Compactors- Brochure

Hydraulic System 1 Gear pump with capacity of 80LPM @ 1000RPM 2 Double acting packer cylinders 2 Double acting Carrier cylinders 1 Double acting telescopic ejection cylinder 2 Single acting tailgate lift cylinders All cylinders are chrome plated Hydraulic tank capacity 170 litres with sight glass In-line strainer inside of tank Return line filter Operating pressure: 180 Bar Packer & Carrier cylinder rods – induction hardened Optional Extra – Lifting Equipment Top Winch – for use with 5.5m³ Skip Bins Container Lifter – for use with 1.75m³ steel bins Mechlift ML805 Low Sill, High Lift – for use with 1.1m³ Sprico standard bins Mechlift ML325K High Level – for use with 120L, 240L, 360L, 660L, 700L and 1100L bins Mechlift ML450 Low Level – for use with 120L, 240L, 360L, 660L, 700L and Lipped Sprico Max 400kgs FEATURES Smooth body construction. Full exterior continuous welds for greater strength and liquid sealing. Constructed with high tensile & abrasion resistant steel. Rubber gasket forms liquid tight seal around bottom & sides of the tailgate. Curb side dual lever packing controls with auto reset & auto engine accelerator. Able to stop & reverse packing cycle. Ejection by double acting telescopic cylinder Manual tailgate locking mechanism. Steps & grab handles for 4 personnel. Buzzer system enables loader to signal driver. Lighting in accordance with the transit standards. Dual level ejection and tailgate lift controls at front of body curb side. 2K automotive paint finish. Sierra Rear End Loading Compactors 13m³ REL Compactor 15m³ REL Compactor Capacity 13.62 m³ 15.30 m³ Height above chassis Frame 1827 mm 1827 mm Body Length 4293 mm 4293 mm Body inside width 2155 mm 2205 mm Body outside width 2316 mm 2366 mm Hopper opening 2080 x 1550 mm 2080 x 1550 mm Approximate body weight 4535 kgs 4632 kgs Loading sill below chassis frame 25 mm 25 mm Packing cycle time 20/22 seconds 20/22 seconds Disposal cycle time 18/22 seconds 18/22 seconds