Camos - Model CS-I280HM - Multi View Camera - User Manual

INSTRUCTION MANUALCM-840D/CM-1040DThank you for choosing this product.Please read this instruction manual carefully beforeoperating this product.8.4"/ 10.4" TFT LCD DIGITAL MONITORMODE MENU DOWN UP POWERDIGITAL TFT LCD COLOR MONITORPrinted in KOREAPOWER TV/AVRECALL SLEEPMUTEAUTOPICPICTURE SETUP SOUNDA.MEMO. CH.SET1 2 34 5 67 8 90CHCHVOL VOLMENUContents1. Safety Rules2.3.4. Terms of part5. Remote Control6. Functions7. Connections8.9.Before UseSpecial Features of the productChanging Remote Control BatterySpecifications38101112142325261. Safety RulesPlease read the Safety Rules carefully before using this product. Following of the safety rules prevents users from any damagerelated with the misuse of this product.It is very important that users follow these safety rules. We state Caution and Warning to clarify any potential for damageassociated with misuse of the product.“ ”“ ” “ ”About signs“Do not”WarningMay cause bodily harm or even death if users ignorewarnings in the safety rules.May cause bodily harm or even death if users ignorecautions in the safety rules.Caution“Precautions”“Follow directions carefully”WarningPlace the product where it doesn’t prevent the driver from driving.--- The driver’s view of sight should not be blocked.Do not watch or operate the product while driving.--- This may cause a major accident.Do not place the product near the passenger-side airbag.--- Airbags may not operate properly or may cause personal damageand accident when accidentally opening.Do not get product wet and operate with wet hands.--- This may cause electric shock. 3CautionKeep electric cord properly positioned.An improperly positioned electric cord may cause fire or electric shock when metal material is in contact with the power source.---Clean electric socket area often.Dust in the area may cause fire.---Always clean the cigarette lighter socket before using product.Bad connection may cause fire.---Do not press or drop LCD panel.You should not give any shock on LCD panel because it may cause damage.---Do not place electric cord near a heating product.The cord surface may melt and cause fire and/or electric shock.---Do not put the product in an unstable place where the product may be exposed to shock and/or impact.The product may fall and be damaged.---Do not place the product where high temperature and/or the direct ray of the sun occurs.--- This may cause fire, electric shock and/or malfunction.Do not put the product in a place where sudden temperature increase occurs such as the vehicle’s dashboard.This may cause electric shock and/or malfunction. You should request an authorized service dealer for any inspection andrepair of the product.Do not attempt to open, disassemble or repair the product by any person except an authorized service dealer.---Do not use non-specified double socket and extended car battery cord.This may cause excess heat and/or fire.---Be careful when thunder and lighting occurs.There is a danger of electric shock.---Stop using the product immediately when you drop it or damage the outside shell.Continuous use may cause fire, electric shock and/or malfunction.---Do not place any containers with water or any small metal objects on top of the product or nearby it.Unplug the product when water or metal comes in contact with the product. Continuous use may cause fire,electric shock and/or malfunction.---Do not put pins or needles into the product or electric cord of product.If this happens, stop the product operation immediately. Continuous use may cause fire, electric shock and/or malfunction.---This may cause fire and/or electric shock.Do not use damaged electric cord.---Do not damage or bend electric cord. Do not place heavy objects on electric cord.This may cause fire from electric sparks.---Do not use unapproved Cigarette Lighter Adapter.This may cause fire ,electric shock and/or malfunction.---This may cause fire or electric shock.Do not use unapproved power voltage.---Do not use in bathtub. Do not pull the plug with wet hands.This may cause electric shock.---4 5Do not place volatile materials such as insecticides on the product. The product should not come in contact with rubberor vinyl for a long period of time.The surface of the product may change and paint may peel off.---When you transport the product, remove all cords and do not give any shock.This may cause a malfunction.---Do not watch Monitor for a long period of time.This may damage your eyesight.---Unplug the product when you clean or care for it.Not unplugging product may cause electric shock.---Unplug the product when you don't use it for a long period of time.Insulation may cause electric shock, electric leak and/or fire.---Hold the plug when you unplug the product. Put a battery in the remote control properly with +, - signs as directedin this manual.Improper use of batteries may cause fire and/or damage.---Do not pull the cord line when you unplug it.Damaged cords may cause fire and/or electric shock.---The car engine should be running when you use the product in a car.Without the engine running, you may have excessive discharge of the car battery.---Unplug the product and remove cords when moving.--- It may damage cords and cause fire and/or electric shock.If you find any strange occurrences or malfunction in the product or any foreignsubstance gets into the product, please contact the authorized retailer where youpurchased the product.---Do not use the product in the following locations.This may cause malfunction.In direct rays of the sun and near heating productsHigh in humidity and with bad ventilationDusty or oily locationsLow temperaturesUnstable environment??????6 72. Before UseTo safely use the product, please read the user’s manual carefully before use.??Any liquid leaking into product may cause malfunction.?When you install the product in a car and watch TV, the car engine should be running as there might occur excessivedischarge of the car battery.?When you install the product in a car, do not set a volume level too loud for others to hear outside.?Do not disassemble and modify the product in any way. This may cause fire and/or electric shock.?Screen may be a little dark when the product is operated in low temperature areas. Screen will be shown normalluminosity after a few minutes.?Use the product at the temperature range of 0 C ~ 50 C .O O?Do not touch the LCD panel.?Connect all lines as directed in the product connection map in the manual.?Cover the product when exposed to direct rays of the sun for a long period of time.(You should keep the product at a temperature range of -20 ~ 60 .)? ??The product should not be placed on the dashboard or near engine?Be cautious of humidity and shock when you use the product in a car.?Follow traffic laws when you use the Navigation Route System.?Quality of pictures on screen may vary depending on the radio field strength in different locations.You should use video equipment where you experience weak radio field strength.?The driver should not use the product while he/she is driving.Precautions (when you use the product in a car)8 93. Special Features of the Product?????????????Applied high resolution and low reflection DIGITAL TFT LCD (800 x 600)All electronic control functionsConvenient Graphic OSDSystem auto recognition function (PAL/ NTSC/ AUTO)PC(RGB) auto adjustment7 Languages display(English, French, German, Spanish, Italian, Japanese, Korean)PC(RGB )/ AV / S-VIDEO selection functionW speaker built-inSTAND BY FunctionfunctionAll functions are displayed on screen (OSD function)One-touch Dimmer (Remote control)0.5Low Power consumptionAudio mute (Remote control)4. Terms of part10 11MODE MENU DOWN UP POWERDIGITAL TFT LCD COLOR MONITOR??????? MODE AV/S-VIDEO/PC(RGB) selection function. Press the modebutton to be appeared source select OSD box and pressthe DOWN, UP button or mode button repeatedly th pressthe menu button or wait 3 second to select highlighted source.?~If PC cture size does not match with full horizontal or vertical screen size,press the mode button continuously(2 3 second) and wait for a little whilethen you can see the most appropriate screen.? MENU Button to Setup Screen and Function.Press the menu button to beappeared Menu OSD box and press the mode button repeatedlyto select the main menu(Picture menu, Setup menu, Audio menu),then press the DOWN or UP button to enter to sub menu, press themode button repeatedly to highlight icon that user wants, press theDOWN, UP button to increase, decrease or change the function.Push the Menu button once to return to the main menu to selectanother function or press twice to exit from the OSD.? DOWN Select the sub menu, decrease the selected function, hot keyfor volume down? UP Select the sub menu, increase the selected function, hot keyfor volume up? POWER ON/OFF button.? Remote Sensor Window Sensor for receiving signal from the remote control.5. Remote ControlPOWER TV/AVRECALL SLEEPMUTEAUTOPICPICTURE SETUP SOUNDA.MEMO. CH.SET1 2 34 5 67 8 90CHCHVOL VOLMENU? ?? ????????????The key does not use (only TV MODE)DSUB analog, external video, s-videoSetup selection buttonThe key does not use (only TV MODE)Sound selection buttonThe key does not use (only TV MODE)The key does not use (only TV MODE)? POWER Power ON/OFF Key? TV/AV? RECALL? SLEEP? MENU? ??VOL? ??CH? AUTO PIC? MUTE? SETUP? PICTUREDisplays present status and volume levelSelects menu and changes functionControls Volume and changes MENU levelSelects channel and moves to MENUSelects DYNAMIC, NORMAL, MILD, USER for PICTUREFor muting soundReturns to the previous sound level when you push again? SOUND? 0~9KEY? A.MEMO.? CH.SETPicture selection button12 136. FunctionsPOWER (POWER)?( ), it means a remote control button.??Push POWER(POWER) button POWER is on..Push POWER (POWER) button again. POWER is OFF.MODE(TV/AV)? DSUBIt is function to change external video signals to ANALOG/ VIDEO/ S-VIDEOAV/ S-VIDEODSUB ANALOG/21?POWER ON/OFF KEYMENU (MENU)3DSUB ANALOGAVS-VIDEOBRIGHTNESSCONTRASTSHARPNESSCOLOR TINTCOLOR TONESYSTEM AUTO NTSC PALPICTURE(PICTURE)? BRIGHTNESS Adjust the brightness of video without affecting RGB’s brightness.?Press MENU button to go to the Main menu.MENU? CONTRAST Adjust the contrast of video without affecting RGB’s contrast.? SHARPNESS Adjust the sharpness of video image.? COLOR TINT Change the richness of color.? COLOR TONE Change the tone of color.Change broadcast system NTSC, PAL, AUTO? SYSTEMAV1/ AV2DSUB ANALOG/ DVI DIGITAL/AV/ S-VIDEO554014601514DSUB ANALOGAV1AV2? ??)Adjust it with CH (CM-840D/ 1040DCM-? ? ,With ( VOL ) go to SUB MENU. After adjusting in SUB MENU,press MENU to exit.? ,With MODE go to SUB MENU. After adjusting in SUB MENU,press MENU to exit.?Adjust it with Mode (key button)CM-840D/ 1040DCM-SETUP(SETUP)LANGUAGEOSD TIMEOSD H POS.OSD V POS.FACTORY RESET? ENGLISHOFF? LANGUAGE Change language English, German , Italian, Japanese, Korean., , SpanishFrench? OSD TIME The number of seconds that the OSD will remain visible before disappearing.? TRANSLUCENT Change the opaqueness of the background of the OSD.? OSD H POS. Move the OSD Window to the horizontal direction.? OSD V POS. Move the OSD Window to the vertical direction.? FACTORY RESET A factory default reset will clear all of OSD information.TRANSLUCENT?Press MENU button to go to the Main menu.MENUMUTE OFFVOLUMESOUND(SOUND)Mute the sound temporarily. Mute is released when you change channel and adjust volume.Adjust the sound volume.? MUTE? VOLUMETREBLEBASS5050Emphasize high frequency audio.Emphasize low frequency audio.? TREBLE? BASS?Press MENU button to go to the Main menu.MENU101410? ?),With (VOL go to SUB MENU. After adjusting in SUB MENU,press MENU to exit.? ?),With (VOL go to SUB MENU. After adjusting in SUB MENU,press MENU to exit.17161918PICTUREBRIGHTNESSCONTRASTH POSITIONV POSITIONPHASEPIXEL FREQ.Adjust the brightness of video without affecting RGB s brightness.? BRIGHTNESSAdjust the contrast of video without affecting RGB s contrast.? CONTRASTAdjust the horizontal position of the image.? H POSITIONAdjust the vertical position of the image.? V POSITIONRemove the noises. When phase value is wrong, the image has vertical lines especially in 1 dot on and off.? PHASEAdjust the sampling frequency of DSUB analog signal.? PIXEL FREQ.?Press MENU button to go to the Main menu.MENUPC (ANALOG)755014100? ?),With (VOL go to SUB MENU. After adjusting in SUB MENU,press MENU to exit.REDGREENBLUEThe tone of color can be changed from red-dish white to bluish white.The individual color components are also user customizable.COLOR? 9300K Change color temperature : Red 42 Green 52 Blue 50?7300K Change color temperature : Red 51 Green 46 Blue 46?6500K Change color temperature : Red 40 Green 54 Blue 54?USER User customizable. (RED, GREEN, BLUE)?Press MENU button to go to the Main menu.MENUUSER? ?),With (VOL go to SUB MENU. After adjusting in SUB MENU,press MENU to exit.2120DISPLAY MODESMode ResolutionHorizontalF equency(KHz)rVerticalF equency(Hz)rPixel ClockF equency(MHz)rSync Polarity(H/V)VGA720 x 400 31.469 70.087 28.322 - / +640 x 480 31.469 59.940 25.175 - / -640 x 480 37.500 75.000 31.500 - / -+ / +40.00060.30037.880800 x 600+ / +49.50075.00046.875800 x 600SVGAFor the display modes listed below, the screen image has been optimized during manufacture.MUTEIt is a function of Mute control.When you push MUTE button, OSD display this image.This image can be toggle.RECALL Displays present status and volume level.4AUTO PIC Selects DYNAMIC, NORMAL, MILD, USER for PICTURE56 TV/AV External video, s-videoDSUB analog,72322OUT OF RANGE ? The screen shows this when signal is out of range? The screen shows when there is no signal.thisNO SIGNAL? The screen shows when the signal cable is not connected.thisCHECK CABLEOSD MESSAGE7. ConnectionsControl Knob(Angle)Fix Knob(Bracket)Tapping screewSafeguard tapeStand Base1. Choose a location where you install the Monitor.Clean the place for the Stand with cleanser and remove thetape. And then attach it exactly where you want.2. Fasten the Monitor with Tapping Screw.3. Adjust angle of Stand and install Monitor.4. Connect each connecting cable as in the product installationreference.Safeguard825248. Changing Remote Control Battery1. Slide and open the battery cover.2. Insert new battery and ensure that thepolarities are correct when inserting.3. Slide and close the battery cover.CM-840D/1040DMonitor Cable(Not Supplied)P.C(Not Supplied)DVDPCigarette Lighter Adaptor(DC 12V)(S-Audio in)(V-input)(A-input)TV TUNER BOX(Not Supplied)27269. Specifications21.336 cm (8.4 Inch)Size250 : 1Contrast ratio(CR)LCD Panel170.5(W) x 128.4(H) mm6.712(W) x 5.055(H) inchActive area+55deg / 35deg / 35degView angle(H/U/D)300cd/?Brightness0.212(W) x 0.212(H) mm0.008(W) x 0.008(H) inchDot pitch480,000Pixels 800(W) x 600(H) DotsDisplay format10.8 Watt MAXDC12VDC12VTTL Separate ,CompositeNTSC / PAL / AUTOVoltageConsumptionPower supply7 LanguagesCM-840D(8.4”)I T E MRear Input PowerSPECIFICATIONNTSC PALInput systemOSD DisplayInput synchronous15.73KHzHorizontalFrequencyPOWER on/off, MENU , MODEPRO up/downUser controlsRegulationMono Input 400 mVrmsAudioAnalog RGB 0.7Vp-pComposite VIDEO, S-VIDEO (75 ohm 1Vp-p)Video60 HzVertical-10 C to + 50 Co o o o(+32 F to +122 F)-20 C to + 60 Co o o o( -4 F to +140 F)FCC, E-MARKRemote controller (with Battery)Monitor cable Ass'yCigarette lighter adaptor(Fuse 2A)Stand Ass'y(with Acc'y)223 (W) x 178 (H) x 34.5 (D)mmOperating temperatureI T E MStorage temperatureSPECIFICATIONNTSC PALDimension ( W x H x D )AccessoriesInput signal15.63KHz50 HzSound signal 0.5 Watt max8.78(W) x 7.01(H) x 1.36(D) inch1.2Kg (2.645 lbs) (Exclude Monitor Bracket)Weight2928CM-1040D(10.4”)15.73KHzHorizontalFrequencyPOWER on/off, MENU , MODEPRO up/downUser controlsRegulationMono Input 400 mVrmsAudioAnalog RGB 0.7Vp-pComposite VIDEO, S-VIDEO (75 ohm 1Vp-p)Video60 HzVertical-10 C to + 50 Co o o o(+32 F to +122 F)-20 C to + 60 Co o o o( -4 F to +140 F)FCC, E-MARKRemote controller (with Battery)Monitor cable Ass'yCigarette lighter adaptor(Fuse 2A)Stand Ass'y(with Acc'y)254 (W) x 202 (H) x 29 (D)m/m10.0(W) x 7.95(H) x 1.14(D) inchOperating temperatureI T E MStorage temperatureSPECIFICATIONNTSC PALDimension ( W x H x D )AccessoriesInput signal15.63KHz50 HzSound signal 0.5 Watt max1.5Kg (3.3 lbs) (Exclude Monitor Bracket)Weight26.416 cm (10.4 Inch)Size400 : 1Contrast ratio(CR)LCD Panel211.7(W) x 158.4(H) mm8.334(W) x 6.236(H) inchActive area+55deg / 40deg / 40degView angle(H/U/D)220 cd/?Brightness0.264(W) x 0.264(H) mm0.010(W) x 0.010(H) inchDot pitch480,000 Pixels 800(W) x 600(H) DotsDisplay format9.6 Watt MAXDC12VDC12VTTL Separate ,CompositeNTSC / PAL / AUTOVoltageConsumptionPower supply7 LanguagesI T E MRear Input PowerSPECIFICATIONNTSC PALInput systemOSD DisplayInput synchronousCaution: The design and specifications of this product in order to improve its quality may be changed without notice.MEMOMEMO