Censar MP Brochure (PDF 133 KB)

“Technology for Water Quality Monitoring” Censar? Probe Head & Chip BENEFITS: ? Direct and reagent-free measurement of Chlorine ? Glass free pH sensor ? Capability for measuring Monochloramine for plants using Chloramination ? Membrane-free measurement of Dissolved Oxygen ? Single point calibration ? Sensor chip field replaceable with typical six months service life ? Probe installs in standard 1.5” or 2” corporation stop FEATURES: ? Data available in RS232 Format or via 4-20 mA using optional MIM ? IP68 enclosure ? Optional internal data logging card ? Optional flowcell ? Cense –Tool, data collection and analysis package available Censar???? simultaneously measures: ? Chlorine – no reagents required ? Monochloramine or Dissolved Oxygen ? pH ? Temperature ? Conductivity ? ORP/REDOX Censar???? 6-in-1 Water Quality Sensor Censar???? is a 6-in-1 multiparameter in-line sensor that can measure Chlorine (free chlorine), Monochloramine or Dissolved Oxygen, pH, Conductivity, Oxidation-Reduction Potential, and Temperature. This electrochemical technology sits on a robust ceramic chip. Censar???? is the only multi-parameter sensor designed for direct insertion into pressurised water mains from 50 to 1800 mm (2 to 72 inches) in diameter. This capability makes Censar???? ideally suited to fulfill the requirements of water utilities to monitor the water quality throughout their distribution system. The unit is easy to install, simple to calibrate and is designed for durability and minimum operator maintenance. Censar Technologies, LLC 2825 Mount Pleasant St Suite 34 Burlington, IA 52601 USA Tel 866-423-6727 Outside USA (001)-319-758-6192 Fax 866-623-6727 w w w . c e n s a r . c o m Censar? Insertion into Pipe “Technology for Water Quality Monitoring” Monitoring Applications: Direct Pipe Insertion Our goal is to provide the most cost-effective water quality monitoring technology worldwide Chlorine Range 0 – 5 mg/L Sensitivity <0.01 mg/L Repeatability ±0.05 mg/L Accuracy ±0.04 mg/L Mono- chloramine Range 0 – 20 mg/L Sensitivity <0.05 mg/L Repeatability ±0.1 mg/L Accuracy ±0.1 mg/L (Customer specifies either monochloramine or dissolved oxygen) Dissolved Range 0 – 20 mg/L or 0 – 200% saturation Oxygen Sensitivity <0.1 mg/L Repeatability ±0.5 mg/L Accuracy ±0.1 mg/L or 5% of reading, whichever is greater Temperature Range 0 – +50° C Sensitivity <0.1% Repeatability ±0.1% Accuracy ±0.25° C or ±0.1% of reading, whichever is greater Conductivity Range 0.1 – 10.0 mS/cm Sensitivity <10µS/cm Repeatability ±10µS/cm or ±1% of reading, whichever is greater pH Range 2 – 12 Sensitivity <0.1 pH Repeatability ±0.1 pH Accuracy ±0.3 pH Redox/ORP Range -1.4 to 1.4 V Sensitivity <1% of range Repeatability ±1% of range Accuracy ±1% of range Electronics Temperature -10oC to +60oC Enclosure Housing IP68 Probe Head Diameter 36 mm. Quick release bayonet fitting of sensor chip Pressure tested to 25bar, 16 bar continuous rating Censar chip and Ag/AgCl reference electrode replaced every 6 months Fittings Fits 1.5” or 2” BSPP (using adaptor) Electronics Standard RS232 or available with 4-20 mA output option via PLC Power Supply: 12 Volts DC isolated (optional battery available) or via 110-240 Volt (optional AC supply) Performance in the field subject to installation conditions and regular calibration. Censar???? Specifications* Censar Technologies, LLC 2825 Mount Pleasant St Suite 34 Burlington, IA 52601 USA Tel 866-423-6727 Outside USA (001)-319-758-6192 Fax 866-623-6727 w w w . c e n s a r . c o m Direct Pipe/Process Variant installed in a Pipe Fixed Shaft Variant installed via a Standard Gate Valve