C Litronic - A 900 - Wheeled Excavators Brochure

Wheeled Excavator A 900 COperating Weight: 38,400 - 43,200 lbEngine Output (SAE J1349): 127 HP / 95 kW Engine Output (ISO 9249): 129 HP / 95 kWBucket Capacity: 0.42 - 1.24 yd³A900C_KORR11_enUS.indd 1 04.02.11 10:492 A 900 C LitronicOperating Weight: 38,400 - 43,200 lbEngine Output (SAE J1349): 127 HP / 95 kWEngine Output (ISO 9249): 129 HP / 95 kWBlade Capacity: 0.42 - 1.24 yd³A 900 CA900C_KORR11_enUS.indd 2 04.02.11 10:443A 900 C LitronicReliabilityLiebherr hydraulic excavators have been designed and built to withstand the toughest of conditions at the buil-ding site. Their rugged design, high-tensile materials and individual components ensure maximum performance and machine longevity.PerformanceLiebherr wheel excavators have been designed for maxi-mum productivity. Maximum digging performances, high lift capacities and quick working cycles are prerequisites for efficient building site operation additionally, a wide variety of attachments are available to optimize every excavator application.ComfortLargely dimensioned and ergonomically designed, the Liebherr excavator cab features an operator’s seat which can be individually adjusted, as well as clearly arranged control instruments and ideal all-round view. Automatic air-conditioning guarantees an optimum temperature in the Liebherr cab during working shifts.EconomyThe Liebherr-Litronic-System increases machine perfor-mance, reduces fuel consumption and minimizes service and maintenance costs. Due to Liebherr’s well- balanced range, the ideal machine can always be selected to suit every application.A900C_KORR11_enUS.indd 3 04.02.11 10:444 A 900 C LitronicFeatures• High-tensile steel plates in high-stress areas for the toughest of applications• Well-thought-out and secure bearings for attachments and cylinders• Maximum resistance, even when lifting heavy loadsA900C_KORR11_enUS.indd 4 04.02.11 10:445A 900 C LitronicReliabilityLiebherr hydraulic cylinders• Specific size for each machine• High-grade surface coating of the piston rods• All Liebherr cylinders feature special long-life sealing systems• Shock absorption at both sides in the working cylindersFunctional safety• Essential operating data is stored and can be recalled at any time.• Control and monitoring functions increase functional safety of the machine.• Four fixed working modes for output discharge facilitate an effective and efficient operation: – Eco-Mode: for high output at big fuel savings – Power-Mode: for heavy-duty digging-and loading performance under severe conditions – Lift-Mode: for precise handling of heavy loads – Fine-Mode: for fine control at precision workLiebherr construction machinery is proven all over the world every day on the most diverse of building sites. Many years of experience as the world’s largest manufacturer of rubber-tire excavators, continuous development and the intro-duction of the latest technology are evident in every machine, guaranteeing ab-solute safety during applications. With its rugged design, and featuring Liebherr components, the Liebherr hydraulic excavators have been designed for extreme-ly long life-expectancy.Quality in detailLiebherr components Components such as engine, hydraulic cylinders, swing gear and electric parts have been specially designed, tested and manufactured by Liebherr for construction machinery. Parts including engines and pumps for example, are already being synchronized with each other as early as the construction phase, yielding a constant standard of quality.Functional safety Safety-orientated components, fitted as standard, allow high availability.The operator can thus concentrate fully on the task at hand, due to the integrated on-board electronics performing a constant balancing of pre-defined set data.Filtering of metallic filings by the magnetic rod, fitted in the hydraulic system as standard, increases life-expectancy of the hydraulic components and the oil.Rugged attachmentsWorking attachment The durable attachments have been designed for the toughest of applications. All components are op-timized to the FEM methods and the hoist cylinders feature bearings on both sides.Piping The hydraulic lines are arranged optimally to safe-guard against damage. The electric cabling is made with high-grade materials, thus guaranteeing a relia-ble supply to the consumer.A900C_KORR11_enUS.indd 5 04.02.11 10:446 A 900 C LitronicLiebherr diesel engine • Long life-expectancy, expansive cylinder capacity and increased weight • Tier 3 and Stage IIIA Compliant• Specially designed for construction machinery operation • Oil supply even with extreme tilt angleA900C_KORR11_enUS.indd 6 04.02.11 10:457A 900 C LitronicPerformanceLiebherr wheel excavators have been designed for maximum productivity. Per-fectly harmonized, the Liebherr-developed and Liebherr-manufactured compo-nents including diesel engine, hydraulic pump and motor, as well as swing gear and cylinders, guarantee maximum performance. Tremendous digging and brea-kout forces, extensive lifting capacities and quick working and travel movements are thus resulted.Innovative solutionsIntelligent undercarriageThe entire travel drive unit is integrated in the sturdy undercarriage. Intelligently built and robust in service, the undercarriage offers the travel drive unit the best possible protection from debris, stones and soil. Its advantages are perfect all-terrain compatibility and extremely high ground clearance.Multitude of attachmentsLiebherr provides an individual, application-related range of diverse attachments. Hydraulic booms, ad-justable in height, as well as standard can be com-bined with different sticks.Extensive lifting capacitiesTrenching the lifting of pipes are everyday tasks for rubber-tire excavators. These requirements are en-dorsed via an intelligent concept of uppercarriage sectioning together with the positioning of the Lieb-herr engine, mounted at a transversal angle directly in front of the counterweight. Separate hoist cylinder bearing points at the upper end of the basic boom also increase the lifting capacities considerably.High productivityQuick working cycles High swing torque – attained as a result of the Liebherr swing ring featuring internal teeth and sw-ing drive, specially designed to increase the torque.Performance without compromiseMaximum performance and maximum forces are available to the operator at all times.Rugged undercarriage • Various undercarriage designs fea-turing welded, durable outriggers allow safe positioning, optimum stability, and long life-expectancy of the machine for every application.• Prop-up blade / dozing blade in box-type design – only two bearing points for high torsional resistance• Optional protection system for blade cylindersLitronic• Increases productivity of the excavator • Reduces fuel consumption• Reduces service costs and eases operation • Allows maximum sensitivity and as many overlapping movements as are requiredA900C_KORR11_enUS.indd 7 04.02.11 10:458 A 900 C LitronicLarge-sized cab• Adjustable steering column• Operator’s seat, adjustable in height and can also be adapted to the individual weight of the operator.• Consoles with or without possibility of horizontal adjustment.• Large roof window• Sun blindsA900C_KORR11_enUS.indd 8 04.02.11 10:459A 900 C LitronicComfortThe excavator operator is provided with an ergonomically-arranged working area within Liebherr hydraulic excavator cabs. All switches and functions are logically laid out, and operator’s seat, steering column and consoles can be adjusted indi-vidually. Conditioning and concentration can thus be maintained throughout the entire working day, guaranteeing constant, maximum productivity of the operator.Mobile comfortEasy access Wide steps, ergonomically-positioned handles and adjustable steering column allow an easy access into the Liebherr operator’s cab.Optimum visibility A well thought out design for the upper carriage. The cab features large glass panels and rounded edges to increase overall visibility and guarantees a safe overview of the entire working area.Pleasant surroundings Reduced engine speed together with elaborate sound insulation, as well as optimized hydraulic components, allow a comfortable noise level both inside and out.Maintenance featuresEasy maintenance Semi-automatic central lubrication for swing gear and main parts of the attachment.Ease of operation A shut-off valve, fitted to the hydraulic tank as stan-dard, disconnects the system and guarantees ease of maintenance to the hydraulic system.Easy access Large maintenance panels allow comfortable and safe access to all maintenance points.Fully-automatic air-conditioning system• The air-conditioning system, fitted as standard, offers the same comfort as that of a regular car • Two sensors for precise temperature regulation • Ventilation flaps are controlled via keys• Heating function for quick dehumidifying / defrosting of the windshieldStorage compartment – Everything has its place• Sufficient storage space for a commer-cially-approved cooler box behind the operator’s seat• Drinks holder and storage compart-ment in operator’s cab• Large storage box behind the operator’s cab • Two standard tool boxes in the undercarriageA900C_KORR11_enUS.indd 9 04.02.11 10:4510 A 900 C LitronicHydrostatic fan drive• Accelerated warm-up period• Guaranteed constant oil quality as a result of constant oil temperature • Increased life-expectancy of drive components• The fan only runs at the output required, thus conserving fuel and reducing the noise level considerablyA900C_KORR11_enUS.indd 10 04.02.11 10:4511A 900 C LitronicEconomyService-orientated• Service points of the engine – such as filter or filling amount displays are easily accessible and can be easily reached from the mainte-nance platform• The magnetic rod on the hydraulic oil return flow increases life-expec-tancy of the oil• Semi-automatic central lubrication for swing gear and main parts of the attachment for quick maintenanceModular quick-change system made by Liebherr• Likufix – connects all hydraulically mounted tools without having to leave the operator’s cab, maximum produc-tivity due to tool change being per-formed in a matter of seconds • The suitable digging tool for every application. Your machine is a multi-functional tool carrier and will pay for itself very quickly.• Mechanical and hydraulic Liebherr quick-change adapter available.Liebherr offers a wide range of models, guaranteeing optimum suitability for eve-ry application. Easy access to components, as well as the proven service offer allows maintenance tasks to be performed in the shortest of times, thus reducing operating costs considerably.Low operating costs Solid Liebherr Engine Maximum power of the engine is generated even when running at minimum speed. This allows the ne-cessary output without limitation, whereby the tor-que which is available is ample for the level required, resulting in high productivity with low consumption.Automatic idle If no working or travel movements are being per-formed, the shiftable function reduces the engine speed to idle, which in turn reduces fuel consumpti-on and emission levels.Intelligent hydraulic managementThe state-of-the-art hydraulic system allows conver-sion of the maximum engine output into high force or speed, as required. The maximum possible forces are available at all times.Investment for the futureExtensive service offer Proven service offers assured by our service person-nel trained directly at the manufacturing plants, and endorsed by our tight-knit network of dealers, pro-vide services in all required areas. Direct contact to Liebherr is guaranteed via complete integration of all service points in our own Liebherr logistics system.High resale values Liebherr excavators are built with high-grade mate-rials and quality production to provide a long-term operational life-span, thus guaranteeing maximum resale values.A900C_KORR11_enUS.indd 11 04.02.11 10:4512 A 900 C LitronicTechnical DataEngineRating per SAE J1349 ??????????? 127 HP (95 kW) at 1,800 rpmRating per ISO 9249 ????????????? 129 HP (95 kW) at 1,800 rpmModel ??????????????????????????????? Liebherr D 934 S according to stage IIIA / Tier 3Type ???????????????????????????????? 4 cylinder in-line Bore/Stroke ?????????????????? 4.8/5.4 in Displacement ???????????????? 390 in3Engine operation ????????????????? 4-stroke dieselunit pump system turbo-charged and after-cooled reduced emissionsCooling system ??????????????????? water-cooled and integrated motor oil coolerAir cleaner ????????????????????????? dry-type air cleaner with pre-cleaner, primary and safety elementsFuel tank ??????????????????????????? 77 galEngine idling??????????????????????? sensor controlledElectrical system Voltage ??????????????????????? 24 V Batteries ?????????????????????? 2 x 110 Ah/12 V Alternator ????????????????????? three phase current 28 V/80 AHydraulic SystemHydraulic pump ??????????????????? Liebherr, variable displacement, swash-plate pump Max. flow ????????????????????? 79 gpm Max. hydr. pressure ???????? 5,076 psiHydraulic pumpregulation and control ??????????? Liebherr-Synchron-Comfort-system (LSC) with electronic horsepower regulation, pres sure cut-off, load sensing and torque controlled swing drive priorityHydraulic tank capacity ????????? 46 galHydraulic system capacity ?????? max. 77 galFiltration ???????????????????????????? one main return filter with integrated partial micro filtration (5 µm)Cooling system ??????????????????? compact cooler, consisting of a water cooler, sandwiched with hydraulic oil cooler, fuel cooler and after-cooler cores with hydrostatically driven fanModes ?????????????????????????????? can be adjusted by the operator to adjust engine and hydraulic performance to match job condi-tions LIFT ??????????????????????????? for precise lifting tasks FINE ?????????????????????????? for precision work at high speed i.e. grading ECO ??????????????????????????? for most economic performance at best environ-mental conditions POWER ?????????????????????? for max. outputSuper-Finish ?????????????????????? additional operator adjustable work speed func-tion for further increased feathering. Applies to all modes and all control functionsRPM adjustment ????????????????? stepless adjustment of engine output via rpmHydraulic ControlsPower distribution ???????????????? via control valve with integrated safety valves, simultaneous and independent operation of travel drive, swing drive and workControl type Attachment and swing ????? proportional via joystick levers Travel ????????????????????????? proportional via foot pedalAdditional functions ?????????????? via switch and/or proportional foot pedalsOption ?????????????????????????????? Liebherr-Proportional-Controls, proportionally acting transmitters on the joysticks for addi tional hydraulic functionsSwing DriveDrive ???????????????????????????????? Liebherr swashplate motor with torque control and integrated brake valveTransmission ?????????????????????? Liebherr compact planetary reduction gearSwing ring ????????????????????????? Liebherr sealed single race ball bearing swing ring, internal teethSwing speed ?????????????????????? 0 – 9.0 rpmSwing torque ?????????????????????? 30,978 lbf ftHolding brake ????????????????????? wet discs (spring applied – pressure released)Option ?????????????????????????????? pedal controlled positioning brakeOperator’s CabCab ????????????????????????????????? resiliently mounted, sound insulated, tinted windows, front window stores overhead, door with sliding window, large roof win dow, sun visorOperator’s seat ??????????????????? fully adjustable, shockabsorbing suspension, adjustable to operator’s weight and size, 6-way adjustable Liebherr seatJoysticks ??????????????????????????? integrated into adjustable seat consolesMonitoring ????????????????????????? menu driven query of current operating condi-tions via the LCD display. Automatic monitoring, display, warning (acoustical and optical signal) and saving machine data, for example, engine overheating, low engine oil pressure or low hydraulic oil levelAir conditioning ??????????????????? standard air conditioning, combined cooler/ heater, additional dust filter in fresh air/recircu-latedNoise emissionISO 6396 ??????????????????????????? LpA (inside cab) = 72 dB(A)2000/14/EC ???????????????????????? LWA (surround noise) = 99 dB(A)UndercarriageDrive ???????????????????????????????? variable flow swashplate motor with automatic brake valveTransmission ?????????????????????? oversized two speed power shift trans mission with additional creeper speedTravel speed ?????????????????????? 0 – 1.6 mph (creeper speed off road)0 – 3.1 mph (off road) 0 – 5.6 mph (creeper speed on road) 0 – 12.4 mph (road travel) 0 – 18.6 mph SpeederAxles ???????????????????????????????? automatic or oper ator controlled front axle oscillation lockBrakes ?????????????????????????????? steering and rigid axle with wet, maintenance-free multi disc brakes with minimized backlash. Spring applied/pressure released parking brake integrated into gear boxStabilization ??????????????????????? stabilizing blade (adjustable during travel for dozing) + 2 pt. outriggers 4 pt. outriggersAttachmentHydraulic cylinders ??????????????? Liebherr cylinders with special seal and shock absorptionPivots ??????????????????????????????? sealed, low maintenanceLubrication ???????????????????????? Liebherr semi-automatic central lubrication system A 900 C Litronic 13Dimensions Stick Two-piece Boom 11’10” Mono Boom 16’5” blade 4 pt. blade 4 pt. + 2 pt. outr. + 2 pt. outr. outr. outr. ft in ft in ft in ft in ft inV 7’5” 20’4” 20’4” 19’ 19’ 8’ 19’4” 19’4” 17’ 9” 17’9” 8’8” 19’ 19’ 18’ 6” 18’3”*W 7’5” 10’ 10’ 10’ 4” 10’4” 8’ 10’ 10’ 10’ 10’ 8’8” 10’2” 10’2” 10’ 2” 10’2”*X 7’5” 28’5” 28’5” 27’ 7” 27’7” 8’ 28’5” 28’5” 27’ 7” 27’7” 8’8” 28’5” 28’5” 28’10” 28’7”*Dimensions are with attachment over steering axle* Attachment over digging axle for shorter transport dimensions ft inA 8’ 4”B 8’ 4”B1 12’ 1”B3 8’ 4”C 10’ 4”D 7’ 5”E 7’ 8”H 8’ 1”I3 1’ 3”J3 1’11”K 4’ 1”L 8’ 4”M 3’ 7”Q 1’ 2”T1 3’ 5”T3 3’ 9”U1 14’ 5”U3 15’ 7”E = Tail radiusTires 10.00-20VMLU1T1KWDEXHCBQAB1B3BB1T3I3J3U3T1 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y V V y Y Y Y Y Y Y y y v Y V V Y V V Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y V y y Y Y V Y Y V y y v Y V y Y V y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y V y y Y Y V Y Y V y v v V V y V V y14 A 900 C LitronicBackhoe Bucketwith Two-piece Boom 11’10”10ft m119876543210-1-230352520151050-5-10-15-3-4-5-60112323456789100mft51015202530Digging Envelopewith Quick Coupler 1 2 3Stick length ft in 7’ 5” 8’ 8’ 8”Max. digging depth ft in 18’ 6” 19’ 19’10”Max. reach at ground level ft in 29’10” 30’6” 31’ 2”Max. dumping height ft in 23’ 7” 24’3” 24’ 9”Max. teeth height ft in 33’10” 34’3” 34’11”Min. attachment radius ft in 9’ 4” 9’ 9’ 2”WeightsThe base machine weight with 8 tires plus intermediate rings, without two-piece boom, stick, quick coupler and bucket.Undercarriage versions WeightA 900 C litronic` with stabilizer blade + 2 pt. outriggers 33,400 lbA 900 C litronic` with 4 pt. outriggers 34,000 lbThe operating weight includes the basic machine with 8 tires plus intermediate rings, two-piece boom 11’10”, stick 8’8”, quick coupler 48 and bucket 41.3”/ 1.05 yd3.Undercarriage versions WeightA 900 C litronic` with stabilizer blade + 2 pt. outriggers 41,900 lbA 900 C litronic` with 4 pt. outriggers 42,100 lbDigging Forceswithout Quick Coupler 1 2 3Max. digging force (ISO 6015) lbf 18,210 17,085 19,096 lb 18,298 16,976 16,094Max. breakout force (ISO 6015) lbf 22,121 22,121 22,121 lb 22,046 22,046 22,046Max. breakout force with ripper bucket 28,259 lbf (28,219 lb)Buckets Machine stability per ISO 10567* (75 % of tipping capacity) Stabilizers Stabilizer blade + 4 pt. outriggers raised 2 pt. outriggers down down Stick length (ft in) Stick length (ft in) Stick length (ft in) 7’5” 8’ 8’8” 7’5” 8’ 8’8” 7’5” 8’ 8’8” in yd3 lb19.7”2) 0.42 63925.6”2) 0.59 88233.5”2) 0.78 94841.3”2) 1.05 1,12449.2”2) 1.24 1,23519.7”3) 0.42 72825.6”3) 0.59 97033.5”3) 0.78 1,05841.3”3) 1.05 1,25749.2”3) 1.24 1,38919.7”4) 0.44 61725.6”4) 0.59 83833.5”4) 0.85 90441.3”4) 1.11 1,08049.2”4) 1.37 1,168* Indicated loads are based on ISO 10567 and do not exceed 75 % of tipping or 87 % of hydraulic capacity, max. stick length without quick coupler, lifted 360° on firm with blocked oscillating axle1) comparable with SAE (heaped)2) Bucket with teeth 3) Bucket with teeth in HD-version 4) Bucket with cutting edge (also available in HD-version)Buckets with 19.7” cutting width with limited digging depthMax. material weight Y = = 3,034 lb/yd3, V = = 2,528 lb/yd3, y = = 2,023 lb/yd3, v = not authorizedCutting widthCapacity ISO 74511)Weight A 900 C Litronic 15Lift Capacitieswith Two-piece Boom 11’10”Stick 7’5” 10 ft 15 ft 20 ft 25 ft ft Undercarriage ft in Stabilizers raised Blade + 2 pt. down 30 4 pt. outr. down Stabilizers raised Blade + 2 pt. down 25 4 pt. outr. down Stabilizers raised Blade + 2 pt. down 20 4 pt. outr. down Stabilizers raised Blade + 2 pt. down 15 4 pt. outr. down Stabilizers raised Blade + 2 pt. down 10 4 pt. outr. down Stabilizers raised Blade + 2 pt. down 5 4 pt. outr. down Stabilizers raised Blade + 2 pt. down 0 4 pt. outr. down Stabilizers raised Blade + 2 pt. down – 5 4 pt. outr. down Stabilizers raised Blade + 2 pt. down – 10 4 pt. outr. down Stabilizers raised Blade + 2 pt. down – 15 4 pt. outr. down 8,5* 8,5* 5,2* 5,2* 8,5* 8,5* 5,2* 5,2* 8,5* 8,5* 5,2* 5,2* 17’? 3” 9,9 10,3* 6,1 8,0* 4,6* 4,6* 10,3* 10,3* 8,0* 8,0* 4,6* 4,6* 10,3* 10,3* 8,0* 8,0* 4,6* 4,6* 21’10” 13,9* 13,9* 9,7 13,3* 6,2 9,6* 4,1 4,4* 13,9* 13,9* 13,3* 13,3* 10,1 11,2* 4,4* 4,4* 13,9* 13,9* 13,3* 13,3* 11,2* 11,2* 4,4* 4,4* 24’? 6” 16,8 25,2* 9,4 14,5 6,2 9,5 3,9 6,4 3,6 4,5* 25,2* 25,2* 15,1 15,9* 10,0 12,1* 6,8 7,4* 4,5* 4,5* 25,2* 25,2* 15,9* 15,9* 12,0 12,1* 7,4* 7,4* 4,5* 4,5* 25’11” 16,4 24,8* 9,3 14,2 5,9 9,4 3,8 6,3 3,4 4,8* 24,8* 24,8* 14,8* 17,9* 9,9 13,0* 6,6 9,5* 4,8* 4,8* 24,8* 24,8* 17,9* 17,9* 11,9 13,0* 8,2 9,5* 4,8* 4,8* 26’? 3” 16,0 27,2 8,9 14,3* 5,6 9,0 3,6 6,1 3,4 5,4* 27,7* 27,7* 14,9 18,2* 9,5 13,1* 6,5 8,3* 5,4* 5,4* 27,7* 27,7* 17,9* 18,2* 11,8 13,1* 8,1* 8,3* 5,4* 5,4* 25’? 7” 15,1 28,1* 8,4 14,1 5,1 8,6 3,8 6,5 29,0* 29,8* 14,9 18,5* 9,1 13,2* 6,7* 6,7* 29,8* 29,8* 18,3* 18,5* 11,4 13,2* 6,7* 6,7* 23’10” 14,9 27,9 7,8 13,4 4,9 8,4 4,7 7,9* 29,5 30,6* 14,2 17,8* 8,9 9,1* 7,9* 7,9* 30,6* 30,6* 17,8* 17,8* 9,1* 9,1* 7,9* 7,9* 20’? 7”Stick 8’8” 10 ft 15 ft 20 ft 25 ft ft Undercarriage ft in Stabilizers raised Blade + 2 pt. down 30 4 pt. outr. down Stabilizers raised Blade + 2 pt. down 25 4 pt. outr. down Stabilizers raised Blade + 2 pt. down 20 4 pt. outr. down Stabilizers raised Blade + 2 pt. down 15 4 pt. outr. down Stabilizers raised Blade + 2 pt. down 10 4 pt. outr. down Stabilizers raised Blade + 2 pt. down 5 4 pt. outr. down Stabilizers raised Blade + 2 pt. down 0 4 pt. outr. down Stabilizers raised Blade + 2 pt. down – 5 4 pt. outr. down Stabilizers raised Blade + 2 pt. down – 10 4 pt. outr. down Stabilizers raised Blade + 2 pt. down – 15 4 pt. outr. down 5,9* 5,9* 5,9* 5,9* 5,9* 5,9* 11’? 7” 8,1* 8,1* 4,3* 4,3* 8,1* 8,1* 4,3* 4,3* 8,1* 8,1* 4,3* 4,3* 19’? 3” 8,7* 8,7* 6,2 7,8* 3,8* 3,8* 8,7* 8,7* 7,8* 7,8* 3,8* 3,8* 8,7* 8,7* 7,8* 7,8* 3,8* 3,8* 23’? 5” 9,7 10,5* 6,3 9,6* 4,0 5,7* 3,6* 3,6* 10,5* 10,5* 9,8* 9,8* 5,7* 5,7* 3,6* 3,6* 10,5* 10,5* 9,8* 9,8* 5,7* 5,7* 3,6* 3,6* 25’11” 16,8* 23,5* 9,4 14,4 6,2 9,4 3,9 6,4 3,2 3,7* 23,5* 23,5* 15,0* 15,0* 9,9 11,6* 6,8 8,3* 3,7* 3,7* 23,5* 23,5* 15,0* 15,0* 11,6* 11,6* 8,3* 8,3* 3,7* 3,7* 27’? 3” 16,3 24,4* 9,1 14,1 6,0 9,4 3,8 6,3 3,0 3,9* 24,4* 24,4* 14,7* 17,3* 9,8 12,6* 6,7 10,0* 3,9* 3,9* 24,4* 24,4* 17,3* 17,3* 11,7 12,6* 8,2 10,0* 3,9* 3,9* 27’? 6” 16,1 26,7* 8,9 14,1 5,7 9,1 3,6 6,1 3,1 4,4* 26,7* 26,7* 14,8 18,0* 9,6* 13,0* 6,5 10,0* 4,4* 4,4* 26,7* 26,7* 17,7* 18,0* 11,8* 13,0* 8,0 10,0* 4,4* 4,4* 26’11” 15,1 27,5 8,4 14,1 5,2 8,7 3,4 5,9 3,4 5,2* 28,6* 29,4* 14,9 18,2* 9,2 13,2* 6,3 6,3* 5,2* 5,2* 29,4* 29,4* 18,0 18,2* 11,5 13,2* 6,3* 6,3* 5,2* 5,2* 25’? 3” 14,8 27,9 7,8 13,5 4,9 8,4 4,1 7,1 29,4 30,4* 14,2 18,6* 8,9 11,2* 7,1* 7,1* 30,4* 30,4* 18,2 18,6* 11,2 11,2* 7,1* 7,1* 22’? 3” 14,3 22,0* 8,3 12,0* 22,0* 22,0* 12,0* 12,0* 22,0* 22,0* 12,0* 12,0* 14’? 1”Stick 8’ 10 ft 15 ft 20 ft 25 ft ft Undercarriage ft in Stabilizers raised Blade + 2 pt. down 30 4 pt. outr. down Stabilizers raised Blade + 2 pt. down 25 4 pt. outr. down Stabilizers raised Blade + 2 pt. down 20 4 pt. outr. down Stabilizers raised Blade + 2 pt. down 15 4 pt. outr. down Stabilizers raised Blade + 2 pt. down 10 4 pt. outr. down Stabilizers raised Blade + 2 pt. down 5 4 pt. outr. down Stabilizers raised Blade + 2 pt. down 0 4 pt. outr. down Stabilizers raised Blade + 2 pt. down – 5 4 pt. outr. down Stabilizers raised Blade + 2 pt. down – 10 4 pt. outr. down Stabilizers raised Blade + 2 pt. down – 15 4 pt. outr. down 8,3* 8,3* 4,7* 4,7* 8,3* 8,3* 4,7* 4,7* 8,3* 8,3* 4,7* 4,7* 18’? 3” 9,5* 9,5* 6,2 8,0* 4,2* 4,2* 9,5* 9,5* 8,0* 8,0* 4,2* 4,2* 9,5* 9,5* 8,0* 8,0* 4,2* 4,2* 22’? 7” 11,5* 11,5* 9,7 11,8* 6,3 9,6 3,9 4,6* 3,9 4,0* 11,5* 11,5* 11,8* 11,8* 10,1 10,5* 4,6* 4,6* 4,0* 4,0* 11,5* 11,5* 11,8* 11,8* 10,5* 10,5* 4,6* 4,6* 4,0* 4,0* 25’? 2” 16,9* 24,7* 9,3 14,4 6,2 9,5 3,9 6,4 3,4 4,1* 24,7* 24,7* 15,1 15,5* 9,9 11,9* 6,8 8,1* 4,1* 4,1* 24,7* 24,7* 15,5* 15,5* 11,9* 11,9* 8,1* 8,1* 4,1* 4,1* 26’? 7” 16,2 24,4* 9,2 14,2 6,0 9,4 3,8 6,3 3,2 4,3* 24,4* 24,4* 14,7* 17,6* 9,9 12,8* 6,7 10,1* 4,3* 4,3* 24,4* 24,4* 17,6* 17,6* 11,8 12,8* 8,2 10,1* 4,3* 4,3* 26’11” 16,1 27,0* 8,9 14,2 5,6 9,1 3,6 6,1 3,2 4,9* 27,0* 27,0* 14,9 18,1* 9,6 13,1* 6,5 9,9* 4,9* 4,9* 27,0* 27,0* 17,8* 18,1* 11,9 13,1* 8,1 9,9* 4,9* 4,9* 26’? 3” 15,1 27,8 8,4 14,1 5,2 8,7* 3,6 5,9* 28,8 29,6* 14,9 18,4* 9,2 13,3* 5,9* 5,9* 29,6* 29,6* 18,2* 18,4* 11,5 13,3* 5,9* 5,9* 24’? 6” 14,9 28,0 7,8 13,4 4,9 8,4 4,4 7,5 29,5 30,7* 14,2 18,3* 8,9 10,3* 7,8* 7,8* 30,7* 30,7* 18,2 18,3* 10,3* 10,3* 7,8* 7,8* 21’? 5” 14,4 19,2* 12,4 16,6* 19,2* 19,2* 16,6* 16,6* 19,2* 19,2* 16,6* 16,6* 11’? ?? Height????? Can?be?slewed?through?360°????? In?longitudinal?position?of?undercarriage????? Max.?reach?????*?Limited?by?hydr.?capacityThe lift capacities on the load hook of the Liebherr quick coupler 48 without grab attachment are stated in lb x 1,000 and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 360° with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/– 15°) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. The values apply when the adjusting cylinder is in the optimal position. Indicated loads comply with the ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity, or are limited by the permissible load of the load hook on the quick coupler (max. 26,455 lb). Without the quick coupler, lift capacities will increase by up to 498 lb. Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y V V V Y Y Y Y Y Y y y y Y V V Y V V Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y V V V Y Y Y Y Y Y y y y Y V y Y V y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y V V V Y Y Y Y Y Y y y v Y V y Y V y16 A 900 C LitronicBackhoe Bucketwith Mono Boom 16’5”ft m109876543210-1-2302520151050-5-10-15-3-4-5-6011 2 323456789100mft51015202530Buckets Machine stability per ISO 10567* (75 % of tipping capacity) Stabilizers Stabilizer blade + 4 pt. outriggers raised 2 pt. outriggers down down Stick length (ft in) Stick length (ft in) Stick length (ft in) 7’5” 8’ 8’8” 7’5” 8’ 8’8” 7’5” 8’ 8’8” in yd3 lb19.7”2) 0.42 63925.6”2) 0.59 88233.5”2) 0.78 94841.3”2) 1.05 1,12449.2”2) 1.24 1,23519.7”3) 0.42 72825.6”3) 0.59 97033.5”3) 0.78 1,05841.3”3) 1.05 1,25749.2”3) 1.24 1,38919.7”4) 0.44 61725.6”4) 0.59 83833.5”4) 0.85 90441.3”4) 1.11 1,08049.2”4) 1.37 1,168* Indicated loads are based on ISO 10567 and do not exceed 75 % of tipping or 87 % of hydraulic capacity, max. stick length without quick coupler, lifted 360° on firm with blocked oscillating axle1) comparable with SAE (heaped)2) Bucket with teeth 3) Bucket with teeth in HD-version 4) Bucket with cutting edge (also available in HD-version)Buckets with 19.7” cutting width with limited digging depthMax. material weight Y = = 3,034 lb/yd3, V = = 2,528 lb/yd3, y = = 2,023 lb/yd3, v = not authorizedCutting widthCapacity ISO 74511)WeightDigging Envelopewith Quick Coupler 1 2 3Stick length ft in 7’ 5” 8’ 8’ 8”Max. digging depth ft in 18’ 1” 18’ 8” 19’ 4”Max. reach at ground level ft in 28’10” 29’ 6” 30’ 2”Max. dumping height ft in 20’ 2” 20’ 6” 21’ Max. teeth height ft in 29’ 6” 29’10” 30’ 4”Min. attachment radius ft in 10’10” 10’ 10’ WeightsThe base machine weight with 8 tires plus intermediate rings, without mono boom, stick, quick coupler and bucket.Undercarriage versions WeightA 900 C litronic` with stabilizer blade + 2 pt. outriggers 33,400 lbA 900 C litronic` with 4 pt. outriggers 34,000 lbThe operating weight includes the basic machine with 8 tires plus intermediate rings, mono boom 16’5”, stick 8’8”, quick coupler 48 and bucket 41.3”/1.05 yd3.Undercarriage versions WeightA 900 C litronic` with stabilizer blade + 2 pt. outriggers 41,200 lbA 900 C litronic` with 4 pt. outriggers 41,400 lbDigging Forceswithout Quick Coupler 1 2 3Max. digging force (ISO 6015) lbf 18,210 17,085 19,096 lb 18,298 16,976 16,094Max. breakout force (ISO 6015) lbf 22,121 22,121 22,121 lb 22,046 22,046 22,046Max. breakout force with ripper bucket 28,259 lbf (28,219 lb) A 900 C Litronic 17Lift Capacitieswith Mono Boom 16’5”? Height????? Can?be?slewed?through?360°????? In?longitudinal?position?of?undercarriage????? Max.?reach?????*?Limited?by?hydr.?capacityThe lift capacities on the load hook of the Liebherr quick coupler 48 without grab attachment are stated in lb x 1,000 and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 360° with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/– 15°) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. Indicated loads comply with the ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity, or are limited by the permissible load of the load hook on the quick coupler (max. 26,455 lb). Without the quick coupler, lift capacities will increase by up to 498 lb.Stick 7’5” 10 ft 15 ft 20 ft 25 ft Under- ft carriage ft in Stabilizers raised Blade + 2 pt. down 30 4 pt. outr. down Stabilizers raised Blade + 2 pt. down 25 4 pt. outr. down Stabilizers raised Blade + 2 pt. down 20 4 pt. outr. down Stabilizers raised Blade + 2 pt. down 15 4 pt. outr. down Stabilizers raised Blade + 2 pt. down 10 4 pt. outr. down Stabilizers raised Blade + 2 pt. down 5 4 pt. outr. down Stabilizers raised Blade + 2 pt. down 0 4 pt. outr. down Stabilizers raised Blade + 2 pt. down – 5 4 pt. outr. down Stabilizers raised Blade + 2 pt. down – 10 4 pt. outr. down Stabilizers raised Blade + 2 pt. down – 15 4 pt. outr. down 5,7* 5,7* 4,5* 4,5* 5,7* 5,7* 4,5* 4,5* 5,7* 5,7* 4,5* 4,5* 20’? 6” 9,2 9,9* 5,8 9,2* 4,4* 4,4* 9,9* 9,9* 9,2* 9,2* 4,4* 4,4* 9,9* 9,9* 9,2* 9,2* 4,4* 4,4* 23’? 4” 15,3 20,1* 8,4 12,9* 5,5 9,0 3,8 4,5* 20,1* 20,1* 12,9* 12,9* 9,5 10,4* 4,5* 4,5* 20,1* 20,1* 12,9* 12,9* 10,4* 10,4* 4,5* 4,5* 24’10” 10,5* 10,5* 7,7 13,2 5,1 8,6 3,6 5,6* 3,6 4,9* 10,5* 10,5* 13,9 16,1* 9,1 11,9* 5,6* 5,6* 4,9* 4,9* 10,5* 10,5* 16,1* 16,1* 11,4 11,9* 5,6* 5,6* 4,9* 4,9* 25’? 2” 12,9 13,4* 7,2 12,7 4,9 8,3 3,7 5,7* 13,4* 13,4* 13,4 17,9* 8,8 12,9* 5,7* 5,7* 13,4* 13,4* 17,3 17,9* 11,1 12,9* 5,7* 5,7* 24’? 5” 13,0 20,4* 7,1 12,5 4,8 8,2 4,1 7,0 20,4* 20,4* 13,3 17,9* 8,7 12,9* 7,3* 7,3* 20,4* 20,4* 17,2 17,9* 11,0 12,9* 7,3* 7,3* 22’? 7” 13,4 23,6* 7,3 12,8 5,2 8,9 23,6* 23,6* 13,5 16,0* 9,5 11,6* 23,6* 23,6* 16,0* 16,0* 11,6* 11,6* 19’? 2”Stick 8’8” 10 ft 15 ft 20 ft 25 ft Under- ft carriage ft in Stabilizers raised Blade + 2 pt. down 30 4 pt. outr. down Stabilizers raised Blade + 2 pt. down 25 4 pt. outr. down Stabilizers raised Blade + 2 pt. down 20 4 pt. outr. down Stabilizers raised Blade + 2 pt. down 15 4 pt. outr. down Stabilizers raised Blade + 2 pt. down 10 4 pt. outr. down Stabilizers raised Blade + 2 pt. down 5 4 pt. outr. down Stabilizers raised Blade + 2 pt. down 0 4 pt. outr. down Stabilizers raised Blade + 2 pt. down – 5 4 pt. outr. down Stabilizers raised Blade + 2 pt. down – 10 4 pt. outr. down Stabilizers raised Blade + 2 pt. down – 15 4 pt. outr. down 4,3* 4,3* 4,3* 4,3* 4,3* 4,3* 17’? 7” 6,0 6,7* 3,8* 3,8* 6,7* 6,7* 3,8* 3,8* 6,7* 6,7* 3,8* 3,8* 22’? 1” 5,8 8,4* 3,6* 3,6* 8,4* 8,4* 3,6* 3,6* 8,4* 8,4* 3,6* 3,6* 24’? 8” 15,9 17,3* 8,6 11,8* 5,5 9,0 3,8 6,3 3,5 3,7* 17,3* 17,3* 11,8* 11,8* 9,5 9,8* 6,3* 6,3* 3,7* 3,7* 17,3* 17,3* 11,8* 11,8* 9,8* 9,8* 6,3* 6,3* 3,7* 3,7* 26’? 1” 13,4 14,4* 7,7 13,2 5,1 8,6 3,6 6,1 3,3 4,0* 14,4* 14,4* 14,0 15,2* 9,1 11,3* 6,5 7,9* 4,0* 4,0* 14,4* 14,4* 15,2* 15,2* 11,3* 11,3* 7,9* 7,9* 4,0* 4,0* 26’? 5” 12,7 13,7* 7,1 12,6 4,8 8,2 3,5 5,9 3,3 4,6* 13,7* 13,7* 13,4 17,4* 8,7 12,5* 6,3 7,4* 4,6* 4,6* 13,7* 13,7* 17,3 17,4* 11,0 12,5* 7,4* 7,4* 4,6* 4,6* 25’? 9” 12,7 18,8* 6,9 12,4 4,7 8,1 3,6 5,7* 18,8* 18,8* 13,1 17,9* 8,6 12,9* 5,7* 5,7* 18,8* 18,8* 17,0 17,9* 10,9 12,9* 5,7* 5,7* 24’? ? 13,0 24,9* 7,0 12,5 4,8 8,2 4,5 7,8 24,9* 24,9* 13,3 16,6* 8,7 11,7* 8,2 8,3* 24,9* 24,9* 16,6* 16,6* 11,0 11,7* 8,3* 8,3* 20’10” 13,8 18,3* 7,5 11,9* 7,3 11,4* 18,3* 18,3* 11,9* 11,9* 11,4* 11,4* 18,3* 18,3* 11,9* 11,9* 11,4* 11,4* 15’? 5”Stick 8’ 10 ft 15 ft 20 ft 25 ft Under- ft carriage ft in Stabilizers raised Blade + 2 pt. down 30 4 pt. outr. down Stabilizers raised Blade + 2 pt. down 25 4 pt. outr. down Stabilizers raised Blade + 2 pt. down 20 4 pt. outr. down Stabilizers raised Blade + 2 pt. down 15 4 pt. outr. down Stabilizers raised Blade + 2 pt. down 10 4 pt. outr. down Stabilizers raised Blade + 2 pt. down 5 4 pt. outr. down Stabilizers raised Blade + 2 pt. down 0 4 pt. outr. down Stabilizers raised Blade + 2 pt. down – 5 4 pt. outr. down Stabilizers raised Blade + 2 pt. down – 10 4 pt. outr. down Stabilizers raised Blade + 2 pt. down – 15 4 pt. outr. down 4,7* 4,7* 4,7* 4,7* 4,7* 4,7* 16’? 7” 6,0 6,4* 4,1* 4,1* 6,4* 6,4* 4,1* 4,1* 6,4* 6,4* 4,1* 4,1* 21’? 3” 5,8 8,8* 4,0* 4,0* 8,8* 8,8* 4,0* 4,0* 8,8* 8,8* 4,0* 4,0* 24’? ? 15,6 18,7* 8,5 12,3* 5,5 9,0 3,8 5,4* 3,6 4,1* 18,7* 18,7* 12,3* 12,3* 9,5 10,1* 5,4* 5,4* 4,1* 4,1* 18,7* 18,7* 12,3* 12,3* 10,1* 10,1* 5,4* 5,4* 4,1* 4,1* 25’? 5” 12,4* 12,4* 7,7 13,2 5,1 8,6 3,6 6,1 3,4 4,4* 12,4* 12,4* 14,0 15,6* 9,1 11,6* 6,5 7,1* 4,4* 4,4* 12,4* 12,4* 15,6* 15,6* 11,4 11,6* 7,1* 7,1* 4,4* 4,4* 25’? 9” 12,8 13,6* 7,2 12,6 4,8 8,3 3,5 5,6* 3,5 5,1* 13,6* 13,6* 13,4 17,6* 8,8 12,7* 5,6* 5,6* 5,1* 5,1* 13,6* 13,6* 17,3 17,6* 11,1 12,7* 5,6* 5,6* 5,1* 5,1* 25’? 1” 12,8 19,6* 7,0 12,5 4,7 8,2 3,9 6,4* 19,6* 19,6* 13,2 17,9* 8,7 12,9* 6,4* 6,4* 19,6* 19,6* 17,1 17,9* 10,9 12,9* 6,4* 6,4* 23’? 3” 13,2 24,3* 7,2 12,6 4,9 8,3 4,9 8,3 24,3* 24,3* 13,4 16,3* 8,8 9,9* 8,8 9,7* 24,3* 24,3* 16,3* 16,3* 9,9* 9,9* 9,7* 9,7* 20’? ? Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y y v v Y V y Y V y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y18 A 900 C LitronicClamshell Grabwith Two-piece Boom 11’10”Digging Envelopewith Quick Coupler 1 2 3Stick length ft in 7’ 5” 8’ 8’ 8”Max. digging depth ft in 22’ 4” 23’ 23’ 7”Max. reach at ground level ft in 29’ 2” 29’10” 30’ 6”Max. dumping height ft in 21’10” 22’ 4” 23’ Clamshell Model GM 8BMax. tooth force 11,690 lbf (11,684 lb)Max. torque of hydr. swivel 1,033 lbf ftClamshell Model GM 8B Machine stability per ISO 10567* (75 % of tipping capacity) Stabilizers Stabilizer blade + 4 pt. outriggers raised 2 pt. outriggers down down Stick length (ft in) Stick length (ft in) Stick length (ft in) 7’5” 8’ 8’8” 7’5” 8’ 8’8” 7’5” 8’ 8’8” in yd3 lb12.6”1) 0.22 1,56515.7”1) 0.29 1,65323.6”1) 0.39 1,65331.5”1) 0.52 1,76439.4”1) 1.05 1,98412.6”2) 0.22 1,67615.7”2) 0.29 1,78623.6”2) 0.39 1,83031.5”2) 0.52 1,962* Indicated loads are based on ISO 10567 and do not exceed 75 % of tipping or 87 % of hydraulic capacity, max. stick length without quick coupler, lifted 360° on firm with blocked oscillating axle1) without ejector2) with ejectorY = = 3,034 lb/yd3 max. material weightV = = 2,528 lb/yd3 max. material weighty = = 2,023 lb/yd3 max. material weightv = not authorizedWidth of shellsCapacityWeight0123456789 m0 ft510152025300-1-2-3-4-5-60-5-10-15123456789m51015202530ft12 3-7-2010-8-2510WeightsThe base machine weight with 8 tires plus intermediate rings, without two-piece boom, stick, quick coupler and clamshell.Undercarriage versions WeightA 900 C litronic` with stabilizer blade + 2 pt. outriggers 33,400 lbA 900 C litronic` with 4 pt. outriggers 34,000 lbThe operating weight includes the basic machine with 8 tires plus intermediate rings, two-piece boom 11’10”, stick 8’8”, quick coupler 48 and clamshell model GM 8B/0.52 yd3 (31.5” without ejector).Undercarriage versions WeightA 900 C litronic` with stabilizer blade + 2 pt. outriggers 42,500 lbA 900 C litronic` with 4 pt. outriggers 42,800 lb Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y V y y Y Y V Y Y V Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y V Y Y Y Y Y Y A 900 C Litronic 19Clamshell Grabwith Two-piece Boom 11’10”Clamshell Model GM 10B Machine stability per ISO 10567* (75 % of tipping capacity) Stabilizers Stabilizer blade + 4 pt. outriggers raised 2 pt. outriggers down down Stick length (ft in) Stick length (ft in) Stick length (ft in) 7’5” 8’ 8’8” 7’5” 8’ 8’8” 7’5” 8’ 8’8” in yd3 lb12.6”1) 0.22 1,69815.7”1) 0.29 1,80823.6”1) 0.46 1,89631.5”1) 0.59 2,00639.4”1) 0.78 2,13812.6”2) 0.22 1,80815.7”2) 0.29 1,94023.6”2) 0.46 2,09431.5”2) 0.59 2,227* Indicated loads are based on ISO 10567 and do not exceed 75 % of tipping or 87 % of hydraulic capacity, max. stick length without quick coupler, lifted 360° on firm with blocked oscillating axle1) without ejector2) with ejectorY = = 3,034 lb/yd3 max. material weightV = = 2,528 lb/yd3 max. material weighty = = 2,023 lb/yd3 max. material weightv = not authorizedWidth of shellsCapacityWeight0123456789 m0 ft510152025300-1-2-3-4-5-60-5-10-15123456789m51015202530ft12 3-7-2010-8-2510Digging Envelopewith Quick Coupler 1 2 3Stick length ft in 7’ 5” 8’ 8’ 8”Max. digging depth ft in 22’ 4” 23’ 23’ 7”Max. reach at ground level ft in 29’ 2” 29’10” 30’ 6”Max. dumping height ft in 21’10” 22’ 4” 23’ Clamshell Model GM 10BMax. tooth force 16,411 lbf (16,314 lb)Max. torque of hydr. swivel 1,298 lbf ftWeightsThe base machine weight with 8 tires plus intermediate rings, without two-piece boom, stick, quick coupler and clamshell.Undercarriage versions WeightA 900 C litronic` with stabilizer blade + 2 pt. outriggers 33,400 lbA 900 C litronic` with 4 pt. outriggers 34,000 lbThe operating weight includes the basic machine with 8 tires plus intermediate rings, two-piece boom 11’10”, stick 8’8”, quick coupler 48 and clam shell model GM 10B/0.59 yd3 (31.5” without ejector).Undercarriage versions WeightA 900 C litronic` with stabilizer blade + 2 pt. outriggers 42,800 lbA 900 C litronic` with 4 pt. outriggers 43,000 lb Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y y y y Y V y Y V y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y20 A 900 C LitronicClamshell Grabwith Mono Boom 16’5”Clamshell Model GM 8B Machine stability per ISO 10567* (75 % of tipping capacity) Stabilizers Stabilizer blade + 4 pt. outriggers raised 2 pt. outriggers down down Stick length (ft in) Stick length (ft in) Stick length (ft in) 7’5” 8’ 8’8” 7’5” 8’ 8’8” 7’5” 8’ 8’8” in yd3 lb12.6”1) 0.22 1,56515.7”1) 0.29 1,65323.6”1) 0.39 1,65331.5”1) 0.52 1,76439.4”1) 1.05 1,98412.6”2) 0.22 1,67615.7”2) 0.29 1,78623.6”2) 0.39 1,83031.5”2) 0.52 1,962* Indicated loads are based on ISO 10567 and do not exceed 75 % of tipping or 87 % of hydraulic capacity, max. stick length without quick coupler, lifted 360° on firm with blocked oscillating axle1) without ejector2) with ejectorY = = 3,034 lb/yd3 max. material weightV = = 2,528 lb/yd3 max. material weighty = = 2,023 lb/yd3 max. material weightv = not authorizedWidth of shellsCapacityWeight0123456789 m0 ft510152025300-1-2-3-4-5-60-5-10-1512345678m510152025ft12 3-7-20930-8-25Digging Envelopewith Quick Coupler 1 2 3Stick length ft in 7’ 5” 8’ 8’8”Max. digging depth ft in 22’ 22’ 8” 23’4”Max. reach at ground level ft in 28’ 3” 28’10” 29’6”Max. dumping height ft in 17’11” 18’ 3” 18’8”Clamshell Model GM 8BMax. tooth force 11,690 lbf (11,684 lb)Max. torque of hydr. swivel 1,033 lbf ftWeightsThe base machine weight with 8 tires plus intermediate rings, without mono boom, stick, quick coupler and clamshell.Undercarriage versions WeightA 900 C litronic` with stabilizer blade + 2 pt. outriggers 33,400 lbA 900 C litronic` with 4 pt. outriggers 34,000 lbThe operating weight includes the basic machine with 8 tires plus intermediate rings, mono boom 16’5”, stick 8’8”, quick coupler 48 and clamshell model GM 8B/0.52 yd3 (31.5” without ejector).Undercarriage versions WeightA 900 C litronic` with stabilizer blade + 2 pt. outriggers 41,900 lbA 900 C litronic` with 4 pt. outriggers 42,100 lb Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y V V V Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y A 900 C Litronic 21Clamshell Grabwith Mono Boom 16’5”Clamshell Model GM 10B Machine stability per ISO 10567* (75 % of tipping capacity) Stabilizers Stabilizer blade + 4 pt. outriggers raised 2 pt. outriggers down down Stick length (ft in) Stick length (ft in) Stick length (ft in) 7’5” 8’ 8’8” 7’5” 8’ 8’8” 7’5” 8’ 8’8” in yd3 lb12.6”1) 0.22 1,69815.7”1) 0.29 1,80823.6”1) 0.46 1,89631.5”1) 0.59 2,00639.4”1) 0.78 2,13812.6”2) 0.22 1,80815.7”2) 0.29 1,94023.6”2) 0.46 2,09431.5”2) 0.59 2,227* Indicated loads are based on ISO 10567 and do not exceed 75 % of tipping or 87 % of hydraulic capacity, max. stick length without quick coupler, lifted 360° on firm with blocked oscillating axle1) without ejector2) with ejectorY = = 3,034 lb/yd3 max. material weightV = = 2,528 lb/yd3 max. material weighty = = 2,023 lb/yd3 max. material weightv = not authorizedWidth of shellsCapacityWeight0123456789 m0 ft510152025300-1-2-3-4-5-60-5-10-1512345678m510152025ft12 3-7-20930-8-25Digging Envelopewith Quick Coupler 1 2 3Stick length ft in 7’ 5” 8’ 8’8”Max. digging depth ft in 22’ 22’ 8” 23’4”Max. reach at ground level ft in 28’ 3” 28’10” 29’6”Max. dumping height ft in 17’11” 18’ 3” 18’8”Clamshell Model GM 10BMax. tooth force 16,411 lbf (16,314 lb)Max. torque of hydr. swivel 1,298 lbf ftWeightsThe base machine weight with 8 tires plus intermediate rings, without mono boom, stick, quick coupler and clamshell.Undercarriage versions WeightA 900 C litronic` with stabilizer blade + 2 pt. outriggers 33,400 lbA 900 C litronic` with 4 pt. outriggers 34,000 lbThe operating weight includes the basic machine with 8 tires plus intermediate rings, mono boom 16’5”, stick 8’8”, quick coupler 48 and clamshell model GM 10B/0.59 yd3 (31.5” without ejector).Undercarriage versions WeightA 900 C litronic` with stabilizer blade + 2 pt. outriggers 42,100 lbA 900 C litronic` with 4 pt. outriggers 42,300 lb Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y y y v Y V y Y V y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y y y y Y Y V Y Y V Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y y y y Y V V Y V V Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y V V y Y Y V Y Y V Y Y V Y Y Y Y Y Y y y v Y V V Y V V Y Y Y Y Y Y Y Y Y y y y Y V V Y V V22 A 900 C LitronicAttachmentsDitchcleaning Buckets/Tilting BucketsDitchcleaning Buckets Machine stability per ISO 10567* (75 % of tipping capacity) Stabilizers Stabilizer blade + 4 pt. outriggers raised 2 pt. outriggers down down Stick length (ft in) Stick length (ft in) Stick length (ft in) 7’5” 8’ 8’8” 7’5” 8’ 8’8” 7’5” 8’ 8’8” in yd3 lbTwo-piece Boom 11’10”59.1”3) 0.65 94863.0”2) 0.72 1,52163.0”2) 1.05 1,87478.7”2) 0.65 1,52178.7”3) 0.63 88278.7”2) 0.92 1,940Mono Boom 16’5”59.1”3) 0.65 94863.0”2) 0.72 1,52163.0”2) 1.05 1,87478.7”2) 0.65 1,52178.7”3) 0.63 88278.7”2) 0.92 1,940Cutting widthCapacity ISO 74511)WeightTilting Buckets Machine stability per ISO 10567* (75 % of tipping capacity) Stabilizers Stabilizer blade + 4 pt. outriggers raised 2 pt. outriggers down down Stick length (ft in) Stick length (ft in) Stick length (ft in) 7’5” 8’ 8’8” 7’5” 8’ 8’8” 7’5” 8’ 8’8” in yd3 lbTwo-piece Boom 11’10”59.1”2) 0.78 1,49963.0”2) 1.05 1,808Mono Boom 16’5”59.1”2) 0.78 1,49963.0”2) 1.05 1,808* Indicated loads are based on ISO 10567 and do not exceed 75 % of tipping or 87 % of hydraulic capacity, max. stick length without quick coupler, lifted 360° on firm with blocked oscillating axle1) comparable with SAE (heaped)2) with 2 x 50° rotator3) rigid ditchcleaning bucketY = = 3,034 lb/yd3 max. material weightV = = 2,528 lb/yd3 max. material weighty = = 2,023 lb/yd3 max. material weightv = not authorizedCutting widthCapacity ISO 74511)Weight A 900 C Litronic 23EquipmentUndercarriage2-circuit brake system •Individual controllable outriggers +Tires Mitas EM 22 •Travel speed levels (four) •Piston rod protection support cylinders +Powershift transmission •Parking brake, maintenance-free •Tire variants, various +Pipe fracture safety on support cylinders •Custom paintwork undercarriage +Speeder •Tool box on both sides, lockable •Central lubrication undercarriage +Operator’s CabHour meter, readable from the outside •Roof window •Travel alarm •Fire extinguisher •Bottle holder •FOPS cab protection system +Slide-in front window •Floor mat removable •Display, large, for all indicating, monitoring and warning functions •Coat hook •Automatic climate control •Consoles and seat adjustable separately or in combination •Cooler, electrical +Steering column adjustable horizontally •LiDAT +Liebherr proportional controls +Automatic engine shutdown (time adjustable) +Bullet proof glass (front and top) +Radio system +Smokers package •Rear view camera +Back-up alarm +Beacon +Tinted glass •Windshield washer •Rear wiper +Wiper lower front window +Sliding window in the door •Sun roller blind •Auxiliary heater with timer +Immobilizer electronic (key code) +Xenon headlights (front resp. rear) +Auxiliary headlights (front resp. rear) +UppercarriageRefueling pump, electrical +Main battery switch for electrical system •Engine hood with gas spring •Uppercarriage doors, lockable •Uppercarriage swing lock electro-hydraulically activated from the cab •Beacon on engine hood +Custom paintwork uppercarriage +Power socket 12 V, 20 A +Central lubricating system, automatic +Central lubricating system, semi-automatic •HydraulicsShutoff valve between hydraulic tank and pump(s) •Pressure test fittings •Accumulator for controlled lowering of the attachment with the engine shut down •Hydraulic oil from – 4 °F to + 104 °F •Hydraulic oil filter with integrated microfilter •Hydraulic oil pre-heating +Liebherr hydraulic oil, biologically degradable +Liebherr hydraulic oil, specially for warm and cold regions +Mowing bucket and mulcher operation +Bypass filter +Change-over for controls (hammer/shear operation via pedals or joystick) +AttachmentSlope attachment +Function hammer/shear operation incl. tubing +Grapple sticks +Hoist limitation, electronic +Piston rod protection bucket cylinder +Piston rod protection stick cylinder +Load hook on stick +Shackle on stick +Leak oil line, additional for working tools +Liebherr ditchcleaning bucket +Liebherr pallet forks +Liebherr quick coupler, hydraulic or mechanical +Liebherr tilting bucket +Liebherr tilt rotator +Liebherr sorting grapple +Liebherr backhoe bucket +Liebherr tooth system +Liebherr clamshell grab +LIKUFIX, coupling hydraulic tools from the cab +Mono boom +Mono boom, stretched +Multi-User attachment +Pipe fracture safety boom cylinders •Pipe fracture safety stick resp. bucket cylinder +Hose quick coupling at end of stick •Custom painting for tools +Tool Control, 10 tool adjustments selectable over the display +Tool Management, fully automatic tool recognition +Overload warning device •Bottom chord protection for stick +Two-piece boom +Central lubricating system, expanded for connecting link +Central lubrication for quick coupler +EngineFuel theft protection +Fuel preheating +Coolant preheating +Liebherr particle filter +Fan drive, reversible +Air pre-cleaner + • = Standard, + = OptionOptions and/or special attachments, supplied by vendors other than Liebherr, are only to be installed with the knowledge and approval of Liebherr in order to retain warranty.The Liebherr Group of CompaniesWide Product RangeThe Liebherr Group is one of the largest construction equipment manufacturers in the world. Liebherr’s high-value products and services enjoy a high reputation in many other fields. The wide range includes domestic appliances, aerospace and transportation systems, machine tools and maritime cranes.Exceptional Customer BenefitEvery product line provides a complete range of models in many different versions. With both their technical excel lence and acknowledged quality, Liebherr products offer a maximum of customer benefits in practical application.State-of-the-art TechnologyTo provide consistent, top quality products, Liebherr attaches great importance to each product area, its components and core technologies. Important modules and components are developed and manufactured in-house, for instance the entire drive and control techno logy for construction equipment and mining trucks.Worldwide and IndependentHans Liebherr founded the Liebherr family company in 1949. Since that time, the enterprise has steadily grown to  a  group of more than 120 companies with over 35,000 employees located on all continents. The corporate headquarters of the Group is Liebherr-International AG in Bulle, Switzerland. The Liebherr family is the sole owner of the company.www.liebherr.usPrinted in Germany by Typodruck RG-BK-RP LHB/VF 10472023-0.3-09.12_enUSLiebherr?Construction?Equipment?Co.4100 Chestnut Avenue, Newport News, VA 23607, USA ? +1 (757) 245 5251, Fax +1 (757) 928 8701www.liebherr.us, E-Mail: info.lce@liebherr.comAll illustrations and data may differ from standard equipment. Subject to change without notice.