Corning Incorporated
- Home
- Companies & Suppliers
- Corning Incorporated
- Downloads
- Corning DuraTrap - Particulate Filters ...
Corning DuraTrap - Particulate Filters for Light-Duty Diesel Emissions Systems Brochure
Diesel engines are an increasingly popular choice for fuel-efficient passenger cars and light-duty trucks. Advanced filters support the drive to improve fuel efficiency and meet tighter regulations. Corning® DuraTrap® AT diesel particulate filters use advanced materials and monolithic design to deliver:• High filtration efficiency • Excellent pressure drop performance• Enhanced durability Clean Diesel Made PossibleParticulate filters for diesel emissions systems Corning® DuraTrap® AT FiltersCorning’s aluminum titanate (AT) composition enables high performance light-duty filters by combining low coefficient of thermal expansion (CTE) with high heat capacity.Porous Material* Aluminum Titanate Silicone Carbide (TiAl2O5) (SiC)CTEc (x10-7/°C)Intrinsic Density (g/cm3)Volumetric Heat Capacity @ 500°C (J/cm3 K) 10 45 3.40 3.24 3.60 3.63 Asymmetric Cell Technology (ACT): larger inlet, smaller outlet** Performance Corning DuraTrap® AT filters use a stabilized aluminum titanate for outstanding performance and durability. Introduced in 2005, these filters have been proven in millions of vehicles. Corning’s aluminum titanate material provides low thermal expansion to enable durable monolithic construction that allows for:• Low pressure drop and excellent regeneration efficiency to help improve fuel consumption• Increased ash storage capacity and larger filtration surface area compared to segmented filters Additionally, its engineered pore structure enables customers to meet particulate mass and number emissions regulations worldwide. Innovative Design The extrude to shape monolithic design can be produced in a variety of sizes and optimized for systems with space constraints and diverse configurations. Corning’s innovative asymmet- ric cell technology (ACT) is an option that helps manage lifetime pressure drop requirements and provides Relative Coated Filter Pressure Drop on Engine Dynomometer at 6g/L Soot Load*Corning® DuraTrap® AT FiltersBrazilCorning International São Paulo Phone: 55-11-3089-7400ChinaCorning (Shanghai) Company, Ltd. Pudong, Shanghai Phone: 86-21-5055-4888GermanyCorning GmbH Wiesbaden Phone: 49-611-7366-0RussiaOOO Corning SNG Moscow Phone: 7-495-777-2400 United StatesCorning Incorporated Troy, Michigan Phone: 248-680-4701Corning Incorporated Corning, New York Phone: 607-974-9000IndiaCorning S.A.S. India Branch Office Gurgaon - 122 002, Haryana Phone: 91-124-460 4000JapanCorning International K.K. Tokyo Phone: 81-3-3586-5002KoreaCorning Korea Company, Ltd. Gangnam-Gu, Seoul Phone: 82-2-796-9500www.corning.com/ environmentaltechnologiesGlobal e-mail:environmental@corning.com*Except as otherwise noted, the charts and graphs used in this publication are based on data from experimental and limited tests conducted under controlled laboratory conditions sponsored by Corning Incorporated. Corning can provide additional calculations or test results based on specific operating conditions. **Unplugged to highlight ACT geometric design. Filters will have alternating plugged channels.Corning and DuraTrap are registered trademarks of Corning Incorporated. 1/2012 DTATCorning DuraTrap® AT 300/13 filter ash storage benefits through larger inlet channels. Standard Cell Geometry & Sizes• 300 cells per square inch • 13 mil wall thickness• Standard diameter sizes range from 5” to 13”• Custom sizes may be available upon requestProduct Benefits* SiC DuraTrap®ATPressure Drop - +Soot Mass Limit + +Particulate Number & Mass + +Regeneration Efficiency - +Ash Storage Capacity - +Filtration Area - +120%100%40%80%20%60%0%30% improvementCompetitive SiC 300/12 DuraTrap® AT 300/13 ACT
Most popular related searches
