CDR Pompe - HTN - Plastic Magnetic Drive Turbine Peripheral Pumps Brochure

Compact, Plastic Magnetic drive Regenerative Turbine pumpsMaterials: PP (Polypropylene), PVDF (Polyvinylidene fluoride)Close-coupled executionPlastic Magnetic Drive Turbine Peripheral PumpsHTN RPompe S.P.A.Comply to : 2006/42/CEAvailable upon request :ATEXDirective 94/9/ECFlanges :UNI 1092 PN16RF type B ANSI 150RFHTN PVDFThe regenerative pump produces large head at comparatively small flows : a performance range which is not usually covered by standard centrifugal pumpsDesignReliabilitySuitable for handling aggressive and hazardous liquids (low viscosity, clean or slightly contaminated) in the chemical, petrochemical and pharmaceutical industriesVersatilityThe HTN offers a good range of materials for the wetted parts :• PP (Polypropylene)• PVDF (Polyvinylidene fluoride)RPompe S.P.A.HTN range are Plastic Sealless Magnetic Drive horizontal turbine single-stage pumpsInner and Outer magnets are equipped with NdFeB (neodymium iron boron) or SmCo (samarium cobalt) permanent magnetsPatented cage magnet attachment guarantee stability during the operation of the pumpThe HTN are available in close coupled execution, suitable to be coupled with standard electrical motorsCan operate without axial or radial thrusts thanks to the impeller design, eliminating wear on axial thrust bearing The forced internal recirculation path design allows the pump to work properly along the whole performances curveSealless designTotal containment, essential for hazardous, aggressive or valuable product.Zero Eddy Current Loses thanks to non metallic executionMag drive conceptThe synchronous drive configuration is based on an outer magnet ring assembly built to magnetically couple with an inner magnet ring assembly. These two magnet rings are locked together by the flux of attracting magnet poles flowing through the containment isolation shellwww.cdrpompe.itTECHNICAL SPECIFICATIONSPart listDIN Components Materials102.1/.2 Casing PP/PVDF157 Isolation Shell ETFE+PC211 Pump Shaft SiC/Al2O3230 Impeller PVDF344 Lantern GS400412.1 Casing O-Ring EPDM/FPM/FKM510 Thrust Bearing SiC/Al2O3529 Bearing Sleeve SiC/PTFE-Al2O3/Graphite855 Inner Magnet ETFE856 Outer Magnet GS400-Ryton7.5QH2900rpm01020304050607080m0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7m3\\\\hHTN 100HTN 90HTN 80QH1450rpm04681012141618m0.5 1 1.5 2 2.5 3 3.5m3\\\\h2HTN 100HTN 90HTN 8050 HzTechnical Specifications60 HzQH1750rpm048121620242832m0.5 1 1.5 2 2.5 3 3.5m3\\\\h2HTN 100HTN 90HTN 804 4.57.5QH3500rpm01020304050607080m0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7m3\\\\hHTN 80Performances 2900 rpm Q max = 6 m3/h -> H max = 75 mclElectric Motors 0.75 kW (motor size 80) -> 5.5 kW (motor size 132)Temperature range • PP : 0°C -> +60°C• PVDF : - 10°C -> +80°CAllowable Pressure Range• PP : from 9 bar (20°C) to 6 bar (60°C)• PVDF : from 9 bar (20°C) to 6 bar (80°C)Threaded ConnectionsHTN series G1” X G1”* as option : Flanges DN25 ISO 1092 PN10RF or ANSI 150 RFViscosity 1cSt min - 100 cSt maxAllowable Solids No solids are allowedNot binding data refers to water at room temperature. For specific performance curve contact CDR Pompe SpA.For further info, please visit www.cdrpompe.comC.D.R. Pompe S.p.A.Via P. Togliatti, 26/A - 20030 Senago (MI) - ItalyTel. +39029901941 Fax +39029980606www.cdrpompe.com info@cdrpompe.itRPompe S.P.A.Technical CharacteristicsThe technical data and characteristics stated in this General Catalogue are not binding. CDR Pompe S.p.a. reserves the right to make modifications without notice. Therefore data, dimensions, performances and any other stated issues are indicative only and not binding. Anyway for any technical details you must require an up-to-date product technical card.TB - HTN 2012.01