CT-Cense Brochure (PDF 105 KB)

“Technology for Water Quality Monitoring” BENEFITS: ? Single point calibration ? Installs in standard 1.5” or 2” corporation stop ? No bypass plumbing or piping required. Inserts directly into distribution piping up to 180 mm (72 inches in diameter). FEATURES: ? Data available in RS232 format or via 4-20 mA using optional MIM or junction box ? Automatic compensation for light source variability ? Low and high range turbidity. Measures scattered light at 90o to transmitted beam. Operates in 840-920 nm band to reduce effects of sample color ? IP68 enclosure, optional internal logger card ? Optional flow cell and MSM adaptors available ? Collection and analysis of data using Cense-Tool software ClearCense™ simultaneously measures: ? Color ? Turbidity ? Temperature CT-Cense™ Color and Turbidity Sensor CT-Cense™ is a Color and Turbidity sensor that can measure critical water quality parameters anywhere in the distribution system. Color and Turbidity are prime indicators of problems associated with distribution piping, wells, and low use zones. Customer complaints are generally focused on these two parameters. This sensor is packaged in a 36 mm stainless steel probe designed for insertion into pressurized distribution systems up to 250 PSI and in pipes from 2 to 72 inches in diameter. This capability makes CT-Cense™ ideally suited to fulfill the requirements of water utilities to monitor the water throughout their distribution system. The unit is easy to install, simple to calibrate and is designed for durability and minimum operator maintenance. Censar Technologies, LLC 2825 Mount Pleasant St Suite 34 Burlington, IA 52601 USA Tel 866-423-6727 Outside USA (001)-319-758-6192 Fax 866-623-6727 w w w . c e n s a r . c o m CT-Cense? Sensing Head CT-Cense? Probe Head “Technology for Water Quality Monitoring” Monitoring Applications: r Turbidity Range 0.1 – 20 NTU (drinking water applications) 1 – 200 NTU (higher range) Wavelength 840 – 920 nm (90° scatter) Resolution <0.1 NTU Color Wavelength 400-460 nm (direct absorption) Operating Range 0 – 50 Hazen (drinking water) 0 – 50 EBC 0 – 2 CU Resolution 0.5 Hazen or ± 2% reading Temperature Range 0 – +50° C Sensitivity <0.1% Accuracy ±0.25° C or ±0.1% of reading (whichever is greater) General Operating Conditions Flow 0.001 – 2m/S Pressure 16 Bar continuous, 25 Bar Peak Electronics Enclosure Temperature -10°C to +60°C Housing IP68 Probe Head Diameter 36 mm Fittings Fits 1.5” or 2” BSPP (using adaptor) Pressure tested to 25 bar, 16 bar continuous Electronics Standard RS232 or available with 4-20 mA output option. Power Supply: 12 Volts DC Isolated (optional battery available) or via 110/240 Volt (optional AC supply) Performance in the field subject to installation conditions and regular calibration. Censar Technologies, LLC 2825 Mount Pleasant St Suite 34 Burlington, IA 52601 USA Tel 866-423-6727 Outside USA (001)-319-758-6192 Fax 866-623-6727 w w w . c e n s a r . c o m CT-Cense™ Specifications* Our goal is to provide the most cost-effective water quality monitoring technology worldwide Direct Pipe Insertion Flexi Version for Installation into MSM Adaptor