Chlorine Institute Emergency Kit - C Brochure

EMERGENCY KIT "C”CHLORINE INSTITUTEFOR CHLORINE TANK CARS AND TANK TRUCKSEMERGENCY KIT "A" FEATURES:Device #6Device #24:: containment device designed to contain leaks in and around the angle valves. Device #6 includestwo gaskets molded of Viton to conform to the bottom of hood 6A.containment device designed to contain leaks in and around the pressure relief device. Device#24 includes a lightweight, one-piece yoke design #11A for use over the safety relief valve. Device #24 alsoincludes two gaskets molded of Viton to conform to the bottom of hood 24A.Kit C also includes a variety of hand tools, inspection seals and additional leak containment devices. All itemsare labeled with a part number, color coded green and stored inside a durable polyethylene tool box.??(Viton is a registered trademark of DuPont Dow Elastomers L. L. C.)The Chlorine Institute Emergency Kit "C" is manufactured to the design specifications of the ChlorineInstitute. The Emergency Kit "C" contains devices to stop leaks at the safety valve or angle valves of standardDOT 105J500W chlorine tank cars, DOT MC331 cargo tanks and DOT 51 portable tanks in chlorine service.Two instruction booklets explaining the application of each device are included. An instructional video for Kit Cis also available.Manufactured to Chlorine Institute Specifications by Indian Springs Mfg. Co., Inc.www.indiansprings.comPhone 315.635.6101 Fax 315.635.7473Emergency Device No. 611AEmergency Device No. 2411APartNumber6A16BMV11A24A124BMV110112113113A113B200C216218C-1C-2C-3C-5C-7C-9152151-C---*Note:**Note:DescriptionHood Assembly with (6V) Vent ValveGasket, Molded Viton**, 7" OD x 5-3/4" ID x 3/16" wallYoke Assembly, Consisting of:11B Block11C Screw11E Cap Screws11R Retainer11Y Yoke ChannelsHood Assembly with (24V) Vent ValveGasket, Molded Viton**, 8" sq. x 6-1/2" ID x 3/16" wallWrench, combination 11/16" x 6-1/2"Wrench, crowfoot special 1-9/32" x 21"Wrench, socket, 1-13/16" hex x 1" sq. driveWrench extension, 1" sq. drive x 18" with adapterWrench bar, 1" dia. x 20"Wrench, 3/8" sq. box & 1-1/4" open end x 7-1/4"Handwheel Spanner DeviceWrench, 15" adjustableHammer, Machinist 1-1/2 lb.Paint Scraper, 1-1/4" bladeBolt CutterRing, vent valve packingKit Box SealGasket SackTool RollKit Box, 36" x 18-1/2" x 20"Instruction BookletChlorine ManualParts ListsEmergency Kit C weighs 155 lbs. (Shp. Wt. 167 lbs.)Viton is a registered trademark of DuPont Dow ElastomersQuantityPer Kit12111412121111111111115151121CHLORINE INSTITUTECEMERGENCY KIT " " Applications And Parts ListAuthorized, trained personnel equipped with suitable respiratoryequipment should investigate chlorine leaks promptly. All other personsshould be restricted from the affected area. Breathing apparatus or otherpersonal protective equipment are not included in the kits, but must beused when investigating and correcting chlorine leaks and are available113113BHandwheel Spanner Device #216Device 216Note: All C-kit components are now packaged in an extra-largepolyethylene tool box (36" L x 18-1/2" W x 20" H) to allow roomfor fully assembled devices and accessory emergencyequipment.Manufactured to Chlorine Institute Specifications by Indian Springs Mfg. Co., Inc.www.indiansprings.comPhone 315.635.6101 Fax 315.635.7473