 22,6 32,2/33,7 49,5 82,1 102 155 253Operating and installation instructions can be downloaded at www.ari-armaturen.com.11Edition 12/14 - Data subject to alteration - Regularly updated data on www.ari-armaturen.comSolenoid valve: for control of double acting actuators5/2 - wayAccessories: Limit switch in housing Accessories: Limit switchSolenoid valve: for control of single acting actuators3/2 - wayAccessories: Solenoid valveARI-ZESA® / ARI-GESA®barButterfly valve with pneumatic rotary actuator Type: bar• Function: double acting single acting, Spring closes on air failure (opens)• Actuating pressure 6 bar (=0,6 MPa)Accessories: • Limit switch open / close • Solenoid valve • Exhaust silencer with throttling function (double acting) • Speed regulating plate (single acting) • Position indicator • Valve positioner • Other actuating pressures on requestFor connection refer to terminal connection in the operating instructions of the actuator DN 25 32 40 50 65 80 100 125 150 200 250 300 350 400 500double actingActuatorType of actuator GTD 58/90 GTD 68/90 GTD 98/90 GTD 110/90GTD 115/90 GTD143/90GTD 163/90GTD 210/90DimensionsH1 (mm) 232 232 238 244 254 276 297 343 359 416 443 530 588 637 782P1 (mm) 127 127 127 127 127 140 140 209 209 222 292 337 337 377 462P2 (mm) 72 72 72 72 72 82 82 108 108 120 120 172 172 172 224WeightsZESA® (kg) 2,3 2,3 2,5 3 3,4 4,5 5,4 9,6 11 17,3 26,5 42,9 58,5 86,5 143GESA® (kg) 2,7 2,7 3 3,7 4,2 6,3 7,7 12 13,4 19,3/20,2 32,6 51,4 71,5 107,5 183single actingActuatorType of actuator (closes) GTE 68/90 GTE 78/90GTE 88/90GTE 98/90GTE 110/90GTE 115/90GTE 127/90GTE 143/90 GTE 210/90 GTE 250/90Type of actuator (opens) GTE 68/90 GTE 78/90GTE 88/90 GTE 110/90GTE 115/90GTE 127/90GTE 143/90 GTE 210/90 GTE 250/90DimensionsH1 (mm) 246 246 252 258 280 296 349 366 382 436 501 587 645 741 829P1 (mm) 140 140 140 140 161 182 222 222 292 298 337 462 462 603 603P2 (mm) 82 82 82 82 94 100 120 120 120 137 172 224 224 272 272WeightsZESA® (kg) 3 3 3,2 3,7 4,9 6 9,8 12,4 16 22,8 37,5 66,8 82 136 177GESA® (kg) 3,4 3,4 3,7 4,5 5,6 7,8 12,2 14,8 18,4 24,8/25,7 43,6 75,3 95 157 217Operating and installation instructions can be downloaded at www.ari-armaturen.com.12Edition 12/14 - Data subject to alteration - Regularly updated data on www.ari-armaturen.comTHEA® - integrated THErmo-Appliance Standard thermometer ranges- cold (-20 to +40°C) - warm (0 to +120°C) Indication: Precision class 1,0 (thermometer adjusted to ARI-THEA)Diameter range: DN 25 / 32 - DN 40 DN 50 - DN 80 DN 100 DN 125 - DN 200Order data: Thermo-Appliance with range ................, for diameter range .........Indicator installed by insertion into the bore hole of the lever and the stem - convertible on siteARI-ZESA® / ARI-GESA® THErmo-Appliance / Actuator flange connectionDouble „D“ 2-flat SW 4-square SWActuator flange connectionDN25-200 DN250-500DN 25 32 40 50 65 80 100 125 150 200 250 300 350 400 500Connection EN ISO 5211 F 05 F 07 F 10 F 14Double „D“ 2-flat SW (mm) 11 d11 17 d11 -- --4-square SW (mm) -- -- 22 d11 30 d11 1) Ød (mm) 7 9 11 18ØD1 (mm) 65 90 125 175ØD2 (mm) 35 H10 55 H10 70 H10 100 H10ØD3 (mm) 50 70 102 140ØD4 (mm) 12,9 19,7 -- --l (mm) 15 18 24 40t (mm) 3 3 3 41) deviating from EN ISO5211Please indicate when ordering: - Figure-No. - Nominal pressure- Nominal diameter- Soft seal seat material- Stem / disc material- Actuation arrangement- Special design / accessoriesPlease indicate in your order, if the valves are to be installed in hazardous areas (ATEX).Example:Figure 22.012; Nominal pressure PN16; Nominal diameter DN100; Seat of EPDM, Washer/Stem of 1.4581/1.4021, with notch lever and integrated Thermo-Indication (-20 to 40°C).13Edition 12/14 - Data subject to alteration - Regularly updated data on www.ari-armaturen.comARI-ZESA® / ARI-GESA® Capacity chart / Difference between disc outside-diameter and face-to-faceKvs-value / Zeta-valueDN 25 32 40 50 65 80 100 125 150 200 250 300 350 400 500Kvs-value (m3/h) 26 26,5 49,6 116 259 377 763 1030 1790 3460 5070 7430 10320 13290 21180Zeta-value -- 0,93 2,4 1,7 0,75 0,43 0,46 0,27 0,37 0,25 0,21 0,24 0,23 0,23 0,23 0,22close openindication - leveropening angle discDifference between disc outside-diameter and face-to-faceDN 25 32 40 50 65 80 100 125 150 200 250 300 350 400 500B (mm) -- -- 5 5 11 18 25 36 48 71 91 112 132 147 188D (mm) -- -- 26 29 49 68 88 115 142 194 243 292 333 383 48614 Edition 12/14 - Data subject to alteration - Regularly updated data on www.ari-armaturen.comARI-ZESA® / ARI-GESA® Actuator selectionDN 25-50 65 80 100 125 150 200 250 300 350 400 500Flange connection EN ISO 5211 F 05 F 07 F 10 F 14Double „D“ 2-flat SW (mm) 11 d11 17 d11 -- --4-square SW (mm) -- -- 22 d1130 d11 deviating from EN ISO5211Manual actuation Notch lever Size I II --Lock leverSize I II --Worm gearType SE07 SE10 SE12Electric rotary actuator ARI-OM (230V 50Hz)Type OM-1 OM-A OM-2 OM-3 --Deufra (230V 50Hz)Type OA3 OA6 OA8 OA15 AS25 AS50 BS100Auma (400V 50Hz)Type SQ05.2 SQ07.2 SQ10.2 SQ12.2Pneumatic rotary actuatorAIR TORQUEdouble actingType DR30 DR60 DR100 DR150 DR220 DR450 DR600 DR1200single actingSpring closes on air failureType 30SC6 60SC6 100SC6 150SC6 220SC6 300SC6 450SC6 600SC6 1200SC6 2000 SC63000 SC6Spring opensType 30SO5 60SO5 100SO5 150SO5 220SO5 450SO5 900SO5 1200 SO52000 SO5bardouble actingType GTD58/90 GTD68/90 GTD98/90 GTD 110/90GTD 115/90 GTD143/90GTD 163/90GTD 210/90single actingSpring closes on air failureType GTE 68/90-12GTE 78/90-10GTE 88/90-10GTE 98/90-12GTE 110/90-12GTE 115/90-12GTE 127/90-12GTE 143/90-12GTE210/90-10 GTE250/90-8Spring opensType GTE 68/90-8GTE 78/90-8GTE 88/90-8GTE 110/90-8GTE 115/90-6GTE 127/90-8GTE 143/90-8 GTE210/90-8 GTE250/90-6Technology for the Future. G E R M A N Q U A L I T Y V A L V E SARI-Armaturen Albert Richter GmbH & Co. KG, D-33756 Schloß Holte-Stukenbrock, Tel. +49 52 07 / 994-0, Telefax +49 52 07 / 994-158 or 159 Internet: http://www.ari-armaturen.com E-mail: info.vertrieb@ari-armaturen.com ARI-ZESA / ARI-GESA / THEA Butterfly valves ARI-ZESA® Fig. 012 Parts Dimensions and weights Construction Pressure-temperature-ratings Standard-flange dimensions ARI-GESA Fig. 013 Parts Dimensions and weights Construction Pressure-temperature-ratings Standard-flange dimensions with lever Lock lever Notch lever Worm gear Butterfly valve with electric rotary actuator Type: ARI-OM Butterfly valve with electric rotary actuator Type: Deufra Butterfly valve with electric rotary actuator Type: Auma Butterfly valve with pneumatic rotary actuator Type: bar THEA® - integrated THErmo-Appliance Capacity chart Difference between disc outside-diameter and face-to-face Actuator selection ARI-ZESA EA Butterfly valves ARI-ZIVA-Z / ARI-ZIVA-G Butterfly valves