Controllers-SC400

BIJUR DELIMON INTERNATIONAL(919) 465 4448 LOCAL (800) 631 0168 TOLL-FREE (919) 465 0516 FAX www.bijuRdELimOn.COm2100 Gateway Centre blvd., Suite 109 morrisville, nC 2756035980 • R2 10/101SC400 Controllermulti-functionGeneralThe SC400 Controller is a full featured lubrication control, offering “two plus one” functionality: Two independent lubrication zones may be programmed with a single controller, plus control of one automatic reservoir fill system. The SC400 Controller has the ability to operate a single pump and two zone valves (e.g. frequent/infrequent lubrication cycles) or two separate pumps (e.g. one oil pump & one grease pump). Each zone operates independently. (“Two zone” feature is not available for dualine electric systems or for systems that require after blow). For single zone systems, the SC400 Controller also offers two intervals (e.g. weekday /weekend). using an external switch, the customer can quickly change lubrication intervals between two sets of off time. The SC400 also incorporates an automatic fill feature. The controller can activate a fill pump as needed to maintain proper fluid levels in the oil or grease reservoir.ApplicationThe SC400 operates in any of five system modes:Series Progressive +Single Line injector +dualine (Hydraulic Reversing Valve) +dualine (Electric Reversing Valve) +Continuous +Technical DataInput Voltage 85 to 265 VAC, 50/60 HzCurrent Consumption 80 mA at 115 VAC (less load) 40 mA at 230 VAC (less load)Pump Output Rating 8 amp (85 to 265 VAC)Output Rating (line A & B) 8 amp (90 to 250 VAC)Enclosure Rating iP-56Ambient Temp. Range 14°F to 131°F (-10°C to 55°C)Storage Temp. Range -40°F to 185°F (-40°C to 85°C)Vibration 2 g at resonant (3 axis)Idle Time Range 1 second to 100 daysMachine Cycle Counts 1 to 999,999 Counts (30 counts/second at 50% duty cycle)Watchdog Timer 1 second to 60 minutesMonitor Time 1 second to 24 hoursTiming Accuracy 0.01% (crystal controlled)Cycle Counts On 1 to 999 countsOver Counts 0 to 9Net Weight 5 lbLength x Width x Height 12.3” x 9.2” x 5”Permanent Memory FLASHFault Relay Contacts 5 ampBIJUR DELIMON INTERNATIONAL(919) 465 4448 LOCAL (800) 631 0168 TOLL-FREE (919) 465 0516 FAX www.bijuRdELimOn.COm2100 Gateway Centre blvd., Suite 109 morrisville, nC 2756035980 • R2 10/102FeaturesPump output may be powered externally or via control power. +Valve A, Valve b, and Fill pump may be powered externally or via control power. +Critical inputs accept PnP, nPn, or mechanical switches. +500 mA of 24 VdC is available to power customer’s accessories. +Primary alarm inputs may be programmed for n.O. or n.C. functionality. +Separate Fault and warning outputs-alarms may be monitored independently of +non-critical events.2 zone operation (for Progressive, injector and dualine Hydraulic systems) +iP-56 enclosure, constructed of molded polyester fiberglass. +CE approved +Four supported languages (English, French, Spanish, German). +machine watchdog and cycle monitoring. +Pause (stand-by), jog (manual operation). +Accepts all bdi electric reversing valves and cycle/pressure/“end-of-line” switches. +System ModesOption availability depends on mode and the customers system. use the table below to determine active options.Available Features Continuous Series Progressive Singe Line Injector Dualine Hydraulic Dualine Electric2 Zones 1 X X X2 Intervals 1 X X X XPurge (Afterblow) 2 X X XAuto Fill Control X X X X XLubrication System Cycle & Pressure Switch MonitoringX X X X XMachine Count Cycle Switch MonitoringX X X XLubrication Base Pump On Time OptionsTime X XMachine Cycles X XDualine Half Cycle X XDualine Full Cycle X XIdle Base Pump Off Time OptionsTime X X X XMachine Cycles X X X X1 Via parameter, customer may select either 2 zones or 2 intervals. 2 Purge is not available in 2 zone systems.How to OrderName Part #SC400 Controller SC400when ordering, specify by name and part number, e.g. SC400 Controller, Part #SC400.BIJUR DELIMON INTERNATIONAL(919) 465 4448 LOCAL (800) 631 0168 TOLL-FREE (919) 465 0516 FAX www.bijuRdELimOn.COm2100 Gateway Centre blvd., Suite 109 morrisville, nC 2756035980 • R2 10/103Dimensional Schematics Measurements shown in inches.4.989.2012.33