Connectors

AXE7, 81 ds_65318_en_a35s: 010611JORDERING INFORMATIONFor board-to-FPCA35S SeriesNarrow pitch connectors(0.35mm pitch)FEATURES1. Ultra small size (Terminal pitch: 0.35 mm, width: 2.5 mm and Mated height: 0.8 mm)The footprint when mated is down approx. 10% from our existing A4S model (60 contacts), contributing to the functionality enhancement and size reduction of target equipment.2. “ ” structure adopted to ensure high resistance to various environments in spite of the ultra-slim space-saving body.3. The world’s first low-profile connector with up to 120 contacts4. The soldering terminals at the four corners enhance the mounting strength.5. The simple lock structure for good mating/unmating operation feel.6. The gull-wing-shaped terminals facilitate imaging inspections.APPLICATIONS• Particularly suitable for board-to-FPC connections in ultra-compact mobile equipment that requires size and thickness reduction and functionality enhancementSocket Header2.0mm2.5mm Suction face: 0.7mmSuction face: 0.7mm2.5mm2.0mmHeaderSocketSoldering terminals at the four cornersSoldering terminals at the four corners12.85 mm (60 contacts)A4S 14.50 mm (60 contacts)12.15 mm (60 contacts)A4S 13.8 mm (60 contacts)Bellows contact construction(Tough against dropping)Ni barrier construction(Tough against solder rise)V notch and Double contact constructions(Tough against foreign particles and flux)Porosity treatment(Tough against corrosive gases)Surface treatment (Contact portion / Terminal portion)4: Base: Ni plating, Surface: Au plating (for Ni barrier available)

4: Base: Ni plating, Surface: Au plating7: Narrow Pitch Connector A35S (0.35 mm pitch) Socket8: Narrow Pitch Connector A35S (0.35 mm pitch) HeaderMated height /

1: For mated height 0.8 mmAXE 421Number of contacts (2 digits)Functions2: Without positioning bossesAXE7, 82ds_65318_en_a35s: 010611JPRODUCT TYPESNotes: 1. Order unit: For mass production: in 1-inner carton (1-reel) unitsSamples for mounting check: in 50-connector units. Please contact our sales office.2. The above part numbers are for connectors without positioning bosses, which are standard. When ordering connectors with positioning bosses, please contact our sales office.3. Please contact us for connectors having a number of contacts other than those listed above.SPECIFICATIONS1.Characteristics2.Material and surface treatmentMated height Number of contactsPart number PackingSocket Header Inner carton (1-reel) Outer carton0.8mm34 AXE734124 AXE8341245,000 pieces 10,000 pieces50 AXE750124 AXE85012460 AXE760124 AXE860124100 AXE700124 AXE800124120 AXE7A2124 AXE8A2124Item Specifications ConditionsElectricalcharacteristicsRated current 0.25A/contact (Max. 4 A at total contacts)Rated voltage 60V AC/DCBreakdown voltage 150V AC for 1 min. No short-circuiting or damage at a detection current of 1 mA when the specified voltage is applied for one minute.Insulation resistance Min. 1,000M? (initial) Using 250V DC megger (applied for 1 min.)Contact resistance Max. 100m? Based on the contact resistance measurement method specified by JIS C 5402.MechanicalcharacteristicsComposite insertion force Max. 0.981N/contacts ? contacts (initial)Composite removal force Min. 0.165N/contacts ? contactsContact holding force (Socket contact) Min. 0.20N/contactsMeasuring the maximum force.As the contact is axially pull out.EnvironmentalcharacteristicsAmbient temperature –55?C to +85?C No freezing at low temperatures. No dew condensation.Soldering heat resistancePeak temperature: 260?C or less (on the surface of the PC board around the connector terminals) Infrared reflow soldering300?C within 5 sec. 350?C within 3 sec. Soldering ironStorage temperature –55?C to +85?C (product only)–40?C to +50?C (emboss packing) No freezing at low temperatures. No dew condensation.Thermal shock resistance(header and socket mated)5 cycles,insulation resistance min. 100M?,contact resistance max. 100m?Sequence1. –55 ?C, 30 minutes2. ~ , Max. 5 minutes3. 85 ?C, 30 minutes4. ~ , Max. 5 minutesHumidity resistance(header and socket mated)120 hours,insulation resistance min. 100M?,contact resistance max. 100m?Bath temperature 40?2?C,humidity 90 to 95% R.H.Saltwater spray resistance(header and socket mated)24 hours,insulation resistance min. 100M?,contact resistance max. 100m?Bath temperature 35?2?C,saltwater concentration 5?1%H2S resistance(header and socket mated)48 hours,contact resistance max. 100m?Bath temperature 40?2?C, gas concentration 3?1 ppm, humidity 75 to 80% R.H.Lifetime characteristics Insertion and removal life 30 timesRepeated insertion and removal speed of max. 200 times/hoursUnit weight 60 contact type: Socket: 0.03 g Header: 0.02 gPart name Material Surface treatmentMolded portionLCP resin (UL94V-0) —Contact and Post Copper alloyContact portion: Base: Ni plating, Surface: Au platingTerminal portion: Base: Ni plating, Surface: Au plating (except the terminal tips)The socket terminals close to the portion to be soldered have nickel barriers (exposed nickel portions).Soldering terminals: Sockets: Base: Ni plating, Surface: Pd+Au flash plating (except the terminal tips)Headers: Base: Ni plating, Surface: Au plating (except the terminal tips)0?3?30AXE7, 83 ds_65318_en_a35s: 010611JDIMENSIONS(Unit: mm)• Socket and Header are matedInterested in CAD data? You can obtain CAD data for all products with a mark from your local Panasonic Electric Works representative.CAD DataSocket (Mated height: 0.8 mm)0.08(Contact and soldering terminals)Terminal coplanarityY noteZ note0.772.20AB±0.10.12±0.030.35±0.050.70 (Suction face)0.30±0.03C±0.1(0.90)1.06(0.39)2.502.501.72General tolerance: ?0.2Note: Since the soldering terminals has a single-piece construction, sections Y and Z are electrically connected.Dimension table (mm)Number of contacts/dimension A B C34 8.3 5.6 7.250 11.10 8.40 10.0060 12.85 10.15 11.75100 19.85 17.15 18.75120 23.35 20.65 22.25CAD DataHeader (Mated height: 0.8 mm)0.08(Post and soldering terminals)Terminal coplanaritySoldering terminalsSoldering terminals0.650.12±0.03C±0.1(0.31)0.841.461.420.70 (Suction face)0.12±0.030.35±0.05B±0.1A(0.36)2.001.28General tolerance: ?0.2Dimension table (mm)Number of contacts/dimension A B C34 7.6 5.6 7.050 10.40 8.40 9.8060 12.15 10.15 11.55100 19.15 17.15 18.55120 22.65 20.65 22.05CAD DataSocketHeader 0.80±0.1AXE7, 84ds_65318_en_a35s: 010611JEMBOSSED TAPE DIMENSIONS (Unit: mm)• Dimension table (Unit: mm)• Connector orientation with respect to embossed tape feeding directionNOTESFor Cautions for Use, see the “GENERAL NOTES ON USING ADVANCED SERIES NARROW-PITCH CONNECTORS” of the Connector Technical Information. For other details, please verify with the product specification sheets.Type/Mated height Number of contacts Type of taping A B C D Quantity per reelCommon for sockets and headers 0.8mm34, 50, 60 Tape I 24.0 — 11.5 25.4 5,000100 Tape II 32.0 28.4 14.2 33.4 5,000120 Tape II 44.0 40.4 20.2 45.4 5,000• Specifications for taping(In accordance with JIS C 0806-1999. However, not applied to the mounting-hole pitch of some connectors.)• Specifications for the plastic reel(In accordance with EIAJ ET-7200B.)(A±0.3)8.0(2.0)(4.0)(B)(C)(1.75)Leading direction after packaging(A )+0.3-0.18.0(2.0)(4.0)(C)(1.75)Tape I Tape II1.5 +0.10 dia.1.5 +0.10 dia.Embossed mounting-holeTaping reelTop cover tapeEmbossed carrier tape(D±1)380 dia.TypeDirection of tape progressCommon for A35S Socket HeaderNote: There is no indication on this product regarding top-bottom or left-right orientation.?Regarding the design of PC board patternsConduct the recommended foot pattern design, in order to preserve the mechanical strength of terminal solder areas.?Recommended PC board and metal mask patternsAppropriate control of solder amount is required to minimize solder bridges and other defects for connectors with 0.35-mm, 0.4-mm or 0.5-mm pitch terminals, which require high-density mounting. Refer to the right-hand drawing for recommended patterns.• Socket (Mated height: 0.8 mm)Recommended PC board pattern (TOP VIEW)Recommended metal mask opening patternMetal mask thickness: When 120?m(Terminal opening ratio: 70%)(Metal-part opening ratio: 100%)• Header (Mated height: 0.8 mm)Recommended PC board pattern (TOP VIEW)Recommended metal mask opening patternMetal mask thickness: When 120?m(Terminal opening ratio: 70%)(Metal-part opening ratio: 100%)0.20±0.031.06±0.032.90±0.03(0.50)(0.92) 0.35±0.030.90±0.031.35±0.031.90±0.030.20±0.03C 0.30: Insulatin area1.06±0.012.90±0.011.35±0.010.90±0.010.35±0.01(0.92)C 0.302.80±0.010.18±0.01(0.39)2.02±0.010.35±0.030.45±0.030.70±0.030.60±0.031.66±0.03(0.53)(0.65)1.10±0.032.40±0.030.20±0.03(0.53)(0.50)0.70±0.010.60±0.011.66±0.010.45±0.010.35±0.012.30±0.010.18±0.011.30±0.01