Concentrix Brochure

Gain maximum force from minimum energy.The Caloris Concentrix™ MVR evaporator is a high-efficiency falling film evaporator system that uses proprietary turbofan technology for Mechanical Vapor Recompression (MVR) heating, driving the evaporation process with electrical power. It delivers the highest available energy and operational efficiencies in a compact evaporator design, evaporating up to 100,000 lbs of water per hour at 160 lbs of water evaporated per kilowatt of power consumed.Proprietary design features yield unequaled results.Built in a concentric configuration, the Concentrix MVR uses proprietary Caloris technology with a standard turbofan wheel to efficiently discharge compressed heating vapors 360 degrees outward from the fan into the surrounding heat exchanger tube bundles. By arranging the heat exchanger bundles around a novel Caloris centrifugal vapor separator vessel and mounting the turbofan in the top of the vapor separator, Caloris eliminates the need for vapor ducting to interconnect the evaporator components.The Concentrix MVR does even more than you’d expect.• Available in chemical grade and 3-A or general food grade sanitary executions.• Recirculated product flow ensures good tube wetting over a wide range of operating capacity, enabling long run times, good turndown, and excellent CIP performance.• Option for addition of boosted heating via Thermal Vapor Recompression (TVR) on the final product section for achieving higher final product concentration.• Regenerative heating of system feed optimizes overall energy efficiency.• Options for efficient integration of feed degassing, HTST pasteurization, product heat treatment, and product cooling, as part of the overall energy balance and compact assembly of the evaporator system.Caloris Concentrix™ MVR Compact EvaporatorThe Concentrix MVR system’s compact design takes half the space of conventional evaporator designs to process the same volume, saving you building and installation costs.Find out more about what the Caloris Concentrix™ MVR can do for your business. Call Caloris at 410.822.6900 or email sales@caloris.com.The Advantages of Falling Film EvaporationFalling film evaporation technology means that only a small quantity of product is held inside the evaporator at any given moment, minimizing the time required for system start-up, rinse-out and shutdown.Caloris Compact EvaporatorsThe Concentrix MVR is one of Caloris’ full line of compact evaporator systems that can be installed and brought online within a matter of days, instead of the weeks or months typical for site-assembled evaporators. Caloris units deliver the most evaporation power within the least square footage and vertical space. Process building costs shrink commensurably.AddressCaloris Engineering, LLC8649 Commerce DriveEaston, MD 21601USATel: +1 410-822-6900Fax: +1 410-822-9006info@caloris.comwww.caloris.comThe Caloris Concentrix™ MVR line covers a wide range of evaporation capacities. With an electrically driven MVR turbofan motor as the primary source of energy, the Concentrix MVR operates with an overall heat balance that in most cases is slightly positive. Only a nominal supply of cooling water is required to remove system waste heat. Where cooling water is not readily available or undesirable in cold climate locations, an air cooler can be integrated.Concentrix Nominal Turbofan Nominal Model Water Compressor Efficiency* Evaporation* (HP) (lbs Evaporated (lbs/hr) H2O/per kW)5 500 5 16050 5,000 50 160100 10,000 100 160200 20,000 200 160300 30,000 300 160400 40,000 400 160500 50,000 500 160600 60,000 600 160700 70,000 700 160800 80,000 800 160900 90,000 900 1601000 100,000 1,000 160* Water from water evaporationConcentrix™ MVR 5 to Concentrix™ MVR 100 models come completely pre-assembled and pre-tested at the factory. Larger models are delivered partially pre-assembled.The Concentrix MVR can be installed and brought online within a matter of days, instead of the weeks or months typical for site-assembled evaporators.Save time. Save money. Do more.• Compact design takes half the space of conventional evaporator designs to process the same volume, saving you building and installation costs.• Pre-engineered for fast delivery.• Short installation and start-up time with the smaller system delivering pre-assembled or partially pre- assembled for the larger systems.• Significant reduction of shipping costs.• Outdoor installations benefit from similar cost savings, including reduced costs for foundations, installation, and eliminating requirements for support and access structures.