Conveyor Covers Brochure

DimensionsSpecialized mounting systems ensure solid fit to any system in any environmentStandard Foot 15º FootSupport bands and hoods are made of G90 galvanized material and are also available in aluminum and stainless steel construction.Our unique cover design prevents ingress of water into the reinforced edge reducing the possibility of corrosion.Symmetrical design of standard covers allows for easy placement on structure, quick installation and safe access to both sides of the belt.Open position brackets hold the hoods in place while accessing the conveyor.Support bands have correctly positioned holes for mounting of eye bolts for safety pull-cords.3/4 Hoods allow quick viewing of belt from one side.A tight fit between the bottom edge of the hood and support band help to ensure best protection.Wide support bands prevent gaps and improve weather seal.Full Hood3/4 HoodBELT WIDTH “A” “B” 3/4 HOOD PART # WEIGHT SUPPORT BAND PART # WEIGHTin. mm in. mm in. mm 22 GA. lbs. kg 12 GA. lbs. kg18 457 27 686 16-1/4 413 BCAG1H304571219 21 9.5 BCAGGA0457 11 5.024 610 33 838 19-1/4 489 BCAG1H306101219 24 10.9 BCAGGA0610 13 5.930 762 39 991 22-1/4 565 BCAG1H307621219 27 12.3 BCAGGA0762 14 6.436 914 45 1143 25-1/4 641 BCAG1H309141219 31 14.1 BCAGGA0914 16 7.342 1067 51 1295 28-1/4 718 BCAG1H310671219 34 15.5 BCAGGA1067 17 7.748 1219 57 1448 31-1/4 794 BCAG1H312191219 37 16.8 BCAGGA1219 19 8.654 1372 63 1600 34-1/4 870 BCAG1H313721219 40 18.2 BCAGGA1372 20 9.160 1524 69 1753 37-1/4 946 BCAG1H315241219 43 19.5 BCAGGA1524 22 10.0BELT WIDTH “A” “B” HOOD PART # WEIGHT SUPPORT BAND PART # WEIGHTin. mm in. mm in. mm 22 GA. lbs. kg 12 GA. lbs. kg18 457 27 686 16-1/4 413 BCAG1H404571219 28 12.7 BCAGGA0457 11 5.024 610 33 838 19-1/4 489 BCAG1H406101219 32 14.5 BCAGGA0610 13 5.930 762 39 991 22-1/4 565 BCAG1H407621219 36 16.4 BCAGGA0762 14 6.436 914 45 1143 25-1/4 641 BCAG1H409141219 41 18.6 BCAGGA0914 16 7.342 1067 51 1295 28-1/4 718 BCAG1H410671219 46 20.9 BCAGGA1067 17 7.748 1219 57 1448 31-1/4 794 BCAG1H412191219 49 22.3 BCAGGA1219 19 8.654 1372 63 1600 34-1/4 870 BCAG1H413721219 53 24.1 BCAGGA1372 20 9.160 1524 69 1753 37-1/4 946 BCAG1H415241219 57 25.9 BCAGGA1524 22 10.0Conveyor covers are used to protect transported material and conveyor belting, idlers and structure. They effectively improve personnel safety, reduce loss of material to wind and stop grime and rain from damaging the idlers and belt.At Continental Conveyor we take pride in the manufacturing of our conveyor covers. We focus on the entire conveyor cover solution by offering:• specialized mounting brackets for special types of conveyor structure,• extended sides to enclose the return belt run, and non-standard support band centres and hood profiles to accommodate horizontal and vertical curves.Our goal is to ensure that your material is protected and under cover.Conveyor CoversLocationsContinental Conveyor (Ontario) Ltd.100 Richmond Blvd.Napanee, OntarioCanada K7R 3S3Tel.: (613) 354-3318Fax: (613) 354-5789Continental Conveyor and Machine Works Ltd.470 St-Alphonse Street SouthThetford Mines, QuebecCanada G6G 3V8Tel.: (418) 338-4682Fax: (418) 338-4751Website: www.continentalconveyor.caOur product range includes: • belt conveyors • screw conveyors • en-masse chain conveyors • bucket elevators • screw reclaimers • stoker reclaimers • vibrating feeders and conveyors • bin activators • apron feeders • weighfeeders • belt conveyor components; · pulleys · idlers · scrapers · covers · impact cassettes · skirt board systems · specialty rubber productsContinental ConveyorContinental covers protect the transported material on a 42” wide conveyor with horizontal and vertical curves.Continental Conveyor, established since 1963, specializes in the design, engineering and manufacture of mechanical bulk materials handling equipment and systems. Industries served include: cement, pulp and paper, mining, reconstituted wood products, smelting and reduction, quarrying, chemical, power plants, ports, and marine trans-shipping.Production is rationalized between 2 modern plants located in Thetford Mines, Quebec and Napanee, Ontario. Production facilities include 40,000 square feet in Thetford Mines and 26,000 square feet in Napanee. Each plant is well equipped with the necessary fabrication equipment such as plate shears, press brakes, plate bending rolls, pantographs, and numerous welding stations and positioners of a variety of types. Each plant has a machine shop that is able to perform most of the turning, milling and boring that is required for the equipment being manufactured. Both plants have their own indoor facilities for shot-blast cleaning and painting.Out total staff includes: 80 plant employees, 16 mechanical designers using AutoCAD, 3 professional engineers (2 mechanical & 1 structural), 3 project managers, 10 sales and approximately 10 support and administrative staff. Of the design and project management staff, 6 have extensive experience in supervising the installation and starting-up/commissioning of all the types of equipment that we supply. Together they have a wide range of problem solving skills gained from projects in many of different industries and locations.