Carten Duplex Series Ultra-High Purity Duplex Diaphragm Valves Brochure

Ultra-High Purity Diaphragm Valves (DPC) Ultra-High Purity Bellows Valves (DFC) Ultra-High Purity Block Bellows Valves (DBC)Duplex seriesDPC Series Typical Valve DimensionsHHH/2H/2GGOPENDD BSeeDuplex TeeNote 32.982 PL.2.982 PL.FFJJBEKE/2EK ±0. 12E/2ØCØC ØA1.711.711.241.24 2.981.001.002.002.982 PL.L2.00DUPLEX TEE NOTE: This tube stub is not applicablefor the DPT version.Ø A±0. 12±0. 12MAIN-INLETBRANCH-OUTLETBRANCH-OUTLETMAIN-INLETOPENBRANCH-OUTLETBRANCH-OUTLETDPC 750/500 (DUPlex CroSS)DPV 750/500 (DUPlex VerTiCal)DPC Series Technical DataMaterial of ConstruCtionWetted areas elgiloy, 316l stainless steel, PCtfenon-Wetted areas 316l stainless steel, 303 stainless steelMaXiMuM oPeratinG Pressure DPC series Vacuum to 375 psig (25.8 bar)oPeratinG teMPerature ranGe DPC series -22º f (-30ºC) to 180º f (82ºC)floW CoeffiCent (Cv)DPC series 2.96DPV/DPt series 3.10HeliuM leaK testinboardacross the seatoutboard Pressure test1 x 10-11 Pa.m 3/s (1 x 10-10 atm.cc (He) /s)1 x 10-10 Pa.m 3/s (1 x 10-9 atm.cc (He) /s)1 x 10-7 Pa.m 3/s (1 x 10-6 atm.cc (He) /s)Cleanlinessassembled and tested in Class 10 cleanroom. Purged and final packaged in Class 1 cleanroom. Double-bag packaging (2 mil nylon inner bag, 6 mil polyethylene outer bag) with ultra-High Purity n2 gas environment.stanDarD finisH electropolished to 10 ra Max (0.25 µm) on all wetted surfacesoPtionssurface finish - 10 ra, 20 ra, 25 ra eP, 20 ra BaParticle, moisture, tHC and o2 testingseM and esCa testing, auger analysisPneumatic actuators available-types: nC/no/Dafitting connections available for up to 1.00” size – inlet/outletMaterial: Vespel® seatHandle color (std. white)Jis tube stubs and tube lengthspecifications are subject to change without notice. Vespel® is a registered trademark of the DuPont Company. DPC Series Technical Dimensionssize a B C D e f G H J K lDPC/DPV 750/500 Ø 0.75(19.1mm)0.065(1.6mm)Ø 0.50(12.7mm)0.049(1.2mm)4.16(105.6mm)0.75(19.1mm)3.81(96.7mm)1.50(38.1mm)1.92(48.8mm)10.10(256.5mm)7.94(201.6mm)DPC/DPV 750/750 Ø 0.75(19.1mm)0.065(1.6mm)Ø 0.75(19.0mm)0.065(1.6mm)4.16(105.6mm)0.75(19.1mm)3.81(96.7mm)1.50(38.1mm)1.92(48.8mm)10.10(256.5mm)7.94(201.6mm)DPC/DPV 1000/500 Ø 1.00(25.4mm)0.065(1.6mm)Ø 0.50(12.7mm)0.049(1.2mm)4.16(105.6mm)0.75(19.1mm)3.81(96.7mm)1.50(38.1mm)1.92(48.8mm)10.10(256.5mm)7.94(201.6mm)DPC/DPV 1000/750 Ø 1.00(25.4mm)0.065(1.6mm)Ø 0.75(19.0mm)0.065(1.6mm)4.16(105.6mm)0.75(19.1mm)3.81(96.7mm)1.50(38.1mm)1.92(48.8mm)10.10(256.5mm)7.94(201.6mm)DPC/DPV 1500/500 Ø 1.50(38.1mm)0.065(1.6mm)Ø 0.50(12.7mm)0.049(1.2mm)4.86(118.4mm)1.13(28.7mm)4.42(112.2mm)2.00(50.8mm)2.55(64.7mm)10.58(268.7mm)7.94(201.6mm)DPC/DPV 1500/750 Ø 1.50(38.1mm)0.065(1.6mm)Ø 0.75(19.0mm)0.065(1.6mm)4.86(118.4mm)1.13(28.7mm)4.42(112.2mm)2.00(50.8mm)2.55(64.7mm)10.58(268.7mm)7.94(201.6mm)DPC/DPV 2000/500 Ø 2.00(50.8mm)0.065(1.6mm)Ø 0.50(12.7mm)0.049(1.2mm)4.86(118.4mm)1.13(28.7mm)4.42(112.2mm)2.00(50.8mm)2.55(64.7mm)10.58(268.7mm)9.92(251.9mm)DPC/DPV 2000/750 Ø 2.00(50.8mm)0.065(1.6mm)Ø 0.75(19.0mm)0.065(1.6mm)4.86(118.4mm)1.13(28.7mm)4.42(112.2mm)2.00(50.8mm)2.55(64.7mm)10.58(268.7mm)9.92(251.9mm)sizeDimension “D”fsM-M fsM-f sWG500 1.54(39.1mm)1.54(39.1mm)2.10(53.3mm)750 2.04(51.8mm)2.04(51.8mm)2.03(51.6mm)1000 2.36(59.9mm)2.36(59.9mm)2.49(63.2mm)oPTional ValVe enD ConneCTionSAvAilAble on DPC boDy sizesreV 2010Carten Controls, A division of Fujikin 604 W. Johnson avenue, Cheshire, Ct 06410 phone: 203-699-2100 | fax: 203-699-2179www.cartenus.comnote 1: all tolerances are ±0.06 in. (±1.52mm) unless otherwise stated. note 2: Dimensional drawings shown are for reference only. Please contact Carten® for customer drawings.note 3: this tube stub is not applicable for the DPt version.DBC Series Typical Valve Dimensions DBC 2000/1000note 1: all tolerances are ±0.06 in. (±1.52mm) unless otherwise stated. note 2: Dimensional drawings shown are for reference only. Please contact Carten® for customer drawings.DBC Series Technical DataMaterial of ConstruCtionWetted areas 321, 316l stainless steel, PCtfenon-Wetted areas 316l stainless steel, nickel foil, 303 stainless steelMaXiMuM oPeratinG Pressure uBC series Vacuum to 375 psig (25.8 bar)MaXiMuM oPeratinG teMPerature uBC series -22º f (-30ºC) to 180º f (82ºC)floW CoeffiCient (Cv)DBC 1000/750DBC 1500/750DBC 1000/1000DBC 1500/1000DBC 2000/1000DBC 2000/150010.2010.2014.3014.3014.3016.60HeliuM leaK testinboardacross the seatoutboard Pressure test1 x 10-11 Pa.m 3/s (1 x 10-10 atm.cc (He) /s)1 x 10-10 Pa.m 3/s (1 x 10-9 atm.cc (He) /s)1 x 10-7 Pa.m 3/s (1 x 10-6 atm.cc (He) /s)Cleanliness anD PaCKaGinGassembled and tested in Class 10 Cleanroom. Purged and final Packaged in Class 1 Cleanroom. Double-bag packaging (2 mil nylon inner bag, 6 mil polyethylene outer bag) with ultra-High Purity n2 gas environment.stanDarD finisH electropolished to 10 ra Max (0.25 µm) on all wetted surfacesoPtionssurface finish – 5 ra, 15 ra, 20 ra, 30 ratesting: Particle, moisture, tHC and o2Handwheel color options availableair acutated operation available all sizesfitting type and location – inlet and outletoptional seat material available for higher temperature applicationsspecifications are subject to change without notice. D.500/.750/1.000 .500/.750/1.000 .500/.750/1.000DDEasy Grip HandlesOpen/Close Indicator316 Stainless Steel Stem303 Stainless Steel BonnetEasy Grip HandlesWeather Seal316L BonnetNickel Foil SealElectropolished 316L Seat HolderPCTFE Seat InsertElgiloy DiaphragmMain-inleTElectropolished 316L Seat HolderPCTFE Seat Insert 316 BellowsStandard Purge Ports* (Downstream, 2 Places)316L Stainless Steel Barstock Body316L Stainless Steel Tube Stubs*316L Stainless Steel Tube Stubs*DPC 1000/500DFC 1000/500BranCH-oUTleT BranCH-oUTleTBranCH-oUTleT BranCH-oUTleTDPC Construction Materials DFC Construction MaterialsDuplex seriesDPC Series Product Features DFC Series Product Featuresthis compact Duplex (diaphragm design) valve series is intended for bulk gas distribution service where containment, cleanliness and purity are of utmost importance. applications for this valve include:• Ultra-high purity gas system control valves• Ultra-high purity gas control for point-of-use or service for hookups• Superior containment and cleanliness for your most critical valve applications• Suitability for inert and most toxic gasesthis Duplex series is bellows designed for high performance applications which require high flow rates and superior leak, moisture and particle capabilities. applications for this valve include:• Highest Cv available• Ultra-high purity gas distribution system control valves• Superior containment and cleanliness for your most critical valve applications• Suitability for inert and most toxic gasesDFC Series Technical DataMaterial of ConstruCtionWetted areas 316, 316l stainless steel, nickel/PCtfenon-Wetted areas 316l stainless steel, 17-4 PH stainless turciteMaXiMuM oPeratinG Pressure DfC/DBC series Vacuum to 375 psig (25.8 bar)MaXiMuM oPeratinG teMPerature DfC/DBC series -22° f (-30° C) to 180° f (82° C)floW CoeffiCent (Cv) DfC/Dft/DfV 500/500DfC/Dft/DfV 750/500DfC/Dft/DfV 1000/500DfC/Dft/DfV 1500/500DfC/Dft/DfV 2000/5003.263.523.673.954.15HeliuM leaK testinboardacross the seatoutboard Pressure test1 x 10-11 Pa.m 3/s (1 x 10-10 atm.cc (He) /s)1 x 10-10 Pa.m 3/s (1 x 10-9 atm.cc (He) /s)1 x 10-7 Pa.m 3/s (1 x 10-6 atm.cc (He) /s)Cleanliness anD PaCKaGinGassembled and tested in Class 10 cleanroom, Purged and final packaged in Class 1 cleanroom. Double-bag packaging (2 mil nylon inner bag, 6 mil polyethylene outer bag) with ultra-High Purity n2 gas environment.stanDarD finisH electropolished to 10 ra Max (0.25 µm) on all wetted surfacesoPtionssurface finish – 5 ra, 20 ratesting: Particle, moisture, tHC, o2, seM, esCa and augerPneumatic actuators available-types: nC/no/Dafitting connections available for up to 1.00” size – inlet/outletHandle colorsJis tube stubs and tube lengthspecifications are subject to change without notice.DFC Series Technical Dimensionsl Diaphragm Design for ultra-High Purity and long Cycle lifel elgiloy tied-Diaphragm for Maximum flow and High life Cycle l springless, Packless Designl no internal Particle shedding Componentsl electropolished Wetted surfaces to 10 ra Max (optional surface finishes available)l industry leading Design in ultra-High Purity Gas Containment l assembled and tested in Class 10 Cleanrooml Valve Bodies and tube stubs are serialized for Material Certificationl Purge Connections and Purge Valves are integral in Valve Bodyl inboard and across the seat leak tested with Heliuml Cleaned for ultra-High Purity Gas servicel Purged and final Packaged in Class 1 Cleanroom. Double-Bag Packaging with ultra-High Purity n2 Gas environmentl High Performance, Compact Designl 316 Bellows Design for ultra-High Purity and long Cycle lifel electropolished Wetted surfaces to 10 ra Max (optional surface finishes available)l industry leading Design in ultra-High Purity Gas Containmentl Purge Connections are integral to Valve Bodyl assembled and tested in Class 10 Cleanrooml inboard and across the seat leak tested with Heliuml Valve Bodies and tube stubs are serialized for Material Certificationl Purged and final Packaged in Class 1 Cleanroom, Double-Bag Packaging with ultra-High Purity n2 Gas environmentsize a B C D eDfC/Dft/DfV 500/500 Ø 0.50(12.7mm)0.049(1.2mm)0.50(12.7mm)3.96(100.5mm)9.42(239.2mm)DfC/Dft/DfV 750/500 Ø 0.75(19.1mm)0.065(1.6mm)0.50(12.7mm)2.95(74.9mm)7.40(187.9mm)DfC/Dft/DfV 1000/500 Ø 1.00(25.4mm)0.065(1.6mm)0.65(16.5mm)2.95(74.9mm)7.40(187.9mm)DfC/Dft/DfV 1500/500 Ø 1.50(38.1mm)0.065(1.6mm)0.90(22.8mm)2.95(74.9mm)7.40(187.9mm)DfC/Dft/DfV 2000/500 Ø 2.00(50.8mm)0.065(1.6mm)1.50(38.1mm)2.95(74.9mm)7.40(187.9mm)*see corresponding Code Chart for available end connections. *see corresponding Code Chart for available end connections.Main-inleTDuplex seriesStandard Purge Ports* (Downstream, 2 Places)316L Stainless Steel Barstock Bodynote 1: all tolerances are ±0.06 in. (±1.52mm) unless otherwise stated. note 2: Dimensional drawings shown are for reference only. Please contact Carten® for customer drawings.note 3: this tube stub is not applicable for the Dft version.DFC Series Typical Valve Dimensions? ?6.04? ?3.02??7.88??3.942 PL.? ???4.75 OPEN4.25 CLOSED.5002 PL.??3.022 PL.???E????????D+_ .12BRANCH-OUTLET ????.5002 PL.0.250 FSM-MRPURGE 2 PL.MAIN??2.102 PL.1.242 PL.1.712 PL.??D2 PL. ?.7502 PL.? ?1.50+_ .12MAIN???? ??C2 PL.B0 A2 PL.? ?6.04?3.02??7.88??3.942 PL.? ?13.92??4.75 OPEN4.25 CLOSED.5002 PL.??3.022 PL.+_ .12BRANCH-OUTLET????.5002 PL.0????AB?????2.102 PL.1.242 PL.1.712 PL.??? ?1.50MAIN-INLET? .7502 PL.See Duplex Tee Note 3BRANCH-OUTLETBRANCH-OUTLETMAIN-INLET?.250 FSM-MRPURGE 2 PL.13.92 DFC 1000/500 (DUPlex CroSS) DFV 1000/500 (DUPlex VerTiCal)Ultra-High Purity Diaphragm Valves (DPC) Ultra-High Purity Bellows Valves (DFC) Ultra-High Purity Block Bellows Valves (DBC)Duplex seriesDPC Series Typical Valve DimensionsHHH/2H/2GGOPENDD BSeeDuplex TeeNote 32.982 PL.2.982 PL.FFJJBEKE/2EK ±0. 12E/2ØCØC ØA1.711.711.241.24 2.981.001.002.002.982 PL.L2.00DUPLEX TEE NOTE: This tube stub is not applicablefor the DPT version.Ø A±0. 12±0. 12MAIN-INLETBRANCH-OUTLETBRANCH-OUTLETMAIN-INLETOPENBRANCH-OUTLETBRANCH-OUTLETDPC 750/500 (DUPlex CroSS)DPV 750/500 (DUPlex VerTiCal)DPC Series Technical DataMaterial of ConstruCtionWetted areas elgiloy, 316l stainless steel, PCtfenon-Wetted areas 316l stainless steel, 303 stainless steelMaXiMuM oPeratinG Pressure DPC series Vacuum to 375 psig (25.8 bar)oPeratinG teMPerature ranGe DPC series -22º f (-30ºC) to 180º f (82ºC)floW CoeffiCent (Cv)DPC series 2.96DPV/DPt series 3.10HeliuM leaK testinboardacross the seatoutboard Pressure test1 x 10-11 Pa.m 3/s (1 x 10-10 atm.cc (He) /s)1 x 10-10 Pa.m 3/s (1 x 10-9 atm.cc (He) /s)1 x 10-7 Pa.m 3/s (1 x 10-6 atm.cc (He) /s)Cleanlinessassembled and tested in Class 10 cleanroom. Purged and final packaged in Class 1 cleanroom. Double-bag packaging (2 mil nylon inner bag, 6 mil polyethylene outer bag) with ultra-High Purity n2 gas environment.stanDarD finisH electropolished to 10 ra Max (0.25 µm) on all wetted surfacesoPtionssurface finish - 10 ra, 20 ra, 25 ra eP, 20 ra BaParticle, moisture, tHC and o2 testingseM and esCa testing, auger analysisPneumatic actuators available-types: nC/no/Dafitting connections available for up to 1.00” size – inlet/outletMaterial: Vespel® seatHandle color (std. white)Jis tube stubs and tube lengthspecifications are subject to change without notice. Vespel® is a registered trademark of the DuPont Company. DPC Series Technical Dimensionssize a B C D e f G H J K lDPC/DPV 750/500 Ø 0.75(19.1mm)0.065(1.6mm)Ø 0.50(12.7mm)0.049(1.2mm)4.16(105.6mm)0.75(19.1mm)3.81(96.7mm)1.50(38.1mm)1.92(48.8mm)10.10(256.5mm)7.94(201.6mm)DPC/DPV 750/750 Ø 0.75(19.1mm)0.065(1.6mm)Ø 0.75(19.0mm)0.065(1.6mm)4.16(105.6mm)0.75(19.1mm)3.81(96.7mm)1.50(38.1mm)1.92(48.8mm)10.10(256.5mm)7.94(201.6mm)DPC/DPV 1000/500 Ø 1.00(25.4mm)0.065(1.6mm)Ø 0.50(12.7mm)0.049(1.2mm)4.16(105.6mm)0.75(19.1mm)3.81(96.7mm)1.50(38.1mm)1.92(48.8mm)10.10(256.5mm)7.94(201.6mm)DPC/DPV 1000/750 Ø 1.00(25.4mm)0.065(1.6mm)Ø 0.75(19.0mm)0.065(1.6mm)4.16(105.6mm)0.75(19.1mm)3.81(96.7mm)1.50(38.1mm)1.92(48.8mm)10.10(256.5mm)7.94(201.6mm)DPC/DPV 1500/500 Ø 1.50(38.1mm)0.065(1.6mm)Ø 0.50(12.7mm)0.049(1.2mm)4.86(118.4mm)1.13(28.7mm)4.42(112.2mm)2.00(50.8mm)2.55(64.7mm)10.58(268.7mm)7.94(201.6mm)DPC/DPV 1500/750 Ø 1.50(38.1mm)0.065(1.6mm)Ø 0.75(19.0mm)0.065(1.6mm)4.86(118.4mm)1.13(28.7mm)4.42(112.2mm)2.00(50.8mm)2.55(64.7mm)10.58(268.7mm)7.94(201.6mm)DPC/DPV 2000/500 Ø 2.00(50.8mm)0.065(1.6mm)Ø 0.50(12.7mm)0.049(1.2mm)4.86(118.4mm)1.13(28.7mm)4.42(112.2mm)2.00(50.8mm)2.55(64.7mm)10.58(268.7mm)9.92(251.9mm)DPC/DPV 2000/750 Ø 2.00(50.8mm)0.065(1.6mm)Ø 0.75(19.0mm)0.065(1.6mm)4.86(118.4mm)1.13(28.7mm)4.42(112.2mm)2.00(50.8mm)2.55(64.7mm)10.58(268.7mm)9.92(251.9mm)sizeDimension “D”fsM-M fsM-f sWG500 1.54(39.1mm)1.54(39.1mm)2.10(53.3mm)750 2.04(51.8mm)2.04(51.8mm)2.03(51.6mm)1000 2.36(59.9mm)2.36(59.9mm)2.49(63.2mm)oPTional ValVe enD ConneCTionSAvAilAble on DPC boDy sizesreV 2010Carten Controls, A division of Fujikin 604 W. Johnson avenue, Cheshire, Ct 06410 phone: 203-699-2100 | fax: 203-699-2179www.cartenus.comnote 1: all tolerances are ±0.06 in. (±1.52mm) unless otherwise stated. note 2: Dimensional drawings shown are for reference only. Please contact Carten® for customer drawings.note 3: this tube stub is not applicable for the DPt version.DBC Series Typical Valve Dimensions DBC 2000/1000note 1: all tolerances are ±0.06 in. (±1.52mm) unless otherwise stated. note 2: Dimensional drawings shown are for reference only. Please contact Carten® for customer drawings.DBC Series Technical DataMaterial of ConstruCtionWetted areas 321, 316l stainless steel, PCtfenon-Wetted areas 316l stainless steel, nickel foil, 303 stainless steelMaXiMuM oPeratinG Pressure uBC series Vacuum to 375 psig (25.8 bar)MaXiMuM oPeratinG teMPerature uBC series -22º f (-30ºC) to 180º f (82ºC)floW CoeffiCient (Cv)DBC 1000/750DBC 1500/750DBC 1000/1000DBC 1500/1000DBC 2000/1000DBC 2000/150010.2010.2014.3014.3014.3016.60HeliuM leaK testinboardacross the seatoutboard Pressure test1 x 10-11 Pa.m 3/s (1 x 10-10 atm.cc (He) /s)1 x 10-10 Pa.m 3/s (1 x 10-9 atm.cc (He) /s)1 x 10-7 Pa.m 3/s (1 x 10-6 atm.cc (He) /s)Cleanliness anD PaCKaGinGassembled and tested in Class 10 Cleanroom. Purged and final Packaged in Class 1 Cleanroom. Double-bag packaging (2 mil nylon inner bag, 6 mil polyethylene outer bag) with ultra-High Purity n2 gas environment.stanDarD finisH electropolished to 10 ra Max (0.25 µm) on all wetted surfacesoPtionssurface finish – 5 ra, 15 ra, 20 ra, 30 ratesting: Particle, moisture, tHC and o2Handwheel color options availableair acutated operation available all sizesfitting type and location – inlet and outletoptional seat material available for higher temperature applicationsspecifications are subject to change without notice. D.500/.750/1.000 .500/.750/1.000 .500/.750/1.000DDEasy Grip HandlesOpen/Close Indicator316 Stainless Steel Stem303 Stainless Steel BonnetEasy Grip HandlesWeather Seal316L BonnetNickel Foil SealElectropolished 316L Seat HolderPCTFE Seat InsertElgiloy DiaphragmMain-inleTElectropolished 316L Seat HolderPCTFE Seat Insert 316 BellowsStandard Purge Ports* (Downstream, 2 Places)316L Stainless Steel Barstock Body316L Stainless Steel Tube Stubs*316L Stainless Steel Tube Stubs*DPC 1000/500DFC 1000/500BranCH-oUTleT BranCH-oUTleTBranCH-oUTleT BranCH-oUTleTDPC Construction Materials DFC Construction MaterialsDuplex seriesDPC Series Product Features DFC Series Product Featuresthis compact Duplex (diaphragm design) valve series is intended for bulk gas distribution service where containment, cleanliness and purity are of utmost importance. applications for this valve include:• Ultra-high purity gas system control valves• Ultra-high purity gas control for point-of-use or service for hookups• Superior containment and cleanliness for your most critical valve applications• Suitability for inert and most toxic gasesthis Duplex series is bellows designed for high performance applications which require high flow rates and superior leak, moisture and particle capabilities. applications for this valve include:• Highest Cv available• Ultra-high purity gas distribution system control valves• Superior containment and cleanliness for your most critical valve applications• Suitability for inert and most toxic gasesDFC Series Technical DataMaterial of ConstruCtionWetted areas 316, 316l stainless steel, nickel/PCtfenon-Wetted areas 316l stainless steel, 17-4 PH stainless turciteMaXiMuM oPeratinG Pressure DfC/DBC series Vacuum to 375 psig (25.8 bar)MaXiMuM oPeratinG teMPerature DfC/DBC series -22° f (-30° C) to 180° f (82° C)floW CoeffiCent (Cv) DfC/Dft/DfV 500/500DfC/Dft/DfV 750/500DfC/Dft/DfV 1000/500DfC/Dft/DfV 1500/500DfC/Dft/DfV 2000/5003.263.523.673.954.15HeliuM leaK testinboardacross the seatoutboard Pressure test1 x 10-11 Pa.m 3/s (1 x 10-10 atm.cc (He) /s)1 x 10-10 Pa.m 3/s (1 x 10-9 atm.cc (He) /s)1 x 10-7 Pa.m 3/s (1 x 10-6 atm.cc (He) /s)Cleanliness anD PaCKaGinGassembled and tested in Class 10 cleanroom, Purged and final packaged in Class 1 cleanroom. Double-bag packaging (2 mil nylon inner bag, 6 mil polyethylene outer bag) with ultra-High Purity n2 gas environment.stanDarD finisH electropolished to 10 ra Max (0.25 µm) on all wetted surfacesoPtionssurface finish – 5 ra, 20 ratesting: Particle, moisture, tHC, o2, seM, esCa and augerPneumatic actuators available-types: nC/no/Dafitting connections available for up to 1.00” size – inlet/outletHandle colorsJis tube stubs and tube lengthspecifications are subject to change without notice.DFC Series Technical Dimensionsl Diaphragm Design for ultra-High Purity and long Cycle lifel elgiloy tied-Diaphragm for Maximum flow and High life Cycle l springless, Packless Designl no internal Particle shedding Componentsl electropolished Wetted surfaces to 10 ra Max (optional surface finishes available)l industry leading Design in ultra-High Purity Gas Containment l assembled and tested in Class 10 Cleanrooml Valve Bodies and tube stubs are serialized for Material Certificationl Purge Connections and Purge Valves are integral in Valve Bodyl inboard and across the seat leak tested with Heliuml Cleaned for ultra-High Purity Gas servicel Purged and final Packaged in Class 1 Cleanroom. Double-Bag Packaging with ultra-High Purity n2 Gas environmentl High Performance, Compact Designl 316 Bellows Design for ultra-High Purity and long Cycle lifel electropolished Wetted surfaces to 10 ra Max (optional surface finishes available)l industry leading Design in ultra-High Purity Gas Containmentl Purge Connections are integral to Valve Bodyl assembled and tested in Class 10 Cleanrooml inboard and across the seat leak tested with Heliuml Valve Bodies and tube stubs are serialized for Material Certificationl Purged and final Packaged in Class 1 Cleanroom, Double-Bag Packaging with ultra-High Purity n2 Gas environmentsize a B C D eDfC/Dft/DfV 500/500 Ø 0.50(12.7mm)0.049(1.2mm)0.50(12.7mm)3.96(100.5mm)9.42(239.2mm)DfC/Dft/DfV 750/500 Ø 0.75(19.1mm)0.065(1.6mm)0.50(12.7mm)2.95(74.9mm)7.40(187.9mm)DfC/Dft/DfV 1000/500 Ø 1.00(25.4mm)0.065(1.6mm)0.65(16.5mm)2.95(74.9mm)7.40(187.9mm)DfC/Dft/DfV 1500/500 Ø 1.50(38.1mm)0.065(1.6mm)0.90(22.8mm)2.95(74.9mm)7.40(187.9mm)DfC/Dft/DfV 2000/500 Ø 2.00(50.8mm)0.065(1.6mm)1.50(38.1mm)2.95(74.9mm)7.40(187.9mm)*see corresponding Code Chart for available end connections. *see corresponding Code Chart for available end connections.Main-inleTDuplex seriesStandard Purge Ports* (Downstream, 2 Places)316L Stainless Steel Barstock Bodynote 1: all tolerances are ±0.06 in. (±1.52mm) unless otherwise stated. note 2: Dimensional drawings shown are for reference only. Please contact Carten® for customer drawings.note 3: this tube stub is not applicable for the Dft version.DFC Series Typical Valve Dimensions? ?6.04? ?3.02??7.88??3.942 PL.? ???4.75 OPEN4.25 CLOSED.5002 PL.??3.022 PL.???E????????D+_ .12BRANCH-OUTLET ????.5002 PL.0.250 FSM-MRPURGE 2 PL.MAIN??2.102 PL.1.242 PL.1.712 PL.??D2 PL. ?.7502 PL.? ?1.50+_ .12MAIN???? ??C2 PL.B0 A2 PL.? ?6.04?3.02??7.88??3.942 PL.? ?13.92??4.75 OPEN4.25 CLOSED.5002 PL.??3.022 PL.+_ .12BRANCH-OUTLET????.5002 PL.0????AB?????2.102 PL.1.242 PL.1.712 PL.??? ?1.50MAIN-INLET? .7502 PL.See Duplex Tee Note 3BRANCH-OUTLETBRANCH-OUTLETMAIN-INLET?.250 FSM-MRPURGE 2 PL.13.92 DFC 1000/500 (DUPlex CroSS) DFV 1000/500 (DUPlex VerTiCal)Easy Grip HandlesOpen/Close Indicator316 Stainless Steel Stem303 Stainless Steel BonnetEasy Grip HandlesWeather Seal316L BonnetNickel Foil SealElectropolished 316L Seat HolderPCTFE Seat InsertElgiloy DiaphragmMain-inletElectropolished 316L Seat HolderPCTFE Seat Insert 316 BellowsStandard Purge Ports* (Downstream, 2 Places)316L Stainless Steel Barstock Body316L Stainless Steel Tube Stubs*316L Stainless Steel Tube Stubs*DPC 1000/500DFC 1000/500branCh-Outlet branCh-OutletbranCh-Outlet branCh-OutletDPC Construction Materials DFC Construction Materialsduplex seriesDPC Series Product Features DFC Series Product FeaturesThis compact Duplex (diaphragm design) valve series is intended for bulk gas distribution service where containment, cleanliness and purity are of utmost importance. Applications for this valve include:• Ultra-high purity gas system control valves• Ultra-high purity gas control for point-of-use or service for hookups• Superior containment and cleanliness for your most critical valve applications• Suitability for inert and most toxic gasesThis Duplex series is bellows designed for high performance applications which require high flow rates and superior leak, moisture and particle capabilities. Applications for this valve include:• Highest Cv available• Ultra-high purity gas distribution system control valves• Superior containment and cleanliness for your most critical valve applications• Suitability for inert and most toxic gasesDFC Series technical DataMATeriAl OF COnsTruCTiOnWetted Areas 316, 316l stainless steel, nickel/PCTFenon-Wetted Areas 316l stainless steel, 17-4 PH stainless TurciteMAxiMuM OPerATinG Pressure DFC/DBC series Vacuum to 375 psig (25.8 bar)MAxiMuM OPerATinG TeMPerATure DFC/DBC series -22° F (-30° C) to 180° F (82° C)FlOW COeFFiCenT (Cv) DFC/DFT/DFV 500/500DFC/DFT/DFV 750/500DFC/DFT/DFV 1000/500DFC/DFT/DFV 1500/500DFC/DFT/DFV 2000/5003.263.523.673.954.15HeliuM leAK TesTinboardAcross the seatOutboard Pressure Test1 x 10-11 Pa.m 3/s (1 x 10-10 atm.cc (He) /s)1 x 10-10 Pa.m 3/s (1 x 10-9 atm.cc (He) /s)1 x 10-7 Pa.m 3/s (1 x 10-6 atm.cc (He) /s)CleAnliness AnD PACKAGinGAssembled and tested in Class 10 cleanroom, Purged and final packaged in ClAss 1 cleanroom. Double-bag packaging (2 mil nylon inner bag, 6 mil polyethylene outer bag) with ultra-High Purity n2 gas environment.sTAnDArD FinisH electropolished to 10 ra Max (0.25 µm) on all wetted surfacesOPTiOnssurface finish – 5 ra, 20 raTesting: Particle, moisture, THC, O2, seM, esCA and AugerPneumatic actuators available-types: nC/nO/DAFitting connections available for up to 1.00” size – inlet/outletHandle colorsJis tube stubs and tube lengthspecifications are subject to change without notice.DFC Series technical Dimensionsl Diaphragm Design for ultra-High Purity and long Cycle lifel elgiloy Tied-Diaphragm for Maximum Flow and High life Cycle l springless, Packless Designl no internal Particle shedding Componentsl electropolished Wetted surfaces to 10 ra Max (Optional surface finishes available)l industry leading Design in ultra-High Purity Gas Containment l Assembled and Tested in Class 10 Cleanrooml Valve Bodies and Tube stubs are serialized for Material Certificationl Purge Connections and Purge Valves are integral in Valve Bodyl inboard and Across the seat leak Tested with Heliuml Cleaned for ultra-High Purity Gas servicel Purged and Final Packaged in Class 1 Cleanroom. Double-Bag Packaging with ultra-High Purity n2 Gas environmentl High Performance, Compact Designl 316 Bellows Design for ultra-High Purity and long Cycle lifel electropolished Wetted surfaces to 10 ra Max (Optional surface finishes available)l industry leading Design in ultra-High Purity Gas Containmentl Purge Connections are integral to Valve Bodyl Assembled and Tested in Class 10 Cleanrooml inboard and Across the seat leak Tested with Heliuml Valve Bodies and Tube stubs are serialized for Material Certificationl Purged and Final Packaged in Class 1 Cleanroom, Double-Bag Packaging with ultra-High Purity n2 Gas environmentsize A B C D eDFC/DFT/DFV 500/500 Ø 0.50(12.7mm)0.049(1.2mm)0.50(12.7mm)3.96(100.5mm)9.42(239.2mm)DFC/DFT/DFV 750/500 Ø 0.75(19.1mm)0.065(1.6mm)0.50(12.7mm)2.95(74.9mm)7.40(187.9mm)DFC/DFT/DFV 1000/500 Ø 1.00(25.4mm)0.065(1.6mm)0.65(16.5mm)2.95(74.9mm)7.40(187.9mm)DFC/DFT/DFV 1500/500 Ø 1.50(38.1mm)0.065(1.6mm)0.90(22.8mm)2.95(74.9mm)7.40(187.9mm)DFC/DFT/DFV 2000/500 Ø 2.00(50.8mm)0.065(1.6mm)1.50(38.1mm)2.95(74.9mm)7.40(187.9mm)*see corresponding Code Chart for available end connections. *see corresponding Code Chart for available end connections.Main-inletduplex seriesStandard Purge Ports* (Downstream, 2 Places)316L Stainless Steel Barstock BodynOTe 1: All tolerances are ±0.06 in. (±1.52mm) unless otherwise stated. nOTe 2: Dimensional drawings shown are for reference only. Please contact CArTen® for customer drawings.nOTe 3: This tube stub is not applicable for the DFT version.DFC Series typical Valve Dimensions? ?6.04? ?3.02??7.88??3.942 PL.? ???4.75 OPEN4.25 CLOSED.5002 PL.??3.022 PL.???E????????D+_ .12BRANCH-OUTLET ????.5002 PL.0.250 FSM-MRPURGE 2 PL.MAIN??2.102 PL.1.242 PL.1.712 PL.??D2 PL. ?.7502 PL.? ?1.50+_ .12MAIN???? ??C2 PL.B0 A2 PL.? ?6.04?3.02??7.88??3.942 PL.? ?13.92??4.75 OPEN4.25 CLOSED.5002 PL.??3.022 PL.+_ .12BRANCH-OUTLET????.5002 PL.0????AB?????2.102 PL.1.242 PL.1.712 PL.??? ?1.50MAIN-INLET? .7502 PL.See Duplex Tee Note 3BRANCH-OUTLETBRANCH-OUTLETMAIN-INLET?.250 FSM-MRPURGE 2 PL.13.92 DFC 1000/500 (DuPlex CrOSS) DFV 1000/500 (DuPlex VertiCal)Ultra-High Purity Diaphragm Valves (DPC) Ultra-High Purity Bellows Valves (DFC) Ultra-High Purity Block Bellows Valves (DBC)Duplex seriesDPC Series Typical Valve DimensionsHHH/2H/2GGOPENDD BSeeDuplex TeeNote 32.982 PL.2.982 PL.FFJJBEKE/2EK ±0. 12E/2ØCØC ØA1.711.711.241.24 2.981.001.002.002.982 PL.L2.00DUPLEX TEE NOTE: This tube stub is not applicablefor the DPT version.Ø A±0. 12±0. 12MAIN-INLETBRANCH-OUTLETBRANCH-OUTLETMAIN-INLETOPENBRANCH-OUTLETBRANCH-OUTLETDPC 750/500 (DUPlex CroSS)DPV 750/500 (DUPlex VerTiCal)DPC Series Technical DataMaterial of ConstruCtionWetted areas elgiloy, 316l stainless steel, PCtfenon-Wetted areas 316l stainless steel, 303 stainless steelMaXiMuM oPeratinG Pressure DPC series Vacuum to 375 psig (25.8 bar)oPeratinG teMPerature ranGe DPC series -22º f (-30ºC) to 180º f (82ºC)floW CoeffiCent (Cv)DPC series 2.96DPV/DPt series 3.10HeliuM leaK testinboardacross the seatoutboard Pressure test1 x 10-11 Pa.m 3/s (1 x 10-10 atm.cc (He) /s)1 x 10-10 Pa.m 3/s (1 x 10-9 atm.cc (He) /s)1 x 10-7 Pa.m 3/s (1 x 10-6 atm.cc (He) /s)Cleanlinessassembled and tested in Class 10 cleanroom. Purged and final packaged in Class 1 cleanroom. Double-bag packaging (2 mil nylon inner bag, 6 mil polyethylene outer bag) with ultra-High Purity n2 gas environment.stanDarD finisH electropolished to 10 ra Max (0.25 µm) on all wetted surfacesoPtionssurface finish - 10 ra, 20 ra, 25 ra eP, 20 ra BaParticle, moisture, tHC and o2 testingseM and esCa testing, auger analysisPneumatic actuators available-types: nC/no/Dafitting connections available for up to 1.00” size – inlet/outletMaterial: Vespel® seatHandle color (std. white)Jis tube stubs and tube lengthspecifications are subject to change without notice. Vespel® is a registered trademark of the DuPont Company. DPC Series Technical Dimensionssize a B C D e f G H J K lDPC/DPV 750/500 Ø 0.75(19.1mm)0.065(1.6mm)Ø 0.50(12.7mm)0.049(1.2mm)4.16(105.6mm)0.75(19.1mm)3.81(96.7mm)1.50(38.1mm)1.92(48.8mm)10.10(256.5mm)7.94(201.6mm)DPC/DPV 750/750 Ø 0.75(19.1mm)0.065(1.6mm)Ø 0.75(19.0mm)0.065(1.6mm)4.16(105.6mm)0.75(19.1mm)3.81(96.7mm)1.50(38.1mm)1.92(48.8mm)10.10(256.5mm)7.94(201.6mm)DPC/DPV 1000/500 Ø 1.00(25.4mm)0.065(1.6mm)Ø 0.50(12.7mm)0.049(1.2mm)4.16(105.6mm)0.75(19.1mm)3.81(96.7mm)1.50(38.1mm)1.92(48.8mm)10.10(256.5mm)7.94(201.6mm)DPC/DPV 1000/750 Ø 1.00(25.4mm)0.065(1.6mm)Ø 0.75(19.0mm)0.065(1.6mm)4.16(105.6mm)0.75(19.1mm)3.81(96.7mm)1.50(38.1mm)1.92(48.8mm)10.10(256.5mm)7.94(201.6mm)DPC/DPV 1500/500 Ø 1.50(38.1mm)0.065(1.6mm)Ø 0.50(12.7mm)0.049(1.2mm)4.86(118.4mm)1.13(28.7mm)4.42(112.2mm)2.00(50.8mm)2.55(64.7mm)10.58(268.7mm)7.94(201.6mm)DPC/DPV 1500/750 Ø 1.50(38.1mm)0.065(1.6mm)Ø 0.75(19.0mm)0.065(1.6mm)4.86(118.4mm)1.13(28.7mm)4.42(112.2mm)2.00(50.8mm)2.55(64.7mm)10.58(268.7mm)7.94(201.6mm)DPC/DPV 2000/500 Ø 2.00(50.8mm)0.065(1.6mm)Ø 0.50(12.7mm)0.049(1.2mm)4.86(118.4mm)1.13(28.7mm)4.42(112.2mm)2.00(50.8mm)2.55(64.7mm)10.58(268.7mm)9.92(251.9mm)DPC/DPV 2000/750 Ø 2.00(50.8mm)0.065(1.6mm)Ø 0.75(19.0mm)0.065(1.6mm)4.86(118.4mm)1.13(28.7mm)4.42(112.2mm)2.00(50.8mm)2.55(64.7mm)10.58(268.7mm)9.92(251.9mm)sizeDimension “D”fsM-M fsM-f sWG500 1.54(39.1mm)1.54(39.1mm)2.10(53.3mm)750 2.04(51.8mm)2.04(51.8mm)2.03(51.6mm)1000 2.36(59.9mm)2.36(59.9mm)2.49(63.2mm)oPTional ValVe enD ConneCTionSAvAilAble on DPC boDy sizesreV 2010Carten Controls, A division of Fujikin 604 W. Johnson avenue, Cheshire, Ct 06410 phone: 203-699-2100 | fax: 203-699-2179www.cartenus.comnote 1: all tolerances are ±0.06 in. (±1.52mm) unless otherwise stated. note 2: Dimensional drawings shown are for reference only. Please contact Carten® for customer drawings.note 3: this tube stub is not applicable for the DPt version.DBC Series Typical Valve Dimensions DBC 2000/1000note 1: all tolerances are ±0.06 in. (±1.52mm) unless otherwise stated. note 2: Dimensional drawings shown are for reference only. Please contact Carten® for customer drawings.DBC Series Technical DataMaterial of ConstruCtionWetted areas 321, 316l stainless steel, PCtfenon-Wetted areas 316l stainless steel, nickel foil, 303 stainless steelMaXiMuM oPeratinG Pressure uBC series Vacuum to 375 psig (25.8 bar)MaXiMuM oPeratinG teMPerature uBC series -22º f (-30ºC) to 180º f (82ºC)floW CoeffiCient (Cv)DBC 1000/750DBC 1500/750DBC 1000/1000DBC 1500/1000DBC 2000/1000DBC 2000/150010.2010.2014.3014.3014.3016.60HeliuM leaK testinboardacross the seatoutboard Pressure test1 x 10-11 Pa.m 3/s (1 x 10-10 atm.cc (He) /s)1 x 10-10 Pa.m 3/s (1 x 10-9 atm.cc (He) /s)1 x 10-7 Pa.m 3/s (1 x 10-6 atm.cc (He) /s)Cleanliness anD PaCKaGinGassembled and tested in Class 10 Cleanroom. Purged and final Packaged in Class 1 Cleanroom. Double-bag packaging (2 mil nylon inner bag, 6 mil polyethylene outer bag) with ultra-High Purity n2 gas environment.stanDarD finisH electropolished to 10 ra Max (0.25 µm) on all wetted surfacesoPtionssurface finish – 5 ra, 15 ra, 20 ra, 30 ratesting: Particle, moisture, tHC and o2Handwheel color options availableair acutated operation available all sizesfitting type and location – inlet and outletoptional seat material available for higher temperature applicationsspecifications are subject to change without notice. D.500/.750/1.000 .500/.750/1.000 .500/.750/1.000DD